Bottlenecked!!

[Ruckledge]

getting this performance in red dead 2

My specs:

cpu: R5 3600:

gpu: RTX 2060

ram: Corsair Vengeance 3000mghz 16gb(8x2)

mobo: gigabyte b450 aorus elite

psu: mwe 750

[Fasauceome]

did you try directX?

[.Apex.]

10 minutes ago, Ruckledge said:

getting this performance in red dead 2

My specs:

cpu: R5 3600:

gpu: RTX 2060

ram: Corsair Vengeance 3000mghz 16gb(8x2)

mobo: gigabyte b450 aorus elite

psu: mwe 750

Check your CPU Clocks or what's using your CPU in the background because it's reaching 90%+ and from the videos I've seen an R5 3600 doesn't even come close to that in RDR2.

[Entropy.]

13 minutes ago, Ruckledge said:

getting this performance in red dead 2

My specs:

cpu: R5 3600:

gpu: RTX 2060

ram: Corsair Vengeance 3000mghz 16gb(8x2)

mobo: gigabyte b450 aorus elite

psu: mwe 750

Remember that rd2 pc is famously underoptimized. Its better now, but still not great. Bitwit struggled to get over 100 fps with a 9900k and 2 overclocked 2080ti's... with the entire system watercooled- but that was at launch.

[asfdvv]

Try looking up a guide on optimal settings, new AAA titles tend to drop fps significantly due to just a few effects that may or may not even be that pretty. I've been able to get significant gains on new triple A's on launch day without even turning down 90% of the settings from the max. Hardware Unboxed has done 2 videos on RDR2.

 

 

[Ruckledge]

23 minutes ago, Fasauceome said:

did you try directX?

direct x is worse.... getting 36 at the same place

[Ruckledge]

17 minutes ago, _Syn_ said:

Check your CPU Clocks or what's using your CPU in the background because it's reaching 90%+ and from the videos I've seen an R5 3600 doesn't even come close to that in RDR2.

Clocks r stock

just got the cpu today

i cant understand why the cpu usage is at 100%

in task manager the usage is 99%-100%

[.Apex.]

Just now, Ruckledge said:

Clocks r stock

just got the cpu today

i cant understand why the cpu usage is at 100%

in task manager the usage is 99%-100%

Even so, you have to check if your CPU is actually reaching the proper frequency under load, and see what's using your CPU to 100%, is it all being used by RDR2?

[Gohardgrandpa]

22 minutes ago, Ruckledge said:

Clocks r stock

just got the cpu today

i cant understand why the cpu usage is at 100%

in task manager the usage is 99%-100%

1080p 1440p max settings, high settings? Not much info to work with here

[Ruckledge]

23 minutes ago, Gohardgrandpa said:

1080p 1440p max settings, high settings? Not much info to work with here

1080p 
using these settings:

 

[Ruckledge]

45 minutes ago, _Syn_ said:

Even so, you have to check if your CPU is actually reaching the proper frequency under load, and see what's using your CPU to 100%, is it all being used by RDR2?

"Even so, you have to check if your CPU is actually reaching the proper frequency under load"

---How to check that???

[.Apex.]

1 minute ago, Ruckledge said:

"Even so, you have to check if your CPU is actually reaching the proper frequency under load"

---How to check that???

Use HWiNFO (Check sensors-only) to see your Clocks and Temps.

[Ruckledge]

6 minutes ago, _Syn_ said:

Use HWiNFO (Check sensors-only) to see your Clocks and Temps.

[.Apex.]

@Ruckledge

You seem to have only 2 cores enabled, can you confirm in Task Manager>Performance>CPU, how many cores do you see?

 

And when you run HWiNFO click on Sensors-only

[Ruckledge]

Just now, _Syn_ said:

@Ruckledge

You seem to have only 2 cores enabled, can you confirm in Task Manager>Performance>CPU, how many cores do you see?

 

And when you run HWiNFO click on Sensors-only

yes it says 2 in Cores

how do i fix this?????

[.Apex.]

Just now, Ruckledge said:

yes it says 2 in Cores

how do i fix this?????

Go into your BIOS and reset it, you might have messed with the settings there and disabled your cores.

[Ruckledge]

Just now, _Syn_ said:

Go into your BIOS and reset it, you might have messed with the settings there and disabled your cores.

Ok let me try

[Ruckledge]

4 minutes ago, _Syn_ said:

Go into your BIOS and reset it, you might have messed with the settings there and disabled your cores.

Before i do anything just check this once to be sure::

[.Apex.]

Just now, Ruckledge said:

Before i do anything just check this once to be sure:

Yeah that's not right, you're only making use of 1/3 of your CPU.

[Ruckledge]

2 minutes ago, _Syn_ said:

Yeah that's not right, you're only making use of 1/3 of your CPU.

Found this???

will it work??

he had the same problem 

[.Apex.]

7 minutes ago, Ruckledge said:

Found this???

will it work??

he had the same problem 

You could try, but first reset the BIOS, it won't hurt to reset it.

[Ruckledge]

1 minute ago, _Syn_ said:

You could try, but first reset the BIOS, it won't hurt to reset it.

Bro it solved the issue.

Thanks Bro i almost had a heart attack if u had'nt pointed out i would have never noticed

Just Installing the Ryzen Master software fixed the issue

now i get 80 ups in valentine  in rdr 2