Jump to content

Using a NAS over wifi

Go to solution Solved by LIGISTX,
On 2/6/2020 at 2:44 PM, oscarmorgan said:

Hey,

 

Thanks for your reply, it will just be 8tb running in raid 1. It has a i5-4590 and 8gb of DDR3 and will only be used by me sort of as a place to dump all my old projects, (around 10gb each). I understand it wont be crazy fast but what sort of speeds could i expect?

 

Cheers

Wifi can be faster then gigabit depending on the situation. But, it’s extremely unlikely that will actually be the use case you end up with. But it should be “fine”. 

Hi,

 

I'm currently building a nas purley to archive projects, it has decent specs but I have no way to connect it to my router. Will connecting it to wifi, (with a decent neetwork card), be painfully slow to use over wifi and/or ethernet? I'm using Google Wifi.

 

Thanks heaps

Link to comment
https://linustechtips.com/topic/1152709-using-a-nas-over-wifi/
Share on other sites

Link to post
Share on other sites

4 minutes ago, oscarmorgan said:

Hi,

 

I'm currently building a nas purley to archive projects, it has decent specs but I have no way to connect it to my router. Will connecting it to wifi, (with a decent neetwork card), be painfully slow to use over wifi and/or ethernet? I'm using Google Wifi.

 

Thanks heaps

I mean, I guess it very much depends what you consider slow, and what the use case is.

 

What kinda NAS are you building? What do you need it for? My homelab is also my NAS, it runs FreeNAS under ESXi, and for my use case I bet I could get away with it over wifi, I have it wired..... but I bet it wouldn't matter either way. But its a single user, with mostly large file reads (movies/tv shows streamed over plex), some smaller files which are RAW DSLR pix, but hard to say for sure.

Rig: i7 13700k +Contact Frame - - Asus Z790-P Wifi - - RTX 4080 - - 4x16GB 6000MHz - - Samsung 990 Pro 2TB NVMe Boot + Main Programs - - Crucial P3 2TB NVMe for photo work - - Corsair RM850x - - Sound BlasterX EA-5 - - Corsair XC8 JTC Edition - - Corsair GPU Full Cover GPU Block - - PTM 7950 - - XT45 X-Flow 420 + UT60 280 rads externally mounted - - EK XRES RGB PWM - - Fractal Define S2 - - DellAlienware AW3423DWF 34" -- Logitech Pro X Superlight - - Logitech G710+ - - LTT Northern Lights Deskpad

 

Headphones/amp/dac: Schiit Bifrost Multibit - -  Schiit Lyr 3 - - Fostex TR-X00 - - Sennheiser HD 6xx

 

Homelab/Media Server: Proxmox VE host - - 512 NVMe Samsung 980 RAID Z1 for VM's/Proxmox boot - - Xeon e5 2660 V4- - Supermicro X10SRF-i - - 128 GB ECC 2133 - - 10x8TB WD Red RAID Z2 - - 2x 800 GB SAS SSD’s (1 SLOG, 1 L2Arc) - - 45 HomeLab HL15 15 Drive 4U - - Corsair RM650i - - LSI 9305-16i HBA - - TreuNAS + many other VM’s

 

Unifi UDM Pro in front of full unifi network infrastructure

 

iPhone 17 Pro - - MacBook Air M3

Link to comment
https://linustechtips.com/topic/1152709-using-a-nas-over-wifi/#findComment-13274563
Share on other sites

Link to post
Share on other sites

16 hours ago, LIGISTX said:

I mean, I guess it very much depends what you consider slow, and what the use case is.

 

What kinda NAS are you building? What do you need it for? My homelab is also my NAS, it runs FreeNAS under ESXi, and for my use case I bet I could get away with it over wifi, I have it wired..... but I bet it wouldn't matter either way. But its a single user, with mostly large file reads (movies/tv shows streamed over plex), some smaller files which are RAW DSLR pix, but hard to say for sure.

Hey,

 

Thanks for your reply, it will just be 8tb running in raid 1. It has a i5-4590 and 8gb of DDR3 and will only be used by me sort of as a place to dump all my old projects, (around 10gb each). I understand it wont be crazy fast but what sort of speeds could i expect?

 

Cheers

Link to comment
https://linustechtips.com/topic/1152709-using-a-nas-over-wifi/#findComment-13276540
Share on other sites

Link to post
Share on other sites

Just a note, Unraid does not support WiFi. Don't know it's a way to modify it so it does, but it don't out of the box.

“Remember to look up at the stars and not down at your feet. Try to make sense of what you see and wonder about what makes the universe exist. Be curious. And however difficult life may seem, there is always something you can do and succeed at. 
It matters that you don't just give up.”

-Stephen Hawking

Link to comment
https://linustechtips.com/topic/1152709-using-a-nas-over-wifi/#findComment-13277323
Share on other sites

Link to post
Share on other sites

On 2/6/2020 at 2:44 PM, oscarmorgan said:

Hey,

 

Thanks for your reply, it will just be 8tb running in raid 1. It has a i5-4590 and 8gb of DDR3 and will only be used by me sort of as a place to dump all my old projects, (around 10gb each). I understand it wont be crazy fast but what sort of speeds could i expect?

 

Cheers

Wifi can be faster then gigabit depending on the situation. But, it’s extremely unlikely that will actually be the use case you end up with. But it should be “fine”. 

Rig: i7 13700k +Contact Frame - - Asus Z790-P Wifi - - RTX 4080 - - 4x16GB 6000MHz - - Samsung 990 Pro 2TB NVMe Boot + Main Programs - - Crucial P3 2TB NVMe for photo work - - Corsair RM850x - - Sound BlasterX EA-5 - - Corsair XC8 JTC Edition - - Corsair GPU Full Cover GPU Block - - PTM 7950 - - XT45 X-Flow 420 + UT60 280 rads externally mounted - - EK XRES RGB PWM - - Fractal Define S2 - - DellAlienware AW3423DWF 34" -- Logitech Pro X Superlight - - Logitech G710+ - - LTT Northern Lights Deskpad

 

Headphones/amp/dac: Schiit Bifrost Multibit - -  Schiit Lyr 3 - - Fostex TR-X00 - - Sennheiser HD 6xx

 

Homelab/Media Server: Proxmox VE host - - 512 NVMe Samsung 980 RAID Z1 for VM's/Proxmox boot - - Xeon e5 2660 V4- - Supermicro X10SRF-i - - 128 GB ECC 2133 - - 10x8TB WD Red RAID Z2 - - 2x 800 GB SAS SSD’s (1 SLOG, 1 L2Arc) - - 45 HomeLab HL15 15 Drive 4U - - Corsair RM650i - - LSI 9305-16i HBA - - TreuNAS + many other VM’s

 

Unifi UDM Pro in front of full unifi network infrastructure

 

iPhone 17 Pro - - MacBook Air M3

Link to comment
https://linustechtips.com/topic/1152709-using-a-nas-over-wifi/#findComment-13281944
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×