Computer not display anything

[YourBoiConnor]

I was DDUing my graphics card from a 5700xt to a 1070 ti. I plugged in the new graphics card and now my computer won't display a picture even though the fans are working.

 

specs

CPU: I7-7700k

Motherboard: Asus prime H270M-plus

Videocards: Thicc 2 5700xt and Asus ROG 1070 ti

RAM: Gskill 16gb 2133mhz

Power Supply: Corsair CX600

[SpookyCitrus]

Do you have both cards in the machine at the same time?

When you used DDU what option did you choose?

Was the computer on when you swapped the GPUs?

[YourBoiConnor]

I did not have them both in the same time 

I chose the option that shuts down the computer after

No

[paddy-stone]

What output are you using? sometimes it will default to HDMI for example, try hooking up an HDMI cable just to check.

[YourBoiConnor]

I've tested every output on both cards and with the integrated graphics on the cpu @paddy-stone

[paddy-stone]

Hmm, this is a puzzler. I mean you can try resetting CMOS to see if that does anything, but I doubt it. Did you try another display, or confirm that the display is still working with another device/pc at least?

 

The only "advice" I can give you other than what's already been said, is that maybe something shorted out somehow during the swap as unlikely as that should be, I can't think of anything else if all the power connections were attached etc... even then it wouldn't explain it still not working with integrated. If I think of anything else I'll get back to ya though.

 

 

[YourBoiConnor]

52 minutes ago, paddy-stone said:

Hmm, this is a puzzler. I mean you can try resetting CMOS to see if that does anything, but I doubt it. Did you try another display, or confirm that the display is still working with another device/pc at least?

 

The only "advice" I can give you other than what's already been said, is that maybe something shorted out somehow during the swap as unlikely as that should be, I can't think of anything else if all the power connections were attached etc... even then it wouldn't explain it still not working with integrated. If I think of anything else I'll get back to ya though.

 

 

We know that the display works fine. How do I reset the CMOS? Thanks for the help.

[Whiro]

9 minutes ago, YourBoiConnor said:

We know that the display works fine. How do I reset the CMOS? Thanks for the help.

You can reset the UEFI settings (clear CMOS) by one of the following methods:

 1. Go to the Exit tab in the UEFI and select Load Optimized Defaults.

2. Press the Clear CMOS button on your motherboard (if it has one).

3. Unplug the computer and remove the coin cell battery on the motherboard for a few minutes and then reinsert it.

[YourBoiConnor]

I can't even get into the Bios.

[Whiro]

11 minutes ago, YourBoiConnor said:

I can't even get into the Bios.

So do this

Unplug the computer and remove the coin cell battery on the motherboard for a few minutes and then reinsert it.

[GamerBlake]

6 hours ago, YourBoiConnor said:

I was DDUing my graphics card from a 5700xt to a 1070 ti. I plugged in the new graphics card and now my computer won't display a picture even though the fans are working.

 

specs

CPU: I7-7700k

Motherboard: Asus prime H270M-plus

Videocards: Thicc 2 5700xt and Asus ROG 1070 ti

RAM: Gskill 16gb 2133mhz

Power Supply: Corsair CX600

Have you tried using a different output option? Like if you’re using HDMI try Display Port or if you’re already using DP try HDMI.  

[YourBoiConnor]

1 hour ago, GamerBlake said:

Have you tried using a different output option? Like if you’re using HDMI try Display Port or if you’re already using DP try HDMI.  

Yes, I have tried every output on both GPUs and the integrated graohics on my CPU.

[GamerBlake]

33 minutes ago, YourBoiConnor said:

Yes, I have tried every output on both GPUs and the integrated graohics on my CPU.

Hmm and you said with your other gpu the display is fine?

 

If that’s the case it might be that there’s something wrong with the gpu.

[paddy-stone]

10 hours ago, GamerBlake said:

Hmm and you said with your other gpu the display is fine?

 

If that’s the case it might be that there’s something wrong with the gpu.

No, he's tried both cards and the integrated graphics and nothing is outputting to the display now. Please read the thread to stop people having to repeat what has already been discussed.

[YourBoiConnor]

I know both graphics cards work. I have tested them both on a different system and they work fine

[YourBoiConnor]

22 hours ago, Whiro said:

So do this

Unplug the computer and remove the coin cell battery on the motherboard for a few minutes and then reinsert it.

This worked! Thank you for the help.

[Whiro]

1 minute ago, YourBoiConnor said:

This worked! Thank you for the help.

I’m glad it worked