LED/RGB SW

[Papumodi]

Hi there I recently brought a while computer setup which I've run into two problem first is the RGB led switch is connected to a 2 pin connector which I can't find anywhere to put it on the mother board , I am using Gigabyte GA-78LMT-USB Motherboard  https://amzn.to/2FyTpYJall  with Antec NX210 Case https://amzn.to/3a0TouG which the case seems to be a hell of a problem and a half , does anyone know where I can put this two pin connector to be able to use the RGB button at the front of the case ?

[flashiling]

there should be a manual on the support page, otherwise look for the writing on the motheboard many of the pins are named with white text below or next to it

[Papumodi]

2 minutes ago, flashiling said:

there should be a manual on the support page, otherwise look for the writing on the motheboard many of the pins are named with white text below or next to it

Yah I Need a Led Controller  For this can u suggest me led controller for this 2 pin cable  

[flashiling]

Just now, Papumodi said:

Yah I Need a Led Controller  For this can u suggest me led controller for this 2 pin cable  

never worked with any led controllers so i'm not in a potition to, sorry

[boey]

3 minutes ago, Papumodi said:

Yah I Need a Led Controller  For this can u suggest me led controller for this 2 pin cable  

you have to plug it in to the front panel header, check motherboard manual for the specific pins to attach it to

[paddy-stone]

18 minutes ago, _d0nut said:

you have to plug it in to the front panel header, check motherboard manual for the specific pins to attach it to

Agree, that definitely looks like a front panel connector.

[thrasher_565]

https://antec.com/product/case/nx210.php

 

so some controllers that have a Manuel button for speed,mode,brightness may also alow you to use your reset switch to pick one of thows modes from out side your case and well this case adds another switch so you can now do 2 modes out side the case. only controller that comes to mind is corsair.