CPU Fans go full speed no reason

[Niconsky]

My specs:

MOBO: MSI Z270 Gaming M3

GPU: Gigabyte GTX 1060 windforce OC 3GB

RAM: Corsair Vengeance CMK16GX4M2A2133C13 (2x8)

CPU: i5 7600k 3.8Ghz 6Mb

PSU: Corsair CX750M 750W

Cpu Liquid Heatsink: Corsair Hydro h100i V2 

 

My problem:

The CPU liquid heatsink fans go at full speed after a couple seconds the system has been started and they won't stop running full speed. When this happens the "corsair" led start flashing. If I go into the bios I can press on the DC button to stop them so I think the connection with the mobo Is fine. I've also cleaned from dust and replaced the thermal paste, nothing changed. I've installed and uninstalled multiple times the pc drivers just I can't find online actually working drivers for dissipation. As you can notice from the first photo i attached to this thread the mobo doesn't recognize that in that usb slot there Is the heatsink cable.

[Niconsky]

I don't know how to read this but it does not seem to be fine

[Ben17]

4 minutes ago, Niconsky said:

I don't know how to read this but it does not seem to be fine

 

try pressing all set default 

[Ben17]

is it a usb slot on the motherboard or a addon card

[Niconsky]

Just now, Ben17 said:

try pressing all set default 

Already tried, nothing happened.

 

Also, I think this is an alimentation problem because also the GPU is having problems rendering correctly games

[Niconsky]

1 minute ago, Ben17 said:

is it a usb slot on the motherboard or a addon card

USB slot

[Ben17]

10 minutes ago, Niconsky said:

USB slot

check the cable isn't damaged particularly at the connectors sometimes the wire cam come slightly loose causing issues

[Ben17]

not sure why the pump reads as 0 rpm even though you have it plugged in

[Niconsky]

2 minutes ago, Ben17 said:

check the cable isn't damaged particularly at the connectors sometimes the wire cam come slightly loose causing issues

Seems fine

[Ben17]

Just now, Niconsky said:

Seems fine

yeah it does just thought id check that as i had a nzxt smart device with my case have very interment issues because of bad connnecter 

[Niconsky]

Ok I changed also to another USB connector the same thing happens @Ben17 really I don't know what it could be

[Ben17]

5 minutes ago, Niconsky said:

Ok I changed also to another USB connector the same thing happens @Ben17 really I don't know what it could be

check the other tabs in the bios just in case there is some usb sleep option or something 

[Ben17]

same im not 100% sure either 

[Ben17]

check the plug that goes into the actual pump (the part that screws on the cpu) is in properly  

[Niconsky]

10 minutes ago, Ben17 said:

check the other tabs in the bios just in case there is some usb sleep option or something

Checked, nothing found.

[Ben17]

3 minutes ago, Niconsky said:

Checked, nothing found.

is the connection at the actual pump in right 

[Niconsky]

8 minutes ago, Ben17 said:

check the plug that goes into the actual pump (the part that screws on the cpu) is in properly  

Checked, it was properly inserted. You meant the one that one end is in the CPU part of the heatsink and the other in the USB port right?

[Ben17]

not sure why i didn't get a notification for your message lol

[Ben17]

1 minute ago, Niconsky said:

Checked, it was properly inserted. You meant the one that one end is in the CPU part of the heatsink and the other in the USB port right?

yes 

[Niconsky]

1 minute ago, Ben17 said:

not sure why i didn't get a notification for your message lol

@Ben17 now should work the notification btw thanks for helping me

[Ben17]

tbh i'm not sure at this point (don't have a aio cooler personally) have a nh d15 

[Ben17]

no problem  

[Niconsky]

Ok, then i think i'm going to wait someone else or maybe i'll bring the pc to a computer repair shop. If i have any update i will post in this thread.