Jump to content

XMP enabled but ram still running at 2133Mhz

Dat_Boi_Earl
 Share
Posted

I just put together my new pc and i cant get my 3200Mhz ram to achieve the speeds advertised in dual channel with XMP enabled. They run at 3200Mhz in single channel but when i put them in dual channel they go back to stock DDR4 speeds of 2133Mhz. I have tried a manual overclock, but i dont know enough about timings and adjusting voltage to do anything confidently. Any help would be appreciated.

 

SPECS:

CPU: Ryzen 7 3700x @stock

RAM: G.Skill Trident Z RBG 16G (2x8) DDR4 3200 CL16 

MOBO: Gigabyte x570 Aorus Elite

GPU: Radeon 5700XT

PSU: EVGA G3 650W

STORAGE: Samsung 970 Pro 512G M.2 SSD, Seagate Barracura Pro 3TB HDD @7200RPM

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

try setting it manually to 1.35v then..they were tested on with that voltage to reach 3200mhz cl16 anyway..=x..and i'm pretty sure 3700x and x570 aorus elite can do the speed...

and you can also check if there's newer bios that updated the ram compatibility... 

 

image.thumb.png.1c7901db73d9ff1dbee9c900bc0000f4.png

 

  • CPU
    AMD Ryzen™ 7 3700X 4.3Ghz (-0.1V)
  • Motherboard
    MSI MEG X570 ACE
  • RAM
    G.SKILL Trident Z Royal Series 32GB (2 x 16GB) F4-3200C16D-32GTRS
  • GPU
    GeForce RTX™ 3060 EAGLE OC 12G (rev. 2.0)
  • Case
    Cooler Master MASTERBOX MB520 ARGB + Cooler Master MasterFan MF120R ARGB
  • Storage
    ADATA XPG SX8100 2TB PCIe Gen3x4 M.2 2280 SSD
    ADATA Ultimate SU800 2TB 2.5" SSD
    Toshiba X300 4TB 7200 RPM 128MB Cache
    TOSHIBA MG06 (MG06ACA10TE) 10TB 3.5 Inch 7200RPM Enterprise SATA Hard Drive
  • PSU
    Cooler Master MWE GOLD 750 FULL MODULAR
  • Display(s)
    Acer KG271B Gaming Monitor (HDR Ready 27" 1920X1080 240Hz) + MSI PRO MP241
  • Cooling
    Cooler Master MASTERLIQUID ML240R RGB
  • Keyboard
    MSI Vigor GK80 RED GAMING KEYBOARD
  • Mouse
    Razer Naga Hex Wraith Red Edition Wired Laser Mouse
  • Operating System
    Windows 10 Home
  • Router
    Asus ROG Rapture GT-AX 11000
Link to comment
Share on other sites
Link to post
Share on other sites
Posted
6 minutes ago, Dat_Boi_Earl said:

they go back to stock DDR4 speeds of 2133Mhz.

reenable XMP then, if it doesn't apply clear CMOS and do that again. If it still doesn't work, manually raise frequency to 3200

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×