Jump to content

Cooling solution for GTX 1060 6GB

Fredrik Svantesson
 Share
Posted

With my current OC I need a very aggressive fancurve to maintain comfortable temperatures, which causes a very audible thunderstorm from my computer.

 

To fix this noise issue, I've been thinking about watercooling it. However I haven't found any great solution yet, since no waterblocks seem to be made for it.

 

Are there any waterblocks for the 1070 series or likewise that could fit (with some minor adjustments?).  How much work is it to buy one of those universal GPU blocks for the chip itself and passive sinks for the other components?

 

I don't want to spend too much and I'm pretty handy (have soldering station at hand).

 

Also I really, really don't want to compromise on my OC here, since I gain quite a lot from it. We're talking 20-40 FPS depending on game and settings, and it really gives me much since it actually pushes a lot of games near or over the 144hz limit of my freesync monitor. If I can't make it quieter with the same OC settings, I will just have to live with the damn noise.

 

The card in question is an ASUS 1060 6GB DUAL OC

 

Thanks in advance!

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Redo the thermal paste or check case airflow. My 1070 Dual has the same cooler and it tops at 80C when maxed out with a higher power limit bios

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
3 minutes ago, Jurrunio said:

Redo the thermal paste or check case airflow. My 1070 Dual has the same cooler and it tops at 80C when maxed out with a higher power limit bios

Thanks! What level of improvement can one expect from redoing thermal paste?

 

I have core voltage +50, power limit 116%,  core around 2050mhz (+100) and memory 4800mhz (+800). And then I've set the fancurve to basically maintain max 65C, which it does.

 

I don't think  my case airflow is bad, but maybe it could be improved. It's a define C case with the default setup of stock fans though.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Oh you want 65C? Then it may not help very much. My temperature is obtained at 200w card power draw and max fan speed

 

Stock fan of Define C is quite weak in airflow tho

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
9 minutes ago, Jurrunio said:

Oh you want 65C? Then it may not help very much. My temperature is obtained at 200w card power draw and max fan speed

 

Stock fan of Define C is quite weak in airflow tho

If it goes above 65C, the OC starts to throttle (and not able to maintain 2050mhz anymore). Max. fan speed is the problem here though lol, since it's whats makes the noise.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
14 minutes ago, Fredrik Svantesson said:

If it goes above 65C, the OC starts to throttle (and not able to maintain 2050mhz anymore). Max. fan speed is the problem here though lol, since it's whats makes the noise.

It is normal for the clock to drop as it gets hot. Maybe cooler swap then unlesd you dobt mind the noise

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
2 minutes ago, Jurrunio said:

It is normal for the clock to drop as it gets hot. Maybe cooler swap then unlesd you dobt mind the noise

Yes... hence why I'm considering watercooling or some other cooling solution.. :)

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
58 minutes ago, Fredrik Svantesson said:

Yes... hence why I'm considering watercooling or some other cooling solution.. :)

Arctic accelero xtreme or Raijintek Morpheus?

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Watercooling a 1060 will cost you at least $150 - 200, at which point you're way better off selling it and buying a 1660 ti or better with the money, and get way better results at the end of the day 

Want to custom loop?  Ask me more if you are curious

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
5 hours ago, Damascus said:

Watercooling a 1060 will cost you at least $150 - 200, at which point you're way better off selling it and buying a 1660 ti or better with the money, and get way better results at the end of the day 

Hmm I'm afraid you're correct. Either that or something extremely custom and clever.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

What's your current fan setup? Maybe share a picture. 

 

How much of a difference does ramping up the case fans make? 

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Custom Loop and Exotic Cooling

×