Jump to content

Cheap but good 3D printer?

TheNaitsyrk
By TheNaitsyrk
in Hobby Electronics
 Share
Posted

Been 3D modelling for a while now, and I am just wondering if anyone could recommend a cheap but decent 3D printer in the UK?

Main PC:

CPU: Intel Core i9 14900KS SP 109 (125P-79E) (6.1Ghz P-Cores 4.8Ghz E-cores) MC SP 88

CPU Voltage: LLC6 1.43V

Cooled by: Supercool Direct Die 14th gen full nickel

Motherboard: Z790 ASUS Maximus Apex Encore

RAM: GSkill TridentZ 2x24GB DDR5 8800Mhz Watercooled

GPU: RTX 5090 Palit OC with Alphacool Core Waterblock

Case: TT P3

Storage: 4x 2TB Sarbent Rocket Plus Gen 4.0 NVMe, 1x External 2TB Seagate Barracuda (Backup)

PSU: Corsair AX1600i with custom black and red cables with 2x Corsair 5V+ Load Balancer

Display: Samsung Oddysey G9 57" 240Hz Ver. 7680x2160 and

2x ASUS XG17AHP 240hz 17"

Fan Controllers:  6x AquaComputer Octo

Cooling: Three Custom Loops:

1st Loop: 5x 480mm XE CoolStream radiators with 1x Revo D5 RGB pump and 1x Rajintek Antila D5 Evo RGB pump for GPU only cooling with 2x Koolance QDC3, red coolant

2nd Loop: 5x 480mm XE CoolStream radiators with 1x Revo D5 RGB pump and 1x Rajintek Antila D5 Evo RGB pump for CPU only cooling with 2x Koolance QDC3, purple coolant

3x 360mm PE EKWB CoolStream 

3rd Loop: 1x 240mm PXE CoolStream radiator with 1x EKWB Revo D5 pump (RAM ONLY) - Back of the case

 

2nd Main PC is same as above, except Display is Philips Evnia 49" 5120x1440 240hz QD-OLED, 48GB 8400Mhz RAM, 8TB NVMe

 

1st Laptop: MSI Titan HX18 Dragon Edition, RTX 5090 175W, Core Ultra 285HX,  128GB of RAM @5600Mhz / 96GB @6400Mhz

8TB of NVMe - GPU and CPU with LM on, Llano V12

2nd Laptop: MSI Raider 18HX, RTX 5090 175W, 9955HX3D, 128GB DDR5 @5600Mhz, 8TB NVMe, CPU and GPU LM on, Llano V12

3rd Laptop: MSI Titan 18HX, RTX 4090 175W, 14900HX, 224GB DDR5 @3600Mhz, 8TB NVMe

 

HTPC: 

CPU: Intel Core i9 14900K (SP99 P111 E76), CPU Voltage: 1.33V, Cooled by: Supercool Direct Die 12th gen full nickel, Motherboard: Z790 Apex

RAM: GSkill TridentZ 2x24GB DDR5 8000Mhz CL40, GPU: RTX 5090 Palit Gamerock with Alphacool Waterblock,  Case: Corsair 6500D, Storage: 3x2TB PM9A1 Samsung NVMe Gen 4

WiFi: Wifi 6E Built in, PSU: AX1600i Corsair Titanium, Display: Philips Evnia 49" 240Hz OLED, Fan Controllers:  1x DH-10 DeepCool and Deepcool RGB hub, Loop: 2x 360mm XE CoolStream radiator, 1x 360mm PE Coolstream Radiator, 1x 240mm XE CoolStream Radiator, Revo D5 EKWB Pump, 19x Corsair 120ML RED LED fans 2000RPM

Link to comment
https://linustechtips.com/topic/1083172-cheap-but-good-3d-printer/
Share on other sites
Link to post
Share on other sites
Posted

Depends on what you mean by cheap. The up Mini is "cheap" compared to their other models, and it totally kicks ass

I WILL find your ITX build thread, and I WILL recommend the SIlverstone Sugo SG13B

 

Primary PC:

i7 8086k - EVGA Z370 Classified K - G.Skill Trident Z RGB - WD SN750 - Jedi Order Titan Xp - Hyper 212 Black (with RGB Riing flair) - EVGA G3 650W - dual booting Windows 11 and Fedora Linux - Black and green theme, Razer brainwashed me.

Draws 400 watts under max load, for reference.

 

PSU tier list

How many watts do I need?

PSU misconceptions, protections explained, group reg is bad

Link to post
Share on other sites
Posted
  • Author
1 hour ago, James Evens said:

Ender 3D

Anet a8

Davinci nano when it is on sale

monoprice select mini 2

 

at the pricepoint everything which works can be consider good so don't expect the best 3d printer just a working one which need some upgrades

I heard Ender 3D is pretty good.

Main PC:

CPU: Intel Core i9 14900KS SP 109 (125P-79E) (6.1Ghz P-Cores 4.8Ghz E-cores) MC SP 88

CPU Voltage: LLC6 1.43V

Cooled by: Supercool Direct Die 14th gen full nickel

Motherboard: Z790 ASUS Maximus Apex Encore

RAM: GSkill TridentZ 2x24GB DDR5 8800Mhz Watercooled

GPU: RTX 5090 Palit OC with Alphacool Core Waterblock

Case: TT P3

Storage: 4x 2TB Sarbent Rocket Plus Gen 4.0 NVMe, 1x External 2TB Seagate Barracuda (Backup)

PSU: Corsair AX1600i with custom black and red cables with 2x Corsair 5V+ Load Balancer

Display: Samsung Oddysey G9 57" 240Hz Ver. 7680x2160 and

2x ASUS XG17AHP 240hz 17"

Fan Controllers:  6x AquaComputer Octo

Cooling: Three Custom Loops:

1st Loop: 5x 480mm XE CoolStream radiators with 1x Revo D5 RGB pump and 1x Rajintek Antila D5 Evo RGB pump for GPU only cooling with 2x Koolance QDC3, red coolant

2nd Loop: 5x 480mm XE CoolStream radiators with 1x Revo D5 RGB pump and 1x Rajintek Antila D5 Evo RGB pump for CPU only cooling with 2x Koolance QDC3, purple coolant

3x 360mm PE EKWB CoolStream 

3rd Loop: 1x 240mm PXE CoolStream radiator with 1x EKWB Revo D5 pump (RAM ONLY) - Back of the case

 

2nd Main PC is same as above, except Display is Philips Evnia 49" 5120x1440 240hz QD-OLED, 48GB 8400Mhz RAM, 8TB NVMe

 

1st Laptop: MSI Titan HX18 Dragon Edition, RTX 5090 175W, Core Ultra 285HX,  128GB of RAM @5600Mhz / 96GB @6400Mhz

8TB of NVMe - GPU and CPU with LM on, Llano V12

2nd Laptop: MSI Raider 18HX, RTX 5090 175W, 9955HX3D, 128GB DDR5 @5600Mhz, 8TB NVMe, CPU and GPU LM on, Llano V12

3rd Laptop: MSI Titan 18HX, RTX 4090 175W, 14900HX, 224GB DDR5 @3600Mhz, 8TB NVMe

 

HTPC: 

CPU: Intel Core i9 14900K (SP99 P111 E76), CPU Voltage: 1.33V, Cooled by: Supercool Direct Die 12th gen full nickel, Motherboard: Z790 Apex

RAM: GSkill TridentZ 2x24GB DDR5 8000Mhz CL40, GPU: RTX 5090 Palit Gamerock with Alphacool Waterblock,  Case: Corsair 6500D, Storage: 3x2TB PM9A1 Samsung NVMe Gen 4

WiFi: Wifi 6E Built in, PSU: AX1600i Corsair Titanium, Display: Philips Evnia 49" 240Hz OLED, Fan Controllers:  1x DH-10 DeepCool and Deepcool RGB hub, Loop: 2x 360mm XE CoolStream radiator, 1x 360mm PE Coolstream Radiator, 1x 240mm XE CoolStream Radiator, Revo D5 EKWB Pump, 19x Corsair 120ML RED LED fans 2000RPM

Link to post
Share on other sites
Posted
1 hour ago, TheNaitsyrk said:

Been 3D modelling for a while now, and I am just wondering if anyone could recommend a cheap but decent 3D printer in the UK?

https://www.banggood.com/TEVO-Tarantula-Pro-3D-Printer-Kit-with-235x235x250mm-Printing-Size-MKS-GenL-Mainboard-0_4mm-Volcano-Nozzle-Support-1_75mm-Filament-p-1470655.html?rmmds=search&cur_warehouse=USA

this one is also a good solution

or also this one

https://www.banggood.com/Tevo-Tarantula-Prusa-I3-DIY-3D-Printer-Kit-With-Auto-Leveling-Sensor-200x280x200mm-Large-Printing-Si-p-1175940.html?rmmds=search&cur_warehouse=USA

also a little review of the last one i mentioned

 

Link to post
Share on other sites
Posted
  • Author
7 hours ago, airdeano said:

what cha wanna print?

big stuff? small stuff? useful stuff? trinkets and doodads?

any filament preferences? how detailed and small are your needs?

Never printed before so you guess. Just anything atm.

Main PC:

CPU: Intel Core i9 14900KS SP 109 (125P-79E) (6.1Ghz P-Cores 4.8Ghz E-cores) MC SP 88

CPU Voltage: LLC6 1.43V

Cooled by: Supercool Direct Die 14th gen full nickel

Motherboard: Z790 ASUS Maximus Apex Encore

RAM: GSkill TridentZ 2x24GB DDR5 8800Mhz Watercooled

GPU: RTX 5090 Palit OC with Alphacool Core Waterblock

Case: TT P3

Storage: 4x 2TB Sarbent Rocket Plus Gen 4.0 NVMe, 1x External 2TB Seagate Barracuda (Backup)

PSU: Corsair AX1600i with custom black and red cables with 2x Corsair 5V+ Load Balancer

Display: Samsung Oddysey G9 57" 240Hz Ver. 7680x2160 and

2x ASUS XG17AHP 240hz 17"

Fan Controllers:  6x AquaComputer Octo

Cooling: Three Custom Loops:

1st Loop: 5x 480mm XE CoolStream radiators with 1x Revo D5 RGB pump and 1x Rajintek Antila D5 Evo RGB pump for GPU only cooling with 2x Koolance QDC3, red coolant

2nd Loop: 5x 480mm XE CoolStream radiators with 1x Revo D5 RGB pump and 1x Rajintek Antila D5 Evo RGB pump for CPU only cooling with 2x Koolance QDC3, purple coolant

3x 360mm PE EKWB CoolStream 

3rd Loop: 1x 240mm PXE CoolStream radiator with 1x EKWB Revo D5 pump (RAM ONLY) - Back of the case

 

2nd Main PC is same as above, except Display is Philips Evnia 49" 5120x1440 240hz QD-OLED, 48GB 8400Mhz RAM, 8TB NVMe

 

1st Laptop: MSI Titan HX18 Dragon Edition, RTX 5090 175W, Core Ultra 285HX,  128GB of RAM @5600Mhz / 96GB @6400Mhz

8TB of NVMe - GPU and CPU with LM on, Llano V12

2nd Laptop: MSI Raider 18HX, RTX 5090 175W, 9955HX3D, 128GB DDR5 @5600Mhz, 8TB NVMe, CPU and GPU LM on, Llano V12

3rd Laptop: MSI Titan 18HX, RTX 4090 175W, 14900HX, 224GB DDR5 @3600Mhz, 8TB NVMe

 

HTPC: 

CPU: Intel Core i9 14900K (SP99 P111 E76), CPU Voltage: 1.33V, Cooled by: Supercool Direct Die 12th gen full nickel, Motherboard: Z790 Apex

RAM: GSkill TridentZ 2x24GB DDR5 8000Mhz CL40, GPU: RTX 5090 Palit Gamerock with Alphacool Waterblock,  Case: Corsair 6500D, Storage: 3x2TB PM9A1 Samsung NVMe Gen 4

WiFi: Wifi 6E Built in, PSU: AX1600i Corsair Titanium, Display: Philips Evnia 49" 240Hz OLED, Fan Controllers:  1x DH-10 DeepCool and Deepcool RGB hub, Loop: 2x 360mm XE CoolStream radiator, 1x 360mm PE Coolstream Radiator, 1x 240mm XE CoolStream Radiator, Revo D5 EKWB Pump, 19x Corsair 120ML RED LED fans 2000RPM

Link to post
Share on other sites
Posted

Probably an Ender 3, CR10, Prusa if you're willing to spend more. I have a CR10S and it's printing great. Keep in mind that the cheaper you go, the more you'll have to tinker with it to dial it in properly, but that's part of the fun.

Crystal: CPU: i7 7700K | Motherboard: Asus ROG Strix Z270F | RAM: GSkill 16 GB@3200MHz | GPU: Nvidia GTX 1080 Ti FE | Case: Corsair Crystal 570X (black) | PSU: EVGA Supernova G2 1000W | Monitor: Asus VG248QE 24"

Laptop: Dell XPS 13 9370 | CPU: i5 10510U | RAM: 16 GB

Server: CPU: i5 4690k | RAM: 16 GB | Case: Corsair Graphite 760T White | Storage: 19 TB

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Hobby Electronics

×