HELP! I screwed up!

[Koxicain]

I screwed up badly... 

 

I purchased a Sharkoon TG5 which has the Dimensions (L x W x H): 45.2 x 22.0 x 46.5 cm

and only supports ATX boards. I already know im going to purchase one of the toptier boards from MSI, Asus or Gigabyte which are E-ATX which i kinda overlooked.

I had a custom flightcase build for those specific dimensions so there for im now looking for a replacement case that will work with my flightcase. 
It has to be the exact same dimensions, in theory i is allowed to be abit taller since i can cut out some of the foam at the bottom or if the feet can be taken off the case to fit.

 

I have tried searching everywhere for a replacement case but i havnt been able to find anything. 
Case also needs to fit a 360mm Radiator or a good custom loop.

 

Hope you guys can help.

[Sat1600]

How exact? I don't know much about flight cases.

 

Would this work?

 

Phanteks PH-EC416PSTG_BK Eclipse P400S Silent Edition with Tempered Glass, Satin Black Cases https://www.amazon.com/dp/B01N5HIDXB/ref=cm_sw_r_cp_apa_i_gHPgDb3DMC8AM

 

210mm x 465mm x 470mm (W x H x D)

[Sat1600]

Or this:

 

https://www.newegg.com/black-gamdias-talos-m1-atx-mid-tower/p/N82E16811356002

 

Dimensions are in inches on newegg but the manufacturer's webpage says

448 x 210 x 466 mm LxWxD

 

https://www.gamdias.com/component/index.php/home-7/talos-m1

[Ravendarat]

Just do the ACE board man, unless you really need the godlike, but based on your other thread the ACE board would work great and then you don’t have to scramble for everything else

[Koxicain]

2 hours ago, Sat1600 said:

How exact? I don't know much about flight cases.

 

Would this work?

 

Phanteks PH-EC416PSTG_BK Eclipse P400S Silent Edition with Tempered Glass, Satin Black Cases https://www.amazon.com/dp/B01N5HIDXB/ref=cm_sw_r_cp_apa_i_gHPgDb3DMC8AM

 

210mm x 465mm x 470mm (W x H x D)

This might work if i take abit off the bottom and side. 
A flight case is made to fit 100% so it will not wiggle inside.
So were talkin 5mm could be enough to not make it work

 

1 hour ago, Sat1600 said:

Or this:

 

https://www.newegg.com/black-gamdias-talos-m1-atx-mid-tower/p/N82E16811356002

 

Dimensions are in inches on newegg but the manufacturer's webpage says

448 x 210 x 466 mm LxWxD

 

https://www.gamdias.com/component/index.php/home-7/talos-m1

I wish but doesnt support E-ATX unfortunately

 

1 hour ago, Ravendarat said:

Just do the ACE board man, unless you really need the godlike, but based on your other thread the ACE board would work great and then you don’t have to scramble for everything else

Kinda wanna go either Aorus Xtreme or Godlike if i find a suitable case if not i might have to settle for ACE or Aorus Master

[Ravendarat]

Just for my own curiosity what would make you buy Godlike over Ace?

[Koxicain]

Just now, Ravendarat said:

Just for my own curiosity what would make you buy Godlike over Ace?

Aesthetics  and the bundle

[Ravendarat]

Fair enough, I do like the look better compared to the Ace, I’m just not gonna scrap my whole build to start over just to fit e-atx

[Koxicain]

4 minutes ago, Ravendarat said:

Fair enough, I do like the look better compared to the Ace, I’m just not gonna scrap my whole build to start over just to fit e-atx

Well its not my whole build. 
I can build a seconday pc with the other case here and the 2700x. 
Already got everything needed for a full system exept case once i buy Mobo and CPU

[Sat1600]

13 minutes ago, Koxicain said:

I wish but doesnt support E-ATX unfortunately

That's weird. The newegg page says E-ATX. But I see that the manufacturer's page says ATX 

[Sat1600]

This one is also 7mm too tall. Seems like nothing. I don't know if ANY 2 cases have the same exact dimensions. 

 

https://www.newegg.com/p/N82E16811112587

[Koxicain]

6 hours ago, Sat1600 said:

This one is also 7mm too tall. Seems like nothing. I don't know if ANY 2 cases have the same exact dimensions. 

 

https://www.newegg.com/p/N82E16811112587

If not mistaken thats with the feet on. 

7mm i can work with im hight, i can cut out some of the foam in the corners for this to work No problem. 

But I actually throught i had seen this case and it was too big. But might have been a similar one

[Sat1600]

1 hour ago, Koxicain said:

If not mistaken thats with the feet on. 

7mm i can work with im hight, i can cut out some of the foam in the corners for this to work No problem. 

But I actually throught i had seen this case and it was too big. But might have been a similar one

According to the manufacturer web page: (W)220mm x(H)472mm x(D)450mm

 

http://www.lian-li.com/lancool-one/

[Koxicain]

35 minutes ago, Sat1600 said:

According to the manufacturer web page: (W)220mm x(H)472mm x(D)450mm

 

http://www.lian-li.com/lancool-one/

Yeah this could definately work. 7mm i can easily remove from each corner of my flightcase.
Thanks a lot man! This seems to be a really good case and its even cheap.
Good cable management routes aswell.