Easy Way to Chill your pc

[Be Healed in Jesus Name!]

So I am running 3 rads, one 360 and 2 x 240's . I have one outside of my case. This is running a Ryzen 7 1700 and Gtx 1070.

Now I mounted one of the rads on my wall A/C so that ice cold A/C air is pushing straight through it, with no fans, just rad

Getting really good temps . 

This can be done with one rad and will work probably just as good. Maybe not as low of temps 

 

19c on the whole loop and 15c on the Gpu... Its a single loop, CPU and GPU together 

these are idle temps obviously but still pretty good and they stay pretty cool while gaming also  

[Raudi_]

2 minutes ago, Be Healed in Jesus Name! said:

So I am running 3 rads, one 360 and 2 x 240's . I have one outside of my case. This is running a Ryzen 7 1700 and Gtx 1070.

Now I mounted one of the rads on my wall A/C so that ice cold A/C air is pushing straight through it, with no fans, just rad

Getting really good temps . 

This can be done with one rad and will work probably just as good. Maybe not as low of temps 

 

19c on the whole loop and 15c on the Gpu... Its a single loop, CPU and GPU together 

these are idle temps obviously but still pretty good and they stay pretty cool while gaming also  

-snip-

Be mindful of Condensation and humidity as that can/will be a hardware killer with temps lower than ambient.

[Be Healed in Jesus Name!]

1 minute ago, KingCry said:

Be mindful of Condensation and humidity as that can/will be a hardware killer with temps lower than ambient.

yes ... these temps are what i get when i leave it alone, it stays in the 20's ... my A/C has a fan setting, which i switch it to if i am not using it or not gaming 

[Raudi_]

1 minute ago, Be Healed in Jesus Name! said:

yes ... these temps are what i get when i leave it alone, it stays in the 20's ... my A/C has a fan setting, which i switch it to if i am not using it or not gaming 

Like I said you need to worry about condensation so you don't kill your hardware. while the temps your system is reporting is nice a low if your loop temp is dropping below ambient you will run into possible issues with condensation. 

[Be Healed in Jesus Name!]

this is idle with my A/C in fan mode

[Be Healed in Jesus Name!]

3 minutes ago, KingCry said:

Like I said you need to worry about condensation so you don't kill your hardware. while the temps your system is reporting is nice a low if your loop temp is dropping below ambient you will run into possible issues with condensation. 

agreed... these temps only stay that low when the pc in not being used .... when you game it goes up to 40' and 50's , but i did notice and slight performance increase 

[knightslugger]

odd. with that much cooling available (360 + effectively, a 480) your GPU temps should remain below Boost 3.0 throttling temps with 21C ambient. the 1070 should be getting one HELL of a lot higher boost than 1683MHz, even on a shitty AIO bracket. i mean on my 1080ti FE on a water block (2050MHz) with a 1700x (4.0GHz) all cooled with a 360 + 240, my GPU temps stay below 60C in a Lian Li PC-011.

[Be Healed in Jesus Name!]

18 minutes ago, knightslugger said:

odd. with that much cooling available (360 + effectively, a 480) your GPU temps should remain below Boost 3.0 throttling temps with 21C ambient. the 1070 should be getting one HELL of a lot higher boost than 1683MHz, even on a shitty AIO bracket. i mean on my 1080ti FE on a water block (2050MHz) with a 1700x (4.0GHz) all cooled with a 360 + 240, my GPU temps stay below 60C in a Lian Li PC-011.

my cpu is 3.95 ... ive tried getting to 4.0 but was not able to get it stable ... the gpu is overclocked +410 on the memory clock +210 on the core, it stays low until it needs to be used and then it ramps up ... GPU clock 1822mhz and  Memory clock 4414Mhz this pic is gpu in fan mode on my A/C 46c max 

[Be Healed in Jesus Name!]

question, why is my cpu only hitting 3.91 if the base is clocked to 3.95? are there any cpu settings i could change to get it 4.0 stable ? i got in to windows at 4.1mhz but it would not cinebench or stress test.. temps are not a concern... literally just pushing the cpu

[knightslugger]

23 minutes ago, Be Healed in Jesus Name! said:

question, why is my cpu only hitting 3.91 if the base is clocked to 3.95? are there any cpu settings i could change to get it 4.0 stable ? i got in to windows at 4.1mhz but it would not cinebench or stress test.. temps are not a concern... literally just pushing the cpu

I donno, it's your overclock... I have mine running at 1.38V core, 1.1V on SOC with 140% on the max VRM current for both. but that's my chip, my board, and all that nonsense. YMMV.

 

I am surprised by the 1822MHz on the 1070. If memory serves i was 2100MHz on my FTW with just a Corsair H115i on the die (via kracken G12 bracket). that could be the difference between 122% power and 112%. I also cranked core voltage because it doesn't really do much but figured what the hell, couldn't hurt.

[aezakmi]

This sounds like literally the least efficient cooling system in the world.

 

 

 

I like it.

[Ttnuagmada]

5 hours ago, knightslugger said:

odd. with that much cooling available (360 + effectively, a 480) your GPU temps should remain below Boost 3.0 throttling temps with 21C ambient. the 1070 should be getting one HELL of a lot higher boost than 1683MHz, even on a shitty AIO bracket. i mean on my 1080ti FE on a water block (2050MHz) with a 1700x (4.0GHz) all cooled with a 360 + 240, my GPU temps stay below 60C in a Lian Li PC-011.

 

You may want to look into that. Your max GPU temp should be in the 30-40C range with that setup.   

[kidroc666]

windows and other programs report the blck wrong and or the broad itself down clocks itself by .25 or so no worries..

[Be Healed in Jesus Name!]

ok..