Jump to content

Refilling nzxt x62

Go to solution Solved by Firewrath9,

run it straight for 24-48 hours, should get rid of the noises.

Hi, so the question. So I just installed my nzxt x62 280mm. It was my first aio and honestly the installation was a pain. I turned the pc on and then I heard sounds of "running" water. Inside the aio. No leaks 100% sure. I checked. Anyone had the same problem? Do I need to refill it? If so, how? Distilled water? Shouldn't it be full out of stock? I don't think refund or return is a good idea, it's not broken just not full. (Lots of questions but if you decide to help me, thank u kindly. I really appreciate)

Link to comment
Share on other sites

Link to post
Share on other sites

The NZXT X62, line most of the AIO's out in the market, are CLOSED Loop liquid coolers.

They are not self-serviceable (e.g. you cannot take them apart and re-fill them).

 

It is normal to hear the sound of "running water" -- experienced the same thing with my NZXT X61.

As @Firewrath9 mentioned, it should go away after a while.

Intel Z390 Rig ( *NEW* Primary )

Intel X99 Rig (Officially Decommissioned, Dead CPU returned to Intel)

  • i7-8086K @ 5.1 GHz
  • Gigabyte Z390 Aorus Master
  • Sapphire NITRO+ RX 6800 XT S.E + EKwb Quantum Vector Full Cover Waterblock
  • 32GB G.Skill TridentZ DDR4-3000 CL14 @ DDR-3400 custom CL15 timings
  • SanDisk 480 GB SSD + 1TB Samsung 860 EVO +  500GB Samsung 980 + 1TB WD SN750
  • EVGA SuperNOVA 850W P2 + Red/White CableMod Cables
  • Lian-Li O11 Dynamic EVO XL
  • Ekwb Custom loop + 2x EKwb Quantum Surface P360M Radiators
  • Logitech G502 Proteus Spectrum + Corsair K70 (Red LED, anodized black, Cheery MX Browns)

AMD Ryzen Rig

  • AMD R7-5800X
  • Gigabyte B550 Aorus Pro AC
  • 32GB (16GB X 2) Crucial Ballistix RGB DDR4-3600
  • Gigabyte Vision RTX 3060 Ti OC
  • EKwb D-RGB 360mm AIO
  • Intel 660p NVMe 1TB + Crucial MX500 1TB + WD Black 1TB HDD
  • EVGA P2 850W + White CableMod cables
  • Lian-Li LanCool II Mesh - White

Intel Z97 Rig (Decomissioned)

  • Intel i5-4690K 4.8 GHz
  • ASUS ROG Maximus VII Hero Z97
  • Sapphire Vapor-X HD 7950 EVGA GTX 1070 SC Black Edition ACX 3.0
  • 20 GB (8GB X 2 + 4GB X 1) Corsair Vengeance DDR3 1600 MHz
  • Corsair A50 air cooler  NZXT X61
  • Crucial MX500 1TB SSD + SanDisk Ultra II 240GB SSD + WD Caviar Black 1TB HDD + Kingston V300 120GB SSD [non-gimped version]
  • Antec New TruePower 550W EVGA G2 650W + White CableMod cables
  • Cooler Master HAF 912 White NZXT S340 Elite w/ white LED stips

AMD 990FX Rig (Decommissioned)

  • FX-8350 @ 4.8 / 4.9 GHz (given up on the 5.0 / 5.1 GHz attempt)
  • ASUS ROG Crosshair V Formula 990FX
  • 12 GB (4 GB X 3) G.Skill RipJawsX DDR3 @ 1866 MHz
  • Sapphire Vapor-X HD 7970 + Sapphire Dual-X HD 7970 in Crossfire  Sapphire NITRO R9-Fury in Crossfire *NONE*
  • Thermaltake Frio w/ Cooler Master JetFlo's in push-pull
  • Samsung 850 EVO 500GB SSD + Kingston V300 120GB SSD + WD Caviar Black 1TB HDD
  • Corsair TX850 (ver.1)
  • Cooler Master HAF 932

 

<> Electrical Engineer , B.Eng <>

<> Electronics & Computer Engineering Technologist (Diploma + Advanced Diploma) <>

<> Electronics Engineering Technician for the Canadian Department of National Defence <>

Link to comment
Share on other sites

Link to post
Share on other sites

5 hours ago, -rascal- said:

The NZXT X62, line most of the AIO's out in the market, are CLOSED Loop liquid coolers.

They are not self-serviceable (e.g. you cannot take them apart and re-fill them).

 

It is normal to hear the sound of "running water" -- experienced the same thing with my NZXT X61.

As @Firewrath9 mentioned, it should go away after a while.

I will, thank you guys for help

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×