Jump to content

So Im planning to build a new pc. It will atleast consist out of a RTX 2080, i7-8700k and 2x8gb 2400 mhz. 

I was looking at the Asus Z390 motherboard for this pc, but I could not understand the differences between the multipile version there are of this board. Could someone simply (I do not have a very good understanding of motherboard features) explain to me  what the difference is between these boards? Thanks in advance.

Link to comment
https://linustechtips.com/topic/1042142-difference-between-asus-rog-strix-z390-eih/
Share on other sites

Link to post
Share on other sites

All of them are extremely overpriced for what they are, you're paying an over-tax just for the 'right' of using the ROG branding.

 

If you really want a good Z390 board go for the Aorus line up, better VRM solution, better power phases, better BIOS, memory support, cooling, etc etc... 

 

I'd go more in depth but busy at work~

Personal Desktop":

CPU: Intel Core i7 10700K @5ghz |~| Cooling: bq! Dark Rock Pro 4 |~| MOBO: Gigabyte Z490UD ATX|~| RAM: 16gb DDR4 3333mhzCL16 G.Skill Trident Z |~| GPU: RX 6900XT Sapphire Nitro+ |~| PSU: Corsair TX650M 80Plus Gold |~| Boot:  SSD WD Green M.2 2280 240GB |~| Storage: 1x3TB HDD 7200rpm Seagate Barracuda + SanDisk Ultra 3D 1TB |~| Case: Fractal Design Meshify C Mini |~| Display: Toshiba UL7A 4K/60hz |~| OS: Windows 10 Pro.

Luna, the temporary Desktop:

CPU: AMD R9 7950XT  |~| Cooling: bq! Dark Rock 4 Pro |~| MOBO: Gigabyte Aorus Master |~| RAM: 32G Kingston HyperX |~| GPU: AMD Radeon RX 7900XTX (Reference) |~| PSU: Corsair HX1000 80+ Platinum |~| Windows Boot Drive: 2x 512GB (1TB total) Plextor SATA SSD (RAID0 volume) |~| Linux Boot Drive: 500GB Kingston A2000 |~| Storage: 4TB WD Black HDD |~| Case: Cooler Master Silencio S600 |~| Display 1 (leftmost): Eizo (unknown model) 1920x1080 IPS @ 60Hz|~| Display 2 (center): BenQ ZOWIE XL2540 1920x1080 TN @ 240Hz |~| Display 3 (rightmost): Wacom Cintiq Pro 24 3840x2160 IPS @ 60Hz 10-bit |~| OS: Windows 10 Pro (games / art) + Linux (distro: NixOS; programming and daily driver)
Link to post
Share on other sites

4 minutes ago, Princess Cadence said:

All of them are extremely overpriced for what they are, you're paying an over-tax just for the 'right' of using the ROG branding.

 

If you really want a good Z390 board go for the Aorus line up, better VRM solution, better power phases, better BIOS, memory support, cooling, etc etc... 

 

I'd go more in depth but busy at work~

Alright thanks, will try to keep an open mind about that. That does give me another question, which board would you recommend then?

 

Edited by Niekao
Link to post
Share on other sites

E is the standard ATX variant, H is based on the Prime boards which are much cheaper (still overpriced), I means mITX sized.

 

But how much can you spend really?

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites

2 minutes ago, Jurrunio said:

E is the standard ATX variant, H is based on the Prime boards which are much cheaper (still overpriced), I means mITX sized.

 

But how much can you spend really?

Not really sure. Everything just depends on what I want, if I dont have the money I’ll just wait till I have the money.  Though everything might change, because I will most likely buy my pc in September/October. 

Link to post
Share on other sites

5 minutes ago, Niekao said:

Not really sure. Everything just depends on what I want, if I dont have the money I’ll just wait till I have the money.  Though everything might change, because I will most likely buy my pc in September/October. 

lol that's way into 3rd gen Ryzen's product cycle and Intel's response for it (though not quite 10nm as that's for 2020). Think about it later.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites

8 minutes ago, Niekao said:

Not really sure. Everything just depends on what I want, if I dont have the money I’ll just wait till I have the money.  Though everything might change, because I will most likely buy my pc in September/October. 

Agree with @Jurrunio, just start saving and once ryzen 3000 comes out you can start planning

Link to post
Share on other sites

The biggest differences is in size, overclocking, and even sometimes just internal networking.

 

I'd recommend an AsRock board, or an Aorus like Princess Cadence said.


If my answer got you to your solution make sure to 'Mark Resolved!
( / . _ . / )

 

 

 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×