RGB fusion with Gskill TridentZ

[davixx500]

So i just build a new system with a Gigabyte Z390 Aorus Master and some Gskill TridentZ Royal Ram now when i use RGB fusion to control the Motherboard LEDs and Ram. The LEDs on the ram are really weird. what i mean by that is when i set them to anything besides static color they reset after a while and abrubtly flash for like half a second which is really noticeable. what i tried was then to uninstall rgb fusion and just use the Gskill rgb control software and the problem dissapeared but i cant control my motherboard leds without rgb fusion theres no option in the bios for that. My question is now did anyone have a similiar issue and perhaps has found a way to unlink the ram from rgb fusion or another way of running both at the same time ? thank you

[Wolly9102]

I use RGB fusion for the LED's on my mobo and AURA for the RAM. I've had the exact same issue and this works fine for me. Altrough I need to uses aura every time when I open fusion. which is a bit annoying. But I can't find a solution for that

[davixx500]

10 minutes ago, Wolly9102 said:

I use RGB fusion for the LED's on my mobo and AURA for the RAM. I've had the exact same issue and this works fine for me. Altrough I need to uses aura every time when I open fusion. which is a bit annoying. But I can't find a solution for that

how did u manage to unlink the ram from rgb fusion ? when i have both installed and open i can only change rgb color with fusion. 

[Wolly9102]

1 minute ago, davixx500 said:

how did u manage to unlink the ram from rgb fusion ? when i have both installed and open i can only change rgb color with fusion. 

I didn't. I close fusion every time I change the mobo lights. They will stay the same after closing because it's written to the bios. (you can even change it there)

[davixx500]

7 minutes ago, Wolly9102 said:

I didn't. I close fusion every time I change the mobo lights. They will stay the same after closing because it's written to the bios. (you can even change it there)

which option in the bios is that ? all i can find is turn the leds of or on when standby 

[Wolly9102]

12 minutes ago, davixx500 said:

which option in the bios is that ? all i can find is turn the leds of or on when standby 

Under ''peripherals'' I have the option RGB fusion. you should check if you have the same option.

[davixx500]

2 hours ago, Wolly9102 said:

Under ''peripherals'' I have the option RGB fusion. you should check if you have the same option.

dont seem to have the same option on my z390 aorus master latest bios too

[Wolly9102]

13 hours ago, davixx500 said:

dont seem to have the same option on my z390 aorus master latest bios too

Weird. I've looked at your Manual and I can't find it there. Guess you don't have it. Altrough I would have suspected you did since your board looks more feature rich than mine does 

[davixx500]

7 hours ago, Wolly9102 said:

Weird. I've looked at your Manual and I can't find it there. Guess you don't have it. Altrough I would have suspected you did since your board looks more feature rich than mine does 

yea seems like i just have to live with it. thanks for your effort tho! 

[WTFocus]

Bump, having the same issues. very annoying might just sell the G Skills

[HoneyBadger84]

It's a software issue. Gigabyte and GSkill's software conflict with each other. I have the same issue. One day the RAM just disappeared from RGB Fusion and nothing brings them back. Tbh, GSkill's control software is better and has more options, for the RAM at least. 

 

GSkill's software is still in beta technically I think, and I'm sure that's why it conflicts with rgb fusion 2.0

[DBH]

I fking swear, i have the same fking issue with my Auros z390 Xtreme motherboard and Trident Z royal ram!  If I turn on the Wave 2 in RGB fusion the RAM completely shuts off.....I seriously feel like an ass after installing that piece of shit software. Any help would be appreciated

[iAzriel]

On my Z390 Aorus pro, Fusion can't even see the Trident Z and I am stuck with its default rainbow effect...fucking annoying...