identifying/unidentiyed no internet access

[rubbermeal]

I had this issue with my old Ethernet cable bought a new cable it worked fine but now the new cable has the same issue and when I run the troubleshooter it says Ethernet doesn't have a valid ip config

and when I type ip config it has a different ip which starts with 164 btw I tried the cable on my playstation 3 and it worked fine 

[Lurick]

The IP you're seeing means it cannot talk to the router to get a DHCP address (It should actually be a 169.254.x.x address). What router do to you have?

[rubbermeal]

HUA

4 minutes ago, Lurick said:

The IP you're seeing means it cannot talk to the router to get a DHCP address (It should actually be a 169.254.x.x address). What router do to you have?

WAI HG658 but the cable worked fine for like 3 weeks

[rubbermeal]

Can I add an ip manually??

6 minutes ago, Lurick said:

The IP you're seeing means it cannot talk to the router to get a DHCP address (It should actually be a 169.254.x.x address). What router do to you have?

 

[Lurick]

Just now, rubbermeal said:

Can I add an ip manually??

 

You can try to, yes.

What IP is your playstation getting?

[rubbermeal]

5 minutes ago, Lurick said:

You can try to, yes.

What IP is your playstation getting?

I will check

[rubbermeal]

14 minutes ago, Lurick said:

You can try to, yes.

What IP is your playstation getting?

its 192.168.1.5

[Lurick]

Just now, rubbermeal said:

its 192.168.1.5

Try setting the IP on the PC to:

192.168.1.200

255.255.255.0

192.168.1.1

 

DNS Settings:

8.8.8.8

8.8.4.4

 

The config will look like this:

[rubbermeal]

6 minutes ago, Lurick said:

Try setting the IP on the PC to:

192.168.1.200

255.255.255.0

192.168.1.1

 

DNS Settings:

8.8.8.8

8.8.4.4

 

The config will look like this:

didn't work ):

[Master Disaster]

netsh winsock reset

 

In an elevated command prompt. Make sure you reset your IP settings to Auto too.

[rubbermeal]

20 minutes ago, Master Disaster said:

netsh winsock reset

 

In an elevated command prompt. Make sure you reset your IP settings to Auto too.

didnt work

[Master Disaster]

Open CMD and enter

 

ipconfig /all

 

then take a screenshot and post it please.

[rubbermeal]

12 minutes ago, Master Disaster said:

Open CMD and enter

 

 

ipconfig /all

 

 

then take a screenshot and post it please.

 

[Master Disaster]

3 minutes ago, rubbermeal said:

 

You didn't reset your IP settings to Auto and are still trying to force your gateway and DNS servers.

 

Please go into your IP settings, set IP & DNS to Auto Obtain, run the winsock reset command again then reboot.

 

If that doesn't work we'll look at the config again and see if we can force a connection.

[rubbermeal]

Just now, Master Disaster said:

You didn't reset your IP settings to Auto and are still trying to force your gateway and DNS servers.

 

Please go into your IP settings, set IP & DNS to Auto Obtain, run the winsock reset command again then reboot.

 

If that doesn't work we'll look at the config again and see if we can force a connection.

ok

[rubbermeal]

12 minutes ago, Master Disaster said:

You didn't reset your IP settings to Auto and are still trying to force your gateway and DNS servers.

 

Please go into your IP settings, set IP & DNS to Auto Obtain, run the winsock reset command again then reboot.

 

If that doesn't work we'll look at the config again and see if we can force a connection.

 

[rubbermeal]

2 hours ago, Master Disaster said:

You didn't reset your IP settings to Auto and are still trying to force your gateway and DNS servers.

 

Please go into your IP settings, set IP & DNS to Auto Obtain, run the winsock reset command again then reboot.

 

If that doesn't work we'll look at the config again and see if we can force a connection.

?? ^^^^^^^^^^^^^