Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
Splashboy3

Overclocked 1800X- showing in RM but not in Task Manager

Recommended Posts

Posted · Original PosterOP

Hey guys- so I'm trying to get my 1800X to a stable 4.0ghz and I figured Ryzen Master was easier than messing around in BIOS, and currently when I pull the app up it claims i'm running at 4.0ghz with a voltage of 1.381, but when I go into task manager its hovering around 3.7-3.9 and the base clock in task manager says 3.85. 

If I go into my BIOS, will it read the same clock and voltage that ryzen master does? Bit confused.

Thanks!

Link to post
Share on other sites

Do not use Task Manager to verify a CPU overclock (your not the only one it lies to ;) ).  Use CPU-Z and HWInfo


Workstation Laptop: Dell Precision 7540, Xeon E-2276M, 32gb DDR4, Quadro T2000 GPU, 4k display

Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, AMD R9 Fury X w/ Swiftech KOMODO waterblock, Custom Loop 2x240mm + 1x120mm radiators in push/pull 16gb (2x8) 3600mhz V-Color Skywalker (or 4x8gb DDR4 2666mhz for large tasks), Corsair HX850 PSU, 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, 512GB TeamGroup MS30 M.2 SATA III, CoolerMaster HAF XM Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Viotek GN24C 24" 1080p 144hz curved and Hannspree HF207 as 2nd monitor

https://www.3dmark.com/3dm/37004594?

Ryzen Rig 1: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Acer XF270HU 2560x1440 144hz IPS monitor

https://www.3dmark.com/3dm/37628874?

Dwight: The Mixed Metals Loop Media Center.  Ask me about it.  Currently decommissioned to move to an mATX setup on a new MOBO once I pick one out (getting its facelift as of June 2020 have new air cooler, drives etc.  About 60% finished.  Will no longer be a closed loop system.  Slight update, upgraded to larger SSD, and air cooling installed Arctic Alpine cooler.

Schrute: ASUS M5A99FX Pro R2.0, FX 8350, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (4x4) Corsair Vengeance DDR3 1600mhz, Sparkle/FSP 650w PSU, Corsair H100i GTX 240mm AIO w/ 12mm thick fans to fit in top exhaust, 256gb TIMETEC SSD, 1tb WDBlack HDD, Rosewill Nautilus 1.0 case.  DSI 90-Key Mechanical Keyboard w/ Cherry Red switches, Zalman gaming mouse

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 2x4gb DDR3 1600, Team Group 120gb SSD, 500gb Seagate 7mm HDD attached storage, Windows 10 Pro, Logitech K400+, USB Wifi adapter all vesa mounted to the back of a 37" 1080p TV 

Linux Box: Toshiba Laptop, i7 620M, NVS graphics, 4gb ram tinker toy at the moment.  Running Manjaro XFCE at the moment.

Home Security: ZOSI 8 channel CCTV (4 used at this time, 1080p) DVR H.265+, 3tb HGST Enterprise HDD, ASUS monitor for display

Link to post
Share on other sites
Posted · Original PosterOP
2 minutes ago, Tristerin said:

Do not use Task Manager to verify a CPU overclock (your not the only one it lies to ;) ).  Use CPU-Z and HWInfo

Oh. Okay then. Lol. What does HWinfo do?

Does CPU-Z show GPU temps as well? I kinda want a one-does-it-all app because i've heard some people say NZXT's CAM is total bloatware and inaccurate too.

Link to post
Share on other sites
6 minutes ago, Splashboy3 said:

Oh. Okay then. Lol. What does HWinfo do?

Does CPU-Z show GPU temps as well? I kinda want a one-does-it-all app because i've heard some people say NZXT's CAM is total bloatware and inaccurate too.

HWInfo shows...everything

HWMonitor is smaller, less detail

CPU-Z and its sister GPU-Z may show temps, but they are buried on a tab and overall this program is just used to validate information about the system but is accurate.

 

I have them both, use HWMonitor more often as its simplistic but when wanting the exacts on everything use HWInfo


Workstation Laptop: Dell Precision 7540, Xeon E-2276M, 32gb DDR4, Quadro T2000 GPU, 4k display

Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, AMD R9 Fury X w/ Swiftech KOMODO waterblock, Custom Loop 2x240mm + 1x120mm radiators in push/pull 16gb (2x8) 3600mhz V-Color Skywalker (or 4x8gb DDR4 2666mhz for large tasks), Corsair HX850 PSU, 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, 512GB TeamGroup MS30 M.2 SATA III, CoolerMaster HAF XM Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Viotek GN24C 24" 1080p 144hz curved and Hannspree HF207 as 2nd monitor

https://www.3dmark.com/3dm/37004594?

Ryzen Rig 1: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Acer XF270HU 2560x1440 144hz IPS monitor

https://www.3dmark.com/3dm/37628874?

Dwight: The Mixed Metals Loop Media Center.  Ask me about it.  Currently decommissioned to move to an mATX setup on a new MOBO once I pick one out (getting its facelift as of June 2020 have new air cooler, drives etc.  About 60% finished.  Will no longer be a closed loop system.  Slight update, upgraded to larger SSD, and air cooling installed Arctic Alpine cooler.

Schrute: ASUS M5A99FX Pro R2.0, FX 8350, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (4x4) Corsair Vengeance DDR3 1600mhz, Sparkle/FSP 650w PSU, Corsair H100i GTX 240mm AIO w/ 12mm thick fans to fit in top exhaust, 256gb TIMETEC SSD, 1tb WDBlack HDD, Rosewill Nautilus 1.0 case.  DSI 90-Key Mechanical Keyboard w/ Cherry Red switches, Zalman gaming mouse

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 2x4gb DDR3 1600, Team Group 120gb SSD, 500gb Seagate 7mm HDD attached storage, Windows 10 Pro, Logitech K400+, USB Wifi adapter all vesa mounted to the back of a 37" 1080p TV 

Linux Box: Toshiba Laptop, i7 620M, NVS graphics, 4gb ram tinker toy at the moment.  Running Manjaro XFCE at the moment.

Home Security: ZOSI 8 channel CCTV (4 used at this time, 1080p) DVR H.265+, 3tb HGST Enterprise HDD, ASUS monitor for display

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×