Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
Rhaemond

Overcloking A Ryzen 3 2200g

Recommended Posts

Posted · Original PosterOP

So I tried an AIDA64 test on it for 10 minutes, 

 

This was the result: https://ibb.co/J5J7M0J 

 

Question, why is it so hot at stock speeds but 100% load? The CPU RPM seems to be only at 1800... Should I ramp that up??? Or doesn't it adjust itself automatically? Please do not that I also have 3 fans in the case...

Another, would overclocking it to 3.8 would be risky at the moment until I add more cooling solutions????

 

 

Here are my specs, btw:

Motherboard: MSI B450m Bazooka Plus

Processor: Ryzen 3 2200g w/ Wraith Stealth Cooler

RAM: 8gb Ballistix Sport

GPU: GeForce GTX 1060 6GB

PSU: FSP Aurum 92+ 650W

Case: Tecware Nexus M + 3 fans

Storage: Seagate BarraCuda 250GB, Western Digital WD Green 1TB, Crucial BX500 480GB

 

Yes, I know only have the stock cooler in but I will either get a Gammaxx 400 or a liquid cooling if I really need to. Right now, I see no need to add more cooling since I've seen a lot of people overclocking their 2200's with the stock coolers


Motherboard: MSI B450m Bazooka Plus

Processor: Ryzen 3 2200g w/ Wraith Stealth Cooler (3900 OC)

RAM: DELTA TUF Gaming Alliance RGB 3200mhz 8gb x2(3333mhz OC)

GPU: GeForce GTX 1060 6GB

PSU: FSP Aurum 92+ 650W

Case: Tecware Nexus M + 3 fans

Storage: Seagate BarraCuda 250GB, Western Digital WD Green 1TB, Crucial BX500 480GB

Link to post
Share on other sites

hot because stock voltage is ridiculously high. I've seen many 2200G use about 1.25V to clock 3.5GHz


"What's under the heatsink?" ep1, "Why it's not as good as it seem?" AMD fanboy edition out, episode 2 "Why my gaming board is a scam?" Intel fanboy edition coming soon (this is a link)

Hardware specs below

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.4?V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: 1TB HP EX920 PCIe x4 M.2 SSD + 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172), 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites
Posted · Original PosterOP
2 minutes ago, Jurrunio said:

hot because stock voltage is ridiculously high. I've seen many 2200G use about 1.25V to clock 3.5GHz

So I should just lower the voltage then??? Is it still safe to attempt an overclock now?


Motherboard: MSI B450m Bazooka Plus

Processor: Ryzen 3 2200g w/ Wraith Stealth Cooler (3900 OC)

RAM: DELTA TUF Gaming Alliance RGB 3200mhz 8gb x2(3333mhz OC)

GPU: GeForce GTX 1060 6GB

PSU: FSP Aurum 92+ 650W

Case: Tecware Nexus M + 3 fans

Storage: Seagate BarraCuda 250GB, Western Digital WD Green 1TB, Crucial BX500 480GB

Link to post
Share on other sites
1 minute ago, Rhaemond said:

So I should just lower the voltage then??? Is it still safe to attempt an overclock now?

two ways, you could just overclock the CPU while keeping voltages the same, or lower the voltage and not overclock as much.


"What's under the heatsink?" ep1, "Why it's not as good as it seem?" AMD fanboy edition out, episode 2 "Why my gaming board is a scam?" Intel fanboy edition coming soon (this is a link)

Hardware specs below

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.4?V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: 1TB HP EX920 PCIe x4 M.2 SSD + 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172), 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites
Posted · Original PosterOP
1 minute ago, Jurrunio said:

two ways, you could just overclock the CPU while keeping voltages the same, or lower the voltage and not overclock as much.

Is 3800 at 1.29 relatively safe? 


Motherboard: MSI B450m Bazooka Plus

Processor: Ryzen 3 2200g w/ Wraith Stealth Cooler (3900 OC)

RAM: DELTA TUF Gaming Alliance RGB 3200mhz 8gb x2(3333mhz OC)

GPU: GeForce GTX 1060 6GB

PSU: FSP Aurum 92+ 650W

Case: Tecware Nexus M + 3 fans

Storage: Seagate BarraCuda 250GB, Western Digital WD Green 1TB, Crucial BX500 480GB

Link to post
Share on other sites

You should be able to manually set voltage to 1.35v and frequency to 3.8-3.9. Temps wont increase because that's the same voltage it was running stock.

Link to post
Share on other sites
Posted · Original PosterOP
1 minute ago, schwellmo92 said:

You should be able to manually set voltage to 1.35v and frequency to 3.8-3.9. Temps wont increase because that's the same voltage it was running stock.

The MSI b450m bazooka plus bios is very confusing. Any chance you can help me on what settings to tweak??? 


Motherboard: MSI B450m Bazooka Plus

Processor: Ryzen 3 2200g w/ Wraith Stealth Cooler (3900 OC)

RAM: DELTA TUF Gaming Alliance RGB 3200mhz 8gb x2(3333mhz OC)

GPU: GeForce GTX 1060 6GB

PSU: FSP Aurum 92+ 650W

Case: Tecware Nexus M + 3 fans

Storage: Seagate BarraCuda 250GB, Western Digital WD Green 1TB, Crucial BX500 480GB

Link to post
Share on other sites

You can even set slight negative offset voltage, which could spare a few degrees. (-100mV cpu core& vcore). 

 

And if you do plan to OC, get a better cooler. Wraith stealth is just not really a powerful cooler. Something like DeepCool Gammaxx300, ID Cooling SE-213v2 would be perfectly sufficient! I would not recommend OC-ing with stock stealth cooler, first, it's loud and annoying as a beehive, second, it has sub-par cooling performance.

Link to post
Share on other sites
Posted · Original PosterOP
3 minutes ago, Vejnemojnen said:

You can even set slight negative offset voltage, which could spare a few degrees. (-100mV cpu core& vcore). 

 

And if you do plan to OC, get a better cooler. Wraith stealth is just not really a powerful cooler. Something like DeepCool Gammaxx300, ID Cooling SE-213v2 would be perfectly sufficient! I would not recommend OC-ing with stock stealth cooler, first, it's loud and annoying as a beehive, second, it has sub-par cooling performance.

Yea I will get a gammaxx 300 in the future. But right now, this is just somewhat of a training for me. Anyways, I need help on the Bios... I can't seem to navigate it that well. Which of the settings do I change? I've been looking at tutorials but none of them so far have been using an MSI gaming arsenal bios... 


Motherboard: MSI B450m Bazooka Plus

Processor: Ryzen 3 2200g w/ Wraith Stealth Cooler (3900 OC)

RAM: DELTA TUF Gaming Alliance RGB 3200mhz 8gb x2(3333mhz OC)

GPU: GeForce GTX 1060 6GB

PSU: FSP Aurum 92+ 650W

Case: Tecware Nexus M + 3 fans

Storage: Seagate BarraCuda 250GB, Western Digital WD Green 1TB, Crucial BX500 480GB

Link to post
Share on other sites
18 minutes ago, Rhaemond said:

Is 3800 at 1.29 relatively safe? 

You can use up to 1.4v :D

 

You're cooling limited, not voltage for now.


"What's under the heatsink?" ep1, "Why it's not as good as it seem?" AMD fanboy edition out, episode 2 "Why my gaming board is a scam?" Intel fanboy edition coming soon (this is a link)

Hardware specs below

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.4?V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: 1TB HP EX920 PCIe x4 M.2 SSD + 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172), 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites
Posted · Original PosterOP
2 minutes ago, Jurrunio said:

You can use up to 1.4v :D

 

You're cooling limited, not voltage for now.

Alright. Another question, what override and offset mode? I know auto just let's the board set the voltages automatically.. But what is the difference between offset and override and which is better to use to set the voltages? 


Motherboard: MSI B450m Bazooka Plus

Processor: Ryzen 3 2200g w/ Wraith Stealth Cooler (3900 OC)

RAM: DELTA TUF Gaming Alliance RGB 3200mhz 8gb x2(3333mhz OC)

GPU: GeForce GTX 1060 6GB

PSU: FSP Aurum 92+ 650W

Case: Tecware Nexus M + 3 fans

Storage: Seagate BarraCuda 250GB, Western Digital WD Green 1TB, Crucial BX500 480GB

Link to post
Share on other sites
1 minute ago, Rhaemond said:

Alright. Another question, what override and offset mode? I know auto just let's the board set the voltages automatically.. But what is the difference between offset and override and which is better to use to set the voltages? 

override is just static voltage, i.e. manual mode. offset is... offset based on auto settings.

 

Ryzen has stupid clock speed control when you overclock, just use manual mode.


"What's under the heatsink?" ep1, "Why it's not as good as it seem?" AMD fanboy edition out, episode 2 "Why my gaming board is a scam?" Intel fanboy edition coming soon (this is a link)

Hardware specs below

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.4?V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: 1TB HP EX920 PCIe x4 M.2 SSD + 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172), 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites
Posted · Original PosterOP
1 minute ago, Jurrunio said:

override is just static voltage, i.e. manual mode. offset is... offset based on auto settings.

 

Ryzen has stupid clock speed control when you overclock, just use manual mode.

So should I just override then??? Alright. 


Motherboard: MSI B450m Bazooka Plus

Processor: Ryzen 3 2200g w/ Wraith Stealth Cooler (3900 OC)

RAM: DELTA TUF Gaming Alliance RGB 3200mhz 8gb x2(3333mhz OC)

GPU: GeForce GTX 1060 6GB

PSU: FSP Aurum 92+ 650W

Case: Tecware Nexus M + 3 fans

Storage: Seagate BarraCuda 250GB, Western Digital WD Green 1TB, Crucial BX500 480GB

Link to post
Share on other sites
Posted · Original PosterOP

Max of 74° on a 10 minute stress test on AIDA64 with stock cooler... Looks fine? @Jurrunio@schwellmo92@Vejnemojnen


Motherboard: MSI B450m Bazooka Plus

Processor: Ryzen 3 2200g w/ Wraith Stealth Cooler (3900 OC)

RAM: DELTA TUF Gaming Alliance RGB 3200mhz 8gb x2(3333mhz OC)

GPU: GeForce GTX 1060 6GB

PSU: FSP Aurum 92+ 650W

Case: Tecware Nexus M + 3 fans

Storage: Seagate BarraCuda 250GB, Western Digital WD Green 1TB, Crucial BX500 480GB

Link to post
Share on other sites
40 minutes ago, Rhaemond said:

Max of 74° on a 10 minute stress test on AIDA64 with stock cooler... Looks fine? @Jurrunio@schwellmo92@Vejnemojnen

fine. Did you apply some level of LLC (loadline calibration)?


"What's under the heatsink?" ep1, "Why it's not as good as it seem?" AMD fanboy edition out, episode 2 "Why my gaming board is a scam?" Intel fanboy edition coming soon (this is a link)

Hardware specs below

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.4?V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: 1TB HP EX920 PCIe x4 M.2 SSD + 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172), 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites
Posted · Original PosterOP
11 minutes ago, Jurrunio said:

fine. Did you apply some level of LLC (loadline calibration)?

What does that mean and how do I do that 

Oh I also, overclocked my Ballistix sport 2666 to 3000 on auto voltage. 


Motherboard: MSI B450m Bazooka Plus

Processor: Ryzen 3 2200g w/ Wraith Stealth Cooler (3900 OC)

RAM: DELTA TUF Gaming Alliance RGB 3200mhz 8gb x2(3333mhz OC)

GPU: GeForce GTX 1060 6GB

PSU: FSP Aurum 92+ 650W

Case: Tecware Nexus M + 3 fans

Storage: Seagate BarraCuda 250GB, Western Digital WD Green 1TB, Crucial BX500 480GB

Link to post
Share on other sites
39 minutes ago, Rhaemond said:

What does that mean and how do I do that 

Oh I also, overclocked my Ballistix sport 2666 to 3000 on auto voltage. 

Update the bios if you can't see that option

 

1.2V? Not surprising though the memory timings could be terrible. I'd suggest you tune the CPU overclocks first before the memory. 1.35V normally for factory XMP profiles (for sticks that have it), 1.5V max for daily use.


"What's under the heatsink?" ep1, "Why it's not as good as it seem?" AMD fanboy edition out, episode 2 "Why my gaming board is a scam?" Intel fanboy edition coming soon (this is a link)

Hardware specs below

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.4?V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: 1TB HP EX920 PCIe x4 M.2 SSD + 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172), 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites
2 hours ago, Rhaemond said:

Max of 74° on a 10 minute stress test on AIDA64 with stock cooler... Looks fine? @Jurrunio@schwellmo92@Vejnemojnen

Yep that’s fine, double check what voltage you are maintaining in the stress test via a monitoring software. If your voltage is dropping from what you set you may need to up the LLC if your motherboard has that feature. Other than that also try setting an XMP profile for your RAM to a higher frequency around 3000.

Link to post
Share on other sites
Posted · Original PosterOP
1 hour ago, Jurrunio said:

Update the bios if you can't see that option

 

1.2V? Not surprising though the memory timings could be terrible. I'd suggest you tune the CPU overclocks first before the memory. 1.35V normally for factory XMP profiles (for sticks that have it), 1.5V max for daily use.

I have already updated it but idk what, LLC actually is it might be in front of me but I can't seem to notice it. 

The auto is at 1.35v

38 minutes ago, schwellmo92 said:

Yep that’s fine, double check what voltage you are maintaining in the stress test via a monitoring software. If your voltage is dropping from what you set you may need to up the LLC if your motherboard has that feature. Other than that also try setting an XMP profile for your RAM to a higher frequency around 3000.

LLC? I don't get that. 

As for the RAM, it's auto is at 1.35v and there it's actually on manual since the only 2 XMP profiles are at 2400 and 2666


Motherboard: MSI B450m Bazooka Plus

Processor: Ryzen 3 2200g w/ Wraith Stealth Cooler (3900 OC)

RAM: DELTA TUF Gaming Alliance RGB 3200mhz 8gb x2(3333mhz OC)

GPU: GeForce GTX 1060 6GB

PSU: FSP Aurum 92+ 650W

Case: Tecware Nexus M + 3 fans

Storage: Seagate BarraCuda 250GB, Western Digital WD Green 1TB, Crucial BX500 480GB

Link to post
Share on other sites
2 minutes ago, Rhaemond said:

I have already updated it but idk what, LLC actually is it might be in front of me but I can't seem to notice it. 

The auto is at 1.35v

LLC is loadline calibration's shortened name. without it the core voltage drops when the CPU goes from idle to full load. loadline calibration is meant to compensate for it


"What's under the heatsink?" ep1, "Why it's not as good as it seem?" AMD fanboy edition out, episode 2 "Why my gaming board is a scam?" Intel fanboy edition coming soon (this is a link)

Hardware specs below

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.4?V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: 1TB HP EX920 PCIe x4 M.2 SSD + 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172), 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites
Posted · Original PosterOP
18 minutes ago, Jurrunio said:

LLC is loadline calibration's shortened name. without it the core voltage drops when the CPU goes from idle to full load. loadline calibration is meant to compensate for it

Let me see what I can do with that! 


Motherboard: MSI B450m Bazooka Plus

Processor: Ryzen 3 2200g w/ Wraith Stealth Cooler (3900 OC)

RAM: DELTA TUF Gaming Alliance RGB 3200mhz 8gb x2(3333mhz OC)

GPU: GeForce GTX 1060 6GB

PSU: FSP Aurum 92+ 650W

Case: Tecware Nexus M + 3 fans

Storage: Seagate BarraCuda 250GB, Western Digital WD Green 1TB, Crucial BX500 480GB

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Buy VPN

×