Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
Maverick262001

RAM OC to 4Ghz on i7 9700k

Recommended Posts

With utter garbage timings (and hence low performance) and a T-topology board like the Gigabyte Aorus Master, yes


"What's under the heatsink?" ep1, "Why it's not as good as it seem?" AMD fanboy edition out, episode 2 "Why my gaming board is a scam?" Intel fanboy edition coming soon (this is a link)

Hardware specs below

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.4?V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: 1TB HP EX920 PCIe x4 M.2 SSD + 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172), 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites
Posted · Original PosterOP
29 minutes ago, Jurrunio said:

With utter garbage timings (and hence low performance) and a T-topology board like the Gigabyte Aorus Master, yes

Didn't get you brother... could you say in a more simpler and elaborated way😅

Link to post
Share on other sites
3 minutes ago, Maverick262001 said:

Didn't get you brother... could you say in a more simpler and elaborated way😅

it's possible but unrealistic and not profitable


"What's under the heatsink?" ep1, "Why it's not as good as it seem?" AMD fanboy edition out, episode 2 "Why my gaming board is a scam?" Intel fanboy edition coming soon (this is a link)

Hardware specs below

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.4?V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: 1TB HP EX920 PCIe x4 M.2 SSD + 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172), 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites
38 minutes ago, Jurrunio said:

With utter garbage timings (and hence low performance) and a T-topology board like the Gigabyte Aorus Master, yes

Many 4000 kits are CL19, which is equivalent in latency to 3200C15, so it's not actually bad, plus you get the benefit from both having dual rank per channel on top of the increased bandwidth. If you use a bandwidth sensitive application, it would help.

 

However, I'd hate to imagine the chances of success at running 4 modules at 4000. I've never tried but it does seem rather hit and miss if a particular board/CPU combo will go that high. So if you really need more ram bandwidth, X299 is the more obvious choice.


Main rig: Asus Maximus VIII Hero, i7-6700k stock, Noctua D14, G.Skill Ripjaws V 3200 2x8GB, Gigabyte GTX 1650, Corsair HX750i, In Win 303 NVIDIA, Samsung SM951 512GB, WD Blue 1TB, HP LP2475W 1200p wide gamut

Gaming system: Asrock Z370 Pro4, i7-8086k stock, Noctua D15, Corsair Vengeance LPX RGB 3000 2x8GB, Gigabyte RTX 2070, Fractal Edison 550W PSU, Corsair 600C, Optane 900p 280GB, Crucial MX200 1TB, Sandisk 960GB, Acer Predator XB241YU 1440p 144Hz G-sync

Ryzen rig: Asrock B450 ITX, R5 3600, Noctua D9L, Corsair Vengeance LPX RGB 3000 2x4GB, EVGA GTX 970, Corsair CX450M, NZXT Manta, Crucial MX300 525GB, Acer RT280K

VR rig: Asus Z170I Pro Gaming, i7-6600k stock, Silverstone TD03-E, Kingston Hyper-X 2666 2x8GB, Zotac 1070 FE, Corsair CX450M, Silverstone SG13, Samsung PM951 256GB, HTC Vive

Gaming laptop: Asus FX503VD, i5-7300HQ, 2x8GB DDR4, GTX 1050, Sandisk 256GB SSD

Total CPU heating: i7-7800X, i7-5930k, i7-5820k, 2x i7-6700k, i7-6700T, i5-6600k, i7-5775C, i5-5675C, i5-4570S, i3-8350k, i3-6100, i3-4360, i3-4150T, E5-2683v3, 2x E5-2650, E5-2667, R7 3700X, R5 3600

Link to post
Share on other sites
Posted · Original PosterOP
3 minutes ago, porina said:

Many 4000 kits are CL19, which is equivalent in latency to 3200C15, so it's not actually bad, plus you get the benefit from both having dual rank per channel on top of the increased bandwidth. If you use a bandwidth sensitive application, it would help.

 

However, I'd hate to imagine the chances of success at running 4 modules at 4000. I've never tried but it does seem rather hit and miss if a particular board/CPU combo will go that high. So if you really need more ram bandwidth, X299 is the more obvious choice.

So how high I can go with four modules and same memory config ?(100% accuracy)(no hit or miss thing)

3000?

3200?

Link to post
Share on other sites
1 minute ago, Maverick262001 said:

So how high I can go with four modules and same memory config ?(100% accuracy)(no hit or miss thing)

3000?

3200?

The problem is any speed above that supported by the CPU is a kinda overclock, even if the ram makers say they can do it. In my experience which doesn't go as far as 4000 (yet) some mobo/ram combos just don't like each other. There may be some CPU dependency too at the extreme end, not forgetting mobo bios also contributes. Also running 2 sticks per channel over 1 stick per channel will increase the loading. There's a load of variables.

 

The play it safe version would be to get 3200 Samsung B-die as that pretty much works with anything, and usually overclocks well above that. You'll probably be ok with any modern 3200 kit. By modern, let's say released since Coffee Lake as I've heard they altered some sub-timings to help compatibility compared to modules released for previous CPUs.


Main rig: Asus Maximus VIII Hero, i7-6700k stock, Noctua D14, G.Skill Ripjaws V 3200 2x8GB, Gigabyte GTX 1650, Corsair HX750i, In Win 303 NVIDIA, Samsung SM951 512GB, WD Blue 1TB, HP LP2475W 1200p wide gamut

Gaming system: Asrock Z370 Pro4, i7-8086k stock, Noctua D15, Corsair Vengeance LPX RGB 3000 2x8GB, Gigabyte RTX 2070, Fractal Edison 550W PSU, Corsair 600C, Optane 900p 280GB, Crucial MX200 1TB, Sandisk 960GB, Acer Predator XB241YU 1440p 144Hz G-sync

Ryzen rig: Asrock B450 ITX, R5 3600, Noctua D9L, Corsair Vengeance LPX RGB 3000 2x4GB, EVGA GTX 970, Corsair CX450M, NZXT Manta, Crucial MX300 525GB, Acer RT280K

VR rig: Asus Z170I Pro Gaming, i7-6600k stock, Silverstone TD03-E, Kingston Hyper-X 2666 2x8GB, Zotac 1070 FE, Corsair CX450M, Silverstone SG13, Samsung PM951 256GB, HTC Vive

Gaming laptop: Asus FX503VD, i5-7300HQ, 2x8GB DDR4, GTX 1050, Sandisk 256GB SSD

Total CPU heating: i7-7800X, i7-5930k, i7-5820k, 2x i7-6700k, i7-6700T, i5-6600k, i7-5775C, i5-5675C, i5-4570S, i3-8350k, i3-6100, i3-4360, i3-4150T, E5-2683v3, 2x E5-2650, E5-2667, R7 3700X, R5 3600

Link to post
Share on other sites
Posted · Original PosterOP
1 minute ago, porina said:

The problem is any speed above that supported by the CPU is a kinda overclock, even if the ram makers say they can do it. In my experience which doesn't go as far as 4000 (yet) some mobo/ram combos just don't like each other. There may be some CPU dependency too at the extreme end, not forgetting mobo bios also contributes. Also running 2 sticks per channel over 1 stick per channel will increase the loading. There's a load of variables.

 

The play it safe version would be to get 3200 Samsung B-die as that pretty much works with anything, and usually overclocks well above that. You'll probably be ok with any modern 3200 kit. By modern, let's say released since Coffee Lake as I've heard they altered some sub-timings to help compatibility compared to modules released for previous CPUs.

Alright brother...thank you so much.. I'm gonna buy Corsair RGB ones (3200) kit

Link to post
Share on other sites
15 minutes ago, porina said:

Many 4000 kits are CL19, which is equivalent in latency to 3200C15, so it's not actually bad, plus you get the benefit from both having dual rank per channel on top of the increased bandwidth. If you use a bandwidth sensitive application, it would help.

 

However, I'd hate to imagine the chances of success at running 4 modules at 4000. I've never tried but it does seem rather hit and miss if a particular board/CPU combo will go that high. So if you really need more ram bandwidth, X299 is the more obvious choice.

I didn't even consider 4000 CL19 as doable with 4 sticks, I'm thinking 4000 CL22 :P

 

13 minutes ago, Maverick262001 said:

So how high I can go with four modules and same memory config ?(100% accuracy)(no hit or miss thing)

3000?

3200?

3600MHz probably. The best SPD that you can run with confidence will be 3466MHz CL16 or 3600MHz CL16.


"What's under the heatsink?" ep1, "Why it's not as good as it seem?" AMD fanboy edition out, episode 2 "Why my gaming board is a scam?" Intel fanboy edition coming soon (this is a link)

Hardware specs below

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.4?V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: 1TB HP EX920 PCIe x4 M.2 SSD + 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172), 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites
Posted · Original PosterOP
4 hours ago, Jurrunio said:

I didn't even consider 4000 CL19 as doable with 4 sticks, I'm thinking 4000 CL22 :P

 

3600MHz probably. The best SPD that you can run with confidence will be 3466MHz CL16 or 3600MHz CL16.

So yeah Corsair vengeance pro RGB (3600Mhz) is the best option, right?

Link to post
Share on other sites
7 minutes ago, Maverick262001 said:

So yeah Corsair vengeance pro RGB (3600Mhz) is the best option, right?

I personally like 3333/14

 

Can do with good 3200/14 kits and will be the sweet spot personally speaking, all in all it there's really so much you need to get your memory setting covered up, if you want 32gb of memory I strongly suggest using 2x16gb since you reduce points of failure in your system.

 

Cheers


Workstation Rig:
CPU:  Intel Core i9 9900K @5.0ghz  |~| Cooling: beQuiet! Dark Rock 4 |~|  MOBO: Asus Z390M ROG Maximus XI GENE |~| RAM: 32gb 3333mhz CL15 G.Skill Trident Z RGB |~| GPU: nVidia TITAN V  |~| PSU: beQuiet! Dark Power Pro 11 80Plus Platinum  |~| Boot: Intel 660p 2TB NVMe |~| Storage: 2X4TB HDD 7200rpm Seagate Iron Wolf + 2X2TB SSD SanDisk Ultra |~| Case: Cooler Master Case Pro 3 |~| Display: Acer Predator X34 3440x1440p100hz |~| OS: Windows 10 Pro.
 
Personal Use Rig:
CPU: Intel Core i9 9900 @4.75ghz |~| Cooling: beQuiet! Shadow Rock Slim |~| MOBO: Gigabyte Z390M Gaming mATX|~| RAM: 16gb DDR4 3400mhzCL15 Viper Steel |~| GPU: nVidia Founders Edition RTX 2080 Ti |~| PSU: beQuiet! Straight Power 11 80Plus Gold  |~|  Boot:  Intel 660p 2TB NVMe |~| Storage: 2x2TB SanDisk SSD Ultra 3D |~| Case: Cooler Master Case Pro 3 |~| Display: Viotek GN34CB 3440x1440p100hz |~| OS: Windows 10 Pro.


HTPC / "Console of the house":

CPU: Intel Core i7 8700 @4.45ghz |~| Cooling: Cooler Master Hyper 212X |~| MOBO: Gigabyte Z370M D3H mATX|~| RAM: 16gb DDR4 3333mhzCL16 G.Skill Trident Z |~| GPU: nVidia Founders Edition GTX 1080 Ti |~| PSU: Corsair TX650M 80Plus Gold |~| Boot:  SSD WD Green M.2 2280 240GB |~| Storage: 1x3TB HDD 7200rpm Seagate Barracuda + SanDisk Ultra 3D 1TB |~| Case: Fractal Design Meshify C Mini |~| Display: Toshiba UL7A 4K/60hz |~| OS: Windows 10 Pro.
Link to post
Share on other sites
9 minutes ago, Maverick262001 said:

So yeah Corsair vengeance pro RGB (3600Mhz) is the best option, right?

Whatever vendor or model is not my focus, they are only different on the outsides anyway


"What's under the heatsink?" ep1, "Why it's not as good as it seem?" AMD fanboy edition out, episode 2 "Why my gaming board is a scam?" Intel fanboy edition coming soon (this is a link)

Hardware specs below

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.4?V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: 1TB HP EX920 PCIe x4 M.2 SSD + 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172), 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×