Jenkinsrino

I'd go desktop over laptop. Expressly if your desktop runs its good

I recommend adding more LEDs to your system. It is 100% guaranteed to make it go faster.

i can tell you from testing: no.

RAM is nice to have but 8gb is fine 16gb is ideal

I like it when they wear yoga pants with tight tops to show off all the curves. 

because apple makes their old devices slower with each update, I wish I could downgrade my iPad Mini to iOS 7 ;(

LOL.
 
On a side note, rest assured Malwarebytes is the best thing since sliced bread, so you aren't wasting any time in downloading it, even if it doesn't solve the issue.

What?  No.  Just run Malwarebytes man  -  https://www.malwarebytes.org/

That was one solution, but if you want to scan for a rootkit, use MalwareBytes. https://www.malwarebytes.org/

Did you use your Pepe Lightning on it? All jokes aside, how is it secured to the frame?

Look for prices in Ebay
http://www.ebay.es/itm/Intel-Core-i3-330M-2-13-GHz-Portatil-CPU-Procesador-SLBMD-J010B331-/172071526678?hash=item2810432116:g:a9EAAOSwiLdWAclg
http://www.ebay.es/itm/Intel-Core-I3-330M-2-13GHz-Processor-CPU-3MB-SLBMD-BGA1288-PGA988-/171962117702?hash=item2809bdae46:g:J3MAAOSwhcJWFmd-

That is light and can play csgo decently like 80fps

So  i currently have a hp 8530p and im looking to upgrade in the near future, i was wanting the cheapest laptop that can run minecraft or csgo with decent fps, i want it to be light and battery life dosent matter etc 
 
Thanks

If you're talking about your laptop, your laptop only supports DDR2.

half at most, but probably around 3 give or take a bit

maybe... 20-30ish%? 

The maximum amount of RAM that laptop supports is 8GB. So if you wanted to max that out, you would want 4GB*2 sticks.

What version of Windows 7 are you using? If you can find a 64-bit ISO of your current version of Windows, that'll work.

You would have to open it up and find out as I'm not sure about replacement of the CPU. As to the second question, you would have to check the thermal paste to see if it's dried out. If it is, yeah replace it. If not, it might still be worth replacing since the thermal paste might be cheap.

Download HWMonitor and tell us the temperatures. It sounds like it's pretty hot if you can feel it through the keys, and if that's the case, when's the last time you cleaned it out?

The CPU does support the x86-64 bit instruction set, so yes. You can verify this by downloading CPU-Z and looking at the supported instruction sets.

Ya, i learned alot new stuff since i joined. I watched the LTT Videos way longer tho.

It's okay I guess.
And if you haven't seen any agressive people you probably have not been to the CPU or GPU section of the forum

You'll be off the bleeding edge in a few months.
Come back when you actually built the PC and that your life isn't a lie.

Hi Guys,

I have decided to make a separate thread for this second build of Envy!
 
My previous build log was getting a little disjointed and messy! So time to clean it up with a new thread!
 
Parts list:
CPU: Intel i7 4770k at 4.6ghz
Motherboard: Asus Sabertooth Z87
Ram: 4 x 8gb 1600mhz Kingston Hyper Beast (At 2200mhz)
Graphics cards: 2 x Nvidia Palit GTX 770 and EVGA Sli bridge
PSU: Corsair AX1200i with Custom cables from SHAKMOD
SSD: 2 x 256gb Crucial M550
HDD: Western Digital 3tb green
Case: CaseLabs Mercury S8
Fans: 5x Phobia E-Loops, 2x Corsair AF120's
Cables: Custom braided cables from SHAKMOD's
 
Watercooling parts:
CPU block: EK supremacy EVO clean CSQ
GPU block: 2x EK FC clean CSQ and back plates
RAM block: EK Dominator RAM block
Reservoir: EK x3 250
Pump: EK vario D5 x2 with EK clean CSQ dual top
Front radiator: Alphacool NexXox Monsta 360mm
Front radiator: Alphacool NexXxos Monsta 240mm
Tubing: Primochill 13mm Rigid Acrylic
Fittings: Primochill Revolver and EK 45/90 degree fittings.
 
If anyone wants some kick ass cables like the ones I have in my system. Get in contact with the guys at Shakmods.co.uk. They did a brilliant job and when one of the cables was too long, they changed it for me right away! Brilliant service and great cables!