Best way to set this up to make it work with my amp

[IWearVNecks]

So I got this two sub woofer box that I had for a long time never got it set up with my current set up but been wanting to. How will I do this with RCA in and speaker wire going into center?  

http://i.imgur.com/Oljd8gt.jpg
http://i.imgur.com/niNY4XV.jpg

[Aniallation]

You'd need a line audio output on your amp, which it doesn't seem to have. 

[Skeletonfish]

if your amp doesn't have a dedicated sub out you'll need a X-over of some kind. you can get them pretty cheap on ebay

[IWearVNecks]

x-over link, The amp is part sub I just want to add this but use with the volume with the amp I got it work with just RCA to Monaural but couldn't control the volume because it wasn't an output but a line through from the PC to the amp.

[Hans Christian | Teri]

You'd need an audio output on your amp, which it doesn't seem to have. 

 

An amp without an audio output? What is the purpose of it then?

 

It depends on your setup honestly, it's really hard to tell from the picture. Is the sub active? As Skeletonfish said you're probably gonna need a x-over which can be had for ridiculously cheap these days. To put it in perspective Behringer has a decent unit. Not amazing but you don't seem to be exactly running a hi-fi setup anyways.

[IWearVNecks]

Whatever this is its a tandberg TTC1-01 and the amp/sub combo whatever it is was a walmart item from 2004 nothing special just want a way to get it connected.

[Skeletonfish]

Whatever this is its a tandberg TTC1-01 and the amp/sub combo whatever it is was a walmart item from 2004 nothing special just want a way to get it connected.

that's an odd looking box you got there. looks like its going to need a X-over

you could try to just put a signal into to see if it has a built in X-over

Edited March 21, 2015 by Skeletonfish

[IWearVNecks]

that's an odd looking box you got there. looks like its going to need a X-over

you could try to just put a signal into to see if it has a built in X-over

It works if I put a Single to RCA and plug it into the http://imagehost.vendio.com/preview/pl/plegend2001/female.JPG but I can't control the volume from the amp I need to change it from windows it self since its not being outputted from the amp it self if that makes sense.

[Skeletonfish]

It works if I put a Single to RCA and plug it into the http://imagehost.vendio.com/preview/pl/plegend2001/female.JPG but I can't control the volume from the amp I need to change it from windows it self since its not being outputted from the amp it self if that makes sense.

unfortunately you cant really work around that, you need an output on the amp. so to do what you want you will have to run it through some form of preamp to control the volume