Is an AIO enough?

[nick name]

Hey guys so I have a 360 AIO but it seems like it might not be enough to cool my system.  I was wondering if I should go full open loop with a block on my CPU and VRM and then extend that to my RAM and also my chipset.  Please only respond if you feel like contributing to my bs post about my bs temperatures.  I don't wanna deal with serious advice that calls out my bs because that would be too serious.  

[LukeSavenije]

I wouldn't say those temps are too bad. 60 degrees seems fine to me

[Shimejii]

You didnt go above 65C, the hell do you "Need" a full custom loop Your well withing Temp limits

[Quadriplegic]

Nah mate, you need to jerry rig Intel stock cooler on it, custom loop won't be enough either.
 

[Jimkirk363]

I agree, The AIO seems to be doing its job, no need to go full loop.  My Temps with the same chip using my AIO listed in my signature i don't go over mid 60*cs either at full load.

[LukeSavenije]

5 minutes ago, Quadriplegic said:

Nah mate, you need to jerry rig Intel stock cooler on it, custom loop won't be enough either.
 

jerry rig? what about a aquarium cooler like intel did

[bleedblue]

You're well within the recommended operating temps lol

[nick name]

I dunno guys.  I saw 10.8*C on my RAM and that seems super high.  

[Cereal5]

I think you need to connect a custom loop to your car's radiator because only that radiator has enough cooling capacity to keep your current rig cool enough. And make sure you park the car inside and close all your doors and windows so you die of carbon monoxide poisoning while you're at it turn the fan on.

[nick name]

1 minute ago, Cereal5 said:

I think you need to connect a custom loop to your car's radiator because only that radiator has enough cooling capacity to keep your current rig cooler enough. And make sure you park the car inside and close all your doors in windows so you die of carbon monoxide poisoning while you're at it turn the fan on.

This is the spirit in which I posted.  I hope everyone contributes suicide relevant advice.  

[Cereal5]

3 minutes ago, nick name said:

This is the spirit in which I posted.  I hope everyone contributes suicide relevant advice.  

inb4 double ban

[GoldenLag]

23 minutes ago, nick name said:

This is the spirit in which I posted.  I hope everyone contributes suicide relevant advice.  

Rememver to test the fan by sticking your finger in it. The blowymatrons arebt allways working even if they are spinning. 

 

/s

[SydneySideSteveSomewheres]

13 minutes ago, GoldenLag said:

Rememver to test the fan by sticking your finger in it. The blowymatrons arebt allways working even if they are spinning. 

 

/s

4

I thought you test fans (especially blowymatrons) the same way you test whether 9 Volt batteries are exhausted, by touching / bridging both contacts with your tongue, no?

[nick name]

9 hours ago, GoldenLag said:

Rememver to test the fan by sticking your finger in it. The blowymatrons arebt allways working even if they are spinning. 

 

/s

Lol I have an open air case and recently broke a Noctua fan by reaching in front of it while in operation and it struck the inside of my flabby bicep which broke off a blade.  

[Tristerin]

Not sure I understand the question, or if you don't understand the temp readouts...

[nick name]

Just now, Tristerin said:

Not sure I understand the question, or if you don't understand the temp readouts...

No, I was being ridiculous with my question to amuse myself.  I tried to make the OP reflect I wasn't serious, but that didn't work.  

[GoldenLag]

4 minutes ago, nick name said:

Lol I have an open air case and recently broke a Noctua fan by reaching in front of it while in operation and it struck the inside of my flabby bicep which broke off a blade.  

this isnt no simple Noctua fan. this is the blowymatron we are talking about. 

[Tristerin]

1 minute ago, nick name said:

No, I was being ridiculous with my question to amuse myself.  I tried to make the OP reflect I wasn't serious, but that didn't work.  

10-4 - tbh your temps are ridiculously out of control and I think only a nitrogen loop is going to fix your problems.

[nick name]

2 minutes ago, GoldenLag said:

this isnt no simple Noctua fan. this is the blowymatron we are talking about. 

Oh, I know.  I just thought it funny to mention my Noctua because it happened recently.  I can only imagine what a blowymatron would have done to my arm.  I am surprised my Noctua broke.  I am assuming the blade pinched my skin between itself and the fan housing just right causing it to sheer off.  

[nick name]

3 minutes ago, Tristerin said:

10-4 - tbh your temps are ridiculously out of control and I think only a nitrogen loop is going to fix your problems.

I don't like negative temps.  I prefer my temps with a better can-do attitude.  

[Tristerin]

3 minutes ago, nick name said:

I don't like negative temps.  I prefer my temps with a better can-do attitude.  

You cant spell temps without spmet.  I feel ya bro

[nick name]

2 minutes ago, Tristerin said:

You cant spell temps without spmet.  I feel ya bro

Honestly, I can't even spell tmeps.  See.  I only know it's wrong because of the red squiggly line under it, but I have no idea how to fix it.  Tmpes?  Nope, still wrong.