I5 8600k oc

[Newgaming]

I overclock my cpu to 5ghz 1.3 v

My cinebench result is 1081, isit okay ? 

 

[Amaranth]

That's fine, just make sure you don't have an absurd LLC enabled and that you're staying under 85c for 24/7 use.

[wojtepanik]

https://www.guru3d.com/articles-pages/intel-core-i5-8600k-processor-review,7.html

[Newgaming]

1 minute ago, Amaranth said:

That's fine, just make sure you don't have an absurd LLC enabled and that you're staying under 85c for 24/7 use.

What is LLC ? 

[Newgaming]

1 minute ago, wojtepanik said:

https://www.guru3d.com/articles-pages/intel-core-i5-8600k-processor-review,7.html

I saw people getting 1200+ on 5ghz

[Amaranth]

1 minute ago, Newgaming said:

What is LLC ? 

Load Line Calibration

 

You want to make sure that your LLC setting is not going to push your vCore over 1.42v for CoffeeLake (although I personally wouldn't go over 1.39v or 1.40v to be on the safe side).

[Amaranth]

1 minute ago, Newgaming said:

I saw people getting 1200+ on 5ghz

They might have had better RAM than you or overclocked the CPU cache, I wouldn't worry about it unless you're trying to break some records.

[Newgaming]

4 minutes ago, Amaranth said:

Load Line Calibration

 

You want to make sure that your LLC setting is not going to push your vCore over 1.42v for CoffeeLake (although I personally wouldn't go over 1.39v or 1.40v to be on the safe side).

I put level 6

[Amaranth]

1 minute ago, Newgaming said:

I put level 6

Are you on an Asus board? That should be fine but you should double check with HWInfo to see what your CPU is getting under load.

[Newgaming]

2 minutes ago, Amaranth said:

Are you on an Asus board? That should be fine but you should double check with HWInfo to see what your CPU is getting under load.

Ya i am .

Highest 71 C on cinebench 

[Amaranth]

1 minute ago, Newgaming said:

Ya i am .

Highest 71 C on cinebench 

What voltage is it getting?

[Newgaming]

For my cpu current capability should i leave it auto or? 

[Newgaming]

Just now, Amaranth said:

What voltage is it getting?

I forget to look at that , maybe later i take a look at it 

[Cereal5]

21 minutes ago, Amaranth said:

What voltage is it getting?

He said 1.3v in the OP. (also, how tf did you get 5.3 GHz lol)

[Amaranth]

14 minutes ago, Cereal5 said:

He said 1.3v in the OP.

He also didn't know what LLC was, so I'd prefer that he double-check rather than accidentally fry his chip.

 

15 minutes ago, Cereal5 said:

also, how tf did you get 5.3 GHz lol

Mostly luck but I've also delidded the chip, added a custom IHS, and invested in a decent motherboard and RAM.

[Newgaming]

5 hours ago, Amaranth said:

What voltage is it getting?

VCore is 1.297v

When i run cinebench 

[Newgaming]

3 hours ago, Newgaming said:

VCore is 1.297v

When i run cinebench 

 

9 hours ago, Amaranth said:

What voltage is it getting?

Isit okay ?

[Amaranth]

1 hour ago, Newgaming said:

 

Isit okay ?

Yeah, that's good and perfectly safe.

[Newgaming]

4 minutes ago, Amaranth said:

Yeah, that's good and perfectly safe.

Okay there a problem with my computer .

when i press the on button , my pc will on for 1 sec then off for 2-5 sec then on again

[Amaranth]

On 9/19/2018 at 1:47 PM, Newgaming said:

when i press the on button , my pc will on for 1 sec then off for 2-5 sec then on again

Try resetting your BIOS, either by pulling the CMOS battery or by using a BIOS reset switch/jumper.

Your motherboard manual should have instructions for that.