Jump to content

I have an I7-6700K overclocked to 4.7Ghz with a Corsair AIO. I am getting strange temp readouts and it's making my fans go crazy. The CPU is stuck at 33C at idle, but for no reason sometimes the temp jumps to 60C then back to 33C within 2 seconds. Obviously, it's not getting that hot and getting cooler that quickly. So, is this an issue with the temp sensor on the mobo? Also, Corsair Link 4 shows one of my fans running at 27,000RPM. I think that may be a tad too fast, or its incorrect. I don't hear any fan spinning that hard, so what is going on? The rest of the fans are between 970rpm and 1329rpm. More bad sensors?

 

What do you guys think?

Link to comment
https://linustechtips.com/topic/966939-temperature-reading-glitch/
Share on other sites

Link to post
Share on other sites

if the fans were at 27,000rpm the machine would lift off lol.

MSI MAG X670E TOMAHAWK WIFI Motherboard, AMD Ryzen 9 7900X3D Desk-top Processor (12-core/24-thread, 140MB cache, up to 5.6 GHz max boost), CORSAIR VENGEANCE DDR5 RAM 32GB (2x16GB) 6000MHz CL30 AMD EXPO iCUE Compatible Computer Memory, Samsung 990 PRO NVMe M.2 SSD, 2 TB, PCIe 4.0, 7,450 MB/s read, 6,900 MB/s write, Internal SSD, 2 x Seagate BarraCuda 4 TB Internal Hard Drive HDD – 3.5 Inch SATA 6 Gb/s 5400 RPM 256 MB Cache for Computer Desktop PC Laptop (ST4000DM004), MSI MPG A1000G PCIE5 Power Supply Unit, UK Plug - 1000W, 80 Plus Gold Certified, Fully Modular ATX 3.0, PCIe 5.0 GPU, XILENCE XC982 LQ240PRO AIO COOLER, XFX Speedster MERC 310 AMD Radeon RX 7900 XT 20GB 1 x AOC CU34G2XE & 1 x Samsung U32J59XUQ 3840 x 2160 4K, 1 x Samsung Evo 970 Evo Plus NVME PCI-E 1TB, 1 x Samsung Evo 850 250GB, 1 X Sandisk Ultra II SSD 240GB + 2 X 4TB Seagate Barracuda SATA III,  MZHOU 7 Ports PCIe USB 3.0 Card,  2 x UGREEN Hard Drive Enclosure 3.5 inch External SATA Disk Caddy Reader USB 3.0 2.5 3.5 HDD SSD 16TB UASP Case Dock Station With 12V 2A Power Adapter For Windows with 6TB Seagate Barracuda SATA III, Fractal Design Pop XL Case + 4 Fractal Design 140mm Case Fans, Logitech MX Vertical & MX Ergo Trackball Mouse using same USB unifying device, Microsoft Ergonomic Keyboard, Windows 11 Pro x64 Retail, 6TB Seagate USB 3.0 Backup Plus Hub, Blue Yeti Microphone, Logitech C922 Pro HD,  Logitech C920 Pro HD, Bit Defender Total Security 2021.

 

Second PC (Cyclops) - MSI 990FXA Gaming, AMD FX 8370 4Ghz, Corsair 16GB Vengeance Red 9-9-9-24 1600Mhz, Arctic Cooling Freezer 13, Asus Strix 1050TI 4GB, 1 X Acer 27" Full HD Monitor, 1 X Sandisk Ultra II SSD 240GB, 1 x Samsung Evo 850 250GB, 2 X Seagate Barracuda 2TB, 1 X WD Black 2TB, 1 x ASUS 16x DVDRW, X-Case Eagle III Case, 3 X Corsair AF 120 Case Fans, EVGA 850 G2 80+ Gold + PSU, Logitech MX Master Mouse, Corsair K30 Keyboard, Logitech C920 Webcam, R0DE NT1-A Microphone, Scarlet 212 Audio Interface (Revision 2), Windows 10 Pro X64 Retail, Bit Defender Total Security 2021, 2TB Seagate Expansion USB Hard Drive.

 

Third PC (Old Trustie) - Acer Aspire M3400, OEM Mainboard, AMD FX Athlon II X3 425 2.7Ghz, 16GB Corsair Value 1600Mhz Ram, OEM CPU Cooler, AMD R7 260 2GB GPU, 1 X Acer 27" Full HD Monitor, 1 X Sandisk Ultra II SSD 240GB, 2TB Samsung SATA III, 1 X OEM 16X DVDRW, 1 X Acer OEM Case, 1 X Corsair AF120 Case Can, Corsair CX500 Bronze+ CPU, Logitech MX Master Mouse, Corsair K30 Keyboard, Windows 10 Home X64 OEM, Logitech C920 Webcam, Bit Defender Total Security 2021.

 

Printers Include - Canon MG5750, Canon, IP8750,  Canon Pixma Mega tank G5050 & 2 X Samsung Xpress C410W.

 

1 X Zexrow Xbox360 Wired Game Controller.

 

TP Link Archer AX6000 Cable Router Wifi6 with a Virgin Media Hub 4.0 in Modem only mode running 1GB Fibre internet.

 

Samsung Galaxy S21+ 256GB Mobile Phone.

 

Internet Speed.....

https://www.speedtest.net/result/9935039193

Link to post
Share on other sites

are you using any splitters for the fans or even a hub or are each fan plugged directly into a header on the mobo? sometimes when using a splitter it can screw with the rpm readings. as for the temp spike, if this is the same reading in different softwares it may be very well the cpu is spiking due to a background program running. for example, with my Ryzen system and with Ryzen master open, it utilizes the cpu quit a bit and will make temp spike up to 50c then immediately drop back to the 30c idle temp I normally have. 

if you want to change the fan curve so it doesn't make the fans ramp up like that you can look in the bios and you should be able to adjust the curve in there. 

 Current System: MoonLightRyzen

CPU: Ryzen 7 1700x @ 3.9ghz  Board: Asus ROG C6H  Ram: G.Skill TridentZ 32gb 3000mhz  Case: Lian Li PC-O11 Dynamic

GPU: Asus ROG Strix GTX 1070 OC in SLI M.2: Samsung 960 Evo 250gb SSD: Samsung 850 Pro 512gb x2 HDD: Seagate Barracuda 3TB and 2TB

PSU: Corsair RM850x White  Cooler: XSPC/Phanteks Custom Loop 

Backup System: RedDragonV3.0

FX-8350 @ 4.7ghz, Asus TUF Sabertooth 990fx r3.0, MSI GTX 1060 6gb Gaming X, Crucial Balistix Tracer 32gb, M.2 Samsung 960 Evo 250,

Seagate Firecudda 2tb, Seagate Barracuda 2tb, NZXT S340 Elite White, Kraken X62, Corsair RM750x, Hue+

Link to post
Share on other sites

Since I own the same CPU and a Corsair AIO my temperature readings are also unstable especially in idle.It doesn't matter what monitoring software I use Corsair link,AIDA64,Coretemp the temperatures are ''dancing'' like yours do.I get 29-32-41-45-33 in a seconds.I guess that's normal cuz its not only you and me.But can you share your voltage and core speeds and also the exact Corsair AIO cooler?

 

Asus Z170 l 6700k@4.5 l Corsair Vengeance 3200 l Corsair H100i v2 l Corsair RM750x l Asus GTX780 DCU II l Samsung 860 evo 250gb l Seagate 1TB 64mb l Thermaltake View 37 RGB l 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×