Jump to content
8 minutes ago, Spotty said:

A GTX 1070 starts at 400 euro which is their budget. An SSD and 16GB of DDR3 ram would be way over their budget. Would also definitely want to replace the PSU as well if you were powering a GTX 1070 as well which would add to the cost even more. At the point of spending approximately 600 euros you would be better off looking at a platform (CPU/mobo) uprade from AM3+.
OP also only does light gaming, so a GTX 1070 would be overkill for their needs. If they were to buy a dedicated GPU at all and not use integrated graphics or reuse their current card, then a 1050ti (or equivalent used card) should be plenty for their use.

 

The FX 8120 CPU is getting quite old, so even if you did upgrade PSU + SSD + RAM + GPU now, and even if things were great, you would still be looking at upgrading the CPU, motherboard and RAM sometime relatively soon down the line anyway.
Modern budget CPUs will perform much better than your current CPU, and will also be much more efficient using less power and generating less heat.
When you do upgrade the CPU & motherboard, the new platform will be using DDR4 memory. This means any new DDR3 memory you buy for your current system won't be able to be carried over to the new system - you will have to buy all new RAM again - and at the moment RAM prices are quite high.
However, you will be able to carry over things like the SSD, GPU, and PSU to the new system.

 

If you purchase a new system now, with a new motherboard and CPU, you will get the newer platform (AM4) that is planned to be supported for the next few years with new CPUs. You will also be buying DDR4 memory which will be compatible for the next several years. This means that even if you want to ugprade your CPU in a few years time, you may only need to upgrade the CPU, rather than upgrading the Motherboard + CPU + RAM. You will have much more flexibility in upgrading, and you should get longer life out of it as a result.

 


If you're unsure about what you want to do just now in relation to upgrading or building new, or want to save up a bit of extra money before building a new system, I'd recommend getting an SSD now and installing it in your current system.

Adding an SSD to an old build is a quick and cheap way to help it feel more responsive, and will also greatly help with some of those issues you've described such as taking a long time to boot. If/when you do build a new PC, you can just take it out of that machine and plug it in to the new machine.

But, I probably wouldn't recommend buying things such as DDR3 RAM for your current system if you are considering building new soon, as you won't be able to use it in the new system and any money you spend on it now will be effectively wasted when you upgrade.

Wow! 

You summed it up really fair!

Thanks, i think I'll follow your tip upgrade a SSD and see how it goes from there, maybe focysing first on the PSU and then towards a new build

Link to post
Share on other sites

1 minute ago, Denam89 said:

Thanks, i think I'll follow your tip upgrade a SSD and see how it goes from there, maybe focysing first on the PSU and then towards a new build

PSU would be a good thing to replace as well, and you will be able to transfer that over to any new system you build.
For your current system (8120 + HD6870), a decent 450W PSU will be enough assuming you don't have any crazy overclocks on your CPU.

As GoldenLag and Taf The Ghost have suggested in their build suggestions for you earlier, a Seasonic Focus Plus Gold 550W would be a really good unit and you should be able to find them for around 65 euros. It should also be suitable for any upgrade or new system you are looking at building.
https://de.pcpartpicker.com/product/bkp323/seasonic-focus-plus-gold-550w-80-gold-certified-fully-modular-atx-power-supply-ssr-550fx

 

If you can't find that for a good price, also look for the BeQuiet Pure Power 10 500W (either the non modular or semi modular "CM" models).
https://de.pcpartpicker.com/product/LxKhP6/be-quiet-pure-power-10-cm-500w-80-silver-certified-semi-modular-atx-power-supply-bn277

CPU: Intel i7 6700k  | Motherboard: Gigabyte Z170x Gaming 5 | RAM: 2x16GB 3000MHz Corsair Vengeance LPX | GPU: Gigabyte Aorus GTX 1080ti | PSU: Corsair RM750x (2018) | Case: BeQuiet SilentBase 800 | Cooler: Arctic Freezer 34 eSports | SSD: Samsung 970 Evo 500GB + Samsung 840 500GB + Crucial MX500 2TB | Monitor: Acer Predator XB271HU + Samsung BX2450

Link to post
Share on other sites

23 minutes ago, Spotty said:

PSU would be a good thing to replace as well, and you will be able to transfer that over to any new system you build.
For your current system (8120 + HD6870), a decent 450W PSU will be enough assuming you don't have any crazy overclocks on your CPU.

As GoldenLag and Taf The Ghost have suggested in their build suggestions for you earlier, a Seasonic Focus Plus Gold 550W would be a really good unit and you should be able to find them for around 65 euros. It should also be suitable for any upgrade or new system you are looking at building.
https://de.pcpartpicker.com/product/bkp323/seasonic-focus-plus-gold-550w-80-gold-certified-fully-modular-atx-power-supply-ssr-550fx

 

If you can't find that for a good price, also look for the BeQuiet Pure Power 10 500W (either the non modular or semi modular "CM" models).
https://de.pcpartpicker.com/product/LxKhP6/be-quiet-pure-power-10-cm-500w-80-silver-certified-semi-modular-atx-power-supply-bn277

That PSU should actually be fine for the OP's needs. However investing into a CXM PSU would be a wise choice if the OP values cable management.

There are 10 types of people in this world. Those that understand binary and those that don't.

Current Rig (Dominator II): 8GB Corsair Vengeance LPX DDR4 3133 C15, AMD Ryzen 3 1200 at 4GHz, Coolermaster MasterLiquid Lite 120, ASRock B450M Pro4, AMD R9 280X, 120GB TCSunBow SSD, 3TB Seagate ST3000DM001-9YN166 HSD, Corsair CX750M Grey Label, Windows 10 Pro, 2x CoolerMaster MasterFan Pro 120, Thermaltake Versa H18 Tempered Glass.

 

Previous Rig (Black Magic): 8GB DDR3 1600, AMD FX6300 OC'd to 4.5GHz, Zalman CNPS5X Performa, Asus M5A78L-M PLUS /USB3, GTX 950 SC (former, it blew my PCIe lane so now on mobo graphics which is Radeon HD 3000 Series), 1TB Samsung Spinpoint F3 7200RPM HDD, 3TB Seagate ST3000DM001-9YN166 HDD (secondary), Corsair CX750M, Windows 8.1 Pro, 2x 120mm Red LED fans, Deepcool SMARTER case

 

My secondary rig (The Oldie): 4GB DDR2 800, Intel Core 2 Duo E8400 @ 3GHz, Stock Dell Cooler, Foxconn 0RY007, AMD Radeon HD 5450, 250GB Samsung Spinpoint 7200RPM HDD, Antec HCG 400M 400W Semi Modular PSU, Windows 8.1 Pro, 80mm Cooler Master fan, Dell Inspiron 530 Case modded for better cable management. UPDATE: SPECS UPGRADED DUE TO CASEMOD, 8GB DDR2 800, AMD Phenom X4 9650, Zalman CNPS5X Performa, Biostar GF8200C M2+, AMD Radeon HD 7450 GDDR5 edition, Samsung Spinpoint 250GB 7200RPM HDD, Antec HCG 400M 400W Semi Modular PSU, Windows 8.1 Pro, 80mm Cooler Master fan, Dell Inspiron 530 Case modded for better cable management and support for non Dell boards.

 

Retired/Dead Rigs: The OG (retired) (First ever PC I used at 3 years old back in 2005) Current Specs: 2GB DDR2, Pentium M 770 @ 2.13GHz, 60GB IDE laptop HDD, ZorinOS 12 Ultimate x86. Originally 512mb DDR2, Pentium M 740 @ 1.73GHzm 60GB IDE laptop HDD and single boot XP Pro. The Craptop (dead), 2gb DDR3, Celeron n2840 @ 2.1GHz, 50GB eMMC chip, Windows 10 Pro. Nightrider (dead and cannibalized for Dominator II): Ryzen 3 1200, Gigabyte A320M HD2, 8GB DDR4, XFX Ghost Core Radeon HD 7770, 1TB Samsung Spinpoint F3 (2010), 3TB Seagate Barracuda, Corsair CX750M Green, Deepcool SMARTER, Windows 10 Home.

Link to post
Share on other sites

On 23/08/2018 at 11:24 PM, Spotty said:

PSU would be a good thing to replace as well, and you will be able to transfer that over to any new system you build.
For your current system (8120 + HD6870), a decent 450W PSU will be enough assuming you don't have any crazy overclocks on your CPU.

As GoldenLag and Taf The Ghost have suggested in their build suggestions for you earlier, a Seasonic Focus Plus Gold 550W would be a really good unit and you should be able to find them for around 65 euros. It should also be suitable for any upgrade or new system you are looking at building.
https://de.pcpartpicker.com/product/bkp323/seasonic-focus-plus-gold-550w-80-gold-certified-fully-modular-atx-power-supply-ssr-550fx

 

If you can't find that for a good price, also look for the BeQuiet Pure Power 10 500W (either the non modular or semi modular "CM" models).
https://de.pcpartpicker.com/product/LxKhP6/be-quiet-pure-power-10-cm-500w-80-silver-certified-semi-modular-atx-power-supply-bn277

Yeah, that sounds like a great idea.

I'll do that. I am not familiar with overclocking and etc., but it would be nice to try twerk my system a little bit, you know? maybe this change in configuration could help improve it's performance, idk.

On 23/08/2018 at 11:50 PM, xriqn said:

That PSU should actually be fine for the OP's needs. However investing into a CXM PSU would be a wise choice if the OP values cable management.

hmmm, actually my current PSU is really messy in terms of cable management. Looking at the pics seems tidier a modular one.

Link to post
Share on other sites

On 23/08/2018 at 10:17 PM, Spotty said:

There are ways to measure your CPU temperatures using software. Programs such as HWinfo64, CoreTemp, Aida64 (trial version), and plenty others. You just need to download and install it, open it up and it will show you your CPU temperatures.

 

Which emulator are you running and we can possibly find out what hardware/specifications it requires to run.

I downloaded the HWinfo64 and I got so much information that idk where to start.

Which would be a good temp level? There's sensors on everything ...

Link to post
Share on other sites

1 hour ago, Denam89 said:

Yeah, that sounds like a great idea.

I'll do that. I am not familiar with overclocking and etc., but it would be nice to try twerk my system a little bit, you know? maybe this change in configuration could help improve it's performance, idk.

hmmm, actually my current PSU is really messy in terms of cable management. Looking at the pics seems tidier a modular one.

Here's some pics of my system with a semi modular in it (CX750M):

 

Spoiler

39311289_534328193672174_6242992138787749888_n.thumb.jpg.022405f2e009314841b4443229af7de9.jpg

 

Spoiler

5b81e0571b407_39388104_367160830489591_3429858018118860800_n(1)_v4.jpg.03689773322f131830e987cfe6e5948c.jpg

 

 

There are 10 types of people in this world. Those that understand binary and those that don't.

Current Rig (Dominator II): 8GB Corsair Vengeance LPX DDR4 3133 C15, AMD Ryzen 3 1200 at 4GHz, Coolermaster MasterLiquid Lite 120, ASRock B450M Pro4, AMD R9 280X, 120GB TCSunBow SSD, 3TB Seagate ST3000DM001-9YN166 HSD, Corsair CX750M Grey Label, Windows 10 Pro, 2x CoolerMaster MasterFan Pro 120, Thermaltake Versa H18 Tempered Glass.

 

Previous Rig (Black Magic): 8GB DDR3 1600, AMD FX6300 OC'd to 4.5GHz, Zalman CNPS5X Performa, Asus M5A78L-M PLUS /USB3, GTX 950 SC (former, it blew my PCIe lane so now on mobo graphics which is Radeon HD 3000 Series), 1TB Samsung Spinpoint F3 7200RPM HDD, 3TB Seagate ST3000DM001-9YN166 HDD (secondary), Corsair CX750M, Windows 8.1 Pro, 2x 120mm Red LED fans, Deepcool SMARTER case

 

My secondary rig (The Oldie): 4GB DDR2 800, Intel Core 2 Duo E8400 @ 3GHz, Stock Dell Cooler, Foxconn 0RY007, AMD Radeon HD 5450, 250GB Samsung Spinpoint 7200RPM HDD, Antec HCG 400M 400W Semi Modular PSU, Windows 8.1 Pro, 80mm Cooler Master fan, Dell Inspiron 530 Case modded for better cable management. UPDATE: SPECS UPGRADED DUE TO CASEMOD, 8GB DDR2 800, AMD Phenom X4 9650, Zalman CNPS5X Performa, Biostar GF8200C M2+, AMD Radeon HD 7450 GDDR5 edition, Samsung Spinpoint 250GB 7200RPM HDD, Antec HCG 400M 400W Semi Modular PSU, Windows 8.1 Pro, 80mm Cooler Master fan, Dell Inspiron 530 Case modded for better cable management and support for non Dell boards.

 

Retired/Dead Rigs: The OG (retired) (First ever PC I used at 3 years old back in 2005) Current Specs: 2GB DDR2, Pentium M 770 @ 2.13GHz, 60GB IDE laptop HDD, ZorinOS 12 Ultimate x86. Originally 512mb DDR2, Pentium M 740 @ 1.73GHzm 60GB IDE laptop HDD and single boot XP Pro. The Craptop (dead), 2gb DDR3, Celeron n2840 @ 2.1GHz, 50GB eMMC chip, Windows 10 Pro. Nightrider (dead and cannibalized for Dominator II): Ryzen 3 1200, Gigabyte A320M HD2, 8GB DDR4, XFX Ghost Core Radeon HD 7770, 1TB Samsung Spinpoint F3 (2010), 3TB Seagate Barracuda, Corsair CX750M Green, Deepcool SMARTER, Windows 10 Home.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×