Jump to content

Push Pull fan types

Alynoser
 Share
Go to solution Solved by ReHWolution,

Go with identical fans on both sides. Airflow fans are for CASE only. With any resistance applied they suck very hard.

Posted

I'd stick with pressure fans for both push and pull, because it's easier to control fan speed that way. Airflow fans often spin much faster and get loud earlier as a result.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/957399-push-pull-fan-types/#findComment-11620951
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, Alynoser said:

I am doing a push pull on my radiator but I had a question. Should I just use high static pressure fans for push and pull or high static for pull and air flow for push?

if your radiator isn't too T H I C C, it doesn't matter. But if it's thick, then use high static for push

RGB & Fan control ULTIMATE GUIDE !

 

Link to comment
https://linustechtips.com/topic/957399-push-pull-fan-types/#findComment-11620952
Share on other sites
Link to post
Share on other sites
Posted
29 minutes ago, ReHWolution said:

Go with identical fans on both sides. Airflow fans are for CASE only. With any resistance applied they suck very hard.

''Airflow fans are for CASE only''

just no..

 

it's fine to run airflow fans on radiators, i've done it for years and it's 100% fine, will they outperform a static optimized fan? of course not but saying they're for case only is just wrong

Specs: Ryzen 9800X3D 5425MHz - ASUS TUF RTX 4080 super - G.Skill Trident Z5 Neo 64GB 6400MT/s CL26 -  Gigabyte X870 AORUS Elite Wifi7 ICE - Torrent Fractal Design white - EVGA 850W Supernova G2 80+ Gold - Noctua NH-U12A

Link to comment
https://linustechtips.com/topic/957399-push-pull-fan-types/#findComment-11621069
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Custom Loop and Exotic Cooling

×