MYSTERY COMPUTER ISSUE

[Jug1212]

I was building a pc today for fun and I finished but now my the monitors won’t detect my pc. I tried different monitors and different graphics cards. I can’t figure it out. I keep getting these error codes. Please help

816C38B1-4B06-40A9-BBB7-77D6AEEBF728.MOV

[Windows7ge]

Those aren't error codes. Those are POST codes. They run everytime the system starts. It seems to stop at 4C & start over indicating it's boot looping. Go into the motherboards manual. What is POST code 4C?

[Uncle Pockets]

did you plug them into the GPU and not the moterboard? 

[Jug1212]

4 minutes ago, Windows7ge said:

Those aren't error codes. Those are POST codes. They run everytime the system starts. It seems to stop at 4C & start over indicating it's boot looping. Go into the motherboards manual. What is POST code 4C?

It says post code 3F~4F are “reserved”

[.Apex.]

@Jug1212
try removing all RAM sticks and leaving only one, and try again.

[.Apex.]

if its still the same thing then it's most likely a CPU issue, either not seated properly, or there's bent pins on the socket.

[.Apex.]

all of the post codes shown are Reserved, so it has to be the CPU.

[Jug1212]

14 hours ago, syn2112 said:

all of the post codes shown are Reserved, so it has to be the CPU.

I tried taking the CPU out and putting it back in. I checked to see if any pins were bent but they aren’t..... I can’t figure out the problem

[O9B0666]

Just had a issue with a similar board gaming 7....my mobos lights wouldn't even come on though.... Called gigabyte last night and they're rma ING it. 

https://drive.google.com/file/d/1MdQzmuidRYDLfSC3QD0atfkeAsSz8aNQ/view?usp=drivesdk