Jump to content

Cpu overheating

Shiny_Gliscor
 Share
Posted

I recently finished my first waterloop and cleaned it completely with Mayhems blitz 1 and 2. Now after flushing it out and trying too boot the system the cpu reaches over 90 degrees after about 30 secs to a minute in bios. Does anyone know why that could be?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
6 minutes ago, Shiny_Gliscor said:

I recently finished my first waterloop and cleaned it completely with Mayhems blitz 1 and 2. Now after flushing it out and trying too boot the system the cpu reaches over 90 degrees after about 30 secs to a minute in bios. Does anyone know why that could be?

Did you put fresh thermal paste?

Is the pump working?

I edit my posts a lot, Twitter is @LordStreetguru just don't ask PC questions there mostly...
 

Spoiler

 

What is your budget/country for your new PC?

 

what monitor resolution/refresh rate?

 

What games or other software do you need to run?

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
2 minutes ago, Streetguru said:

Did you put fresh thermal paste?

Is the pump working?

Yes I applied an entire tube of  .5 grams of kryonaut before putting the block on and i can here the pump humming.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
20 minutes ago, Shiny_Gliscor said:

Yes I applied an entire tube of  .5 grams of kryonaut before putting the block on and i can here the pump humming.

Then maybe the fins on the cold plate are screwed and not transferring heat very well?

Or the Temp Sensor is busted.

 

What happens when you try to run Prime95 or something?

I edit my posts a lot, Twitter is @LordStreetguru just don't ask PC questions there mostly...
 

Spoiler

 

What is your budget/country for your new PC?

 

what monitor resolution/refresh rate?

 

What games or other software do you need to run?

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
7 hours ago, Streetguru said:

Then maybe the fins on the cold plate are screwed and not transferring heat very well?

Or the Temp Sensor is busted.

 

What happens when you try to run Prime95 or something?

The block is new and I can't run prime bcuz it shuts down immediately after booting into windows.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
47 minutes ago, Shiny_Gliscor said:

The block is new and I can't run prime bcuz it shuts down immediately after booting into windows.

Did you take the sticker off the block if there was one? If the pump is running and there's thermal paste there shouldn't be any issues.

I edit my posts a lot, Twitter is @LordStreetguru just don't ask PC questions there mostly...
 

Spoiler

 

What is your budget/country for your new PC?

 

what monitor resolution/refresh rate?

 

What games or other software do you need to run?

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
4 hours ago, Shiny_Gliscor said:

The block is new and I can't run prime bcuz it shuts down immediately after booting into windows.

Pictures of your system and more information about parts will be helpful.

Recent builds:  Meshify C (Zero Tolerance!) & View 37 (Breathable Quad 2080Ti + 2990WX)

Best documented PC coolants

Older Builds

Spoiler

Full-custom loop builds: Meshify C (Full custom loop SLI), Ncase M1(8700K + 1080Ti Full custom loop)  Obsidian 900D (1950X + Quad 1080Ti) & Fractal Define C (1080 in SLI)

Air-cooled builds Air 740D (1920X + Quad 980Ti) & Fractal Define C (Version Air!)

 

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Custom Loop and Exotic Cooling

×