Reasonable parts?

[MikkoP]

I was putting together this kind of beast. 

 

CPU:  Intel Core i7-4770K 3.5GHz Quad-Core Processor  ($293.33 @ Amazon) 

CPU Cooler:  Noctua NH-D14 65.0 CFM CPU Cooler  ($77.90 @ Amazon) 

Motherboard:  Asus MAXIMUS VI IMPACT Mini ITX LGA1150 Motherboard  ($223.98 @ SuperBiiz) 

Memory:  Kingston Black 16GB (2 x 8GB) DDR3-1600 Memory  ($139.99 @ Amazon) 

Storage:  Samsung 840 EVO 500GB 2.5" Solid State Disk  ($301.99 @ Amazon) 

Storage:  Seagate Barracuda 2TB 3.5" 7200RPM Internal Hard Drive  ($88.98 @ OutletPC) 

Video Card:  XFX Radeon R9 290 4GB Video Card  ($505.98 @ SuperBiiz) 

Case:  BitFenix Prodigy (Orange) Mini ITX Tower Case  ($74.75 @ OutletPC) 

Power Supply:  Corsair 760W 80+ Platinum Certified Fully-Modular ATX Power Supply  ($182.98 @ Amazon) 

Total: $1889.88

 

Does everything fit together and is there something I could change for better performance and/or cheaper price? That's still almost 700 $ cheaper than in Finland.

[Excon]

NH-D14 is definitely not going to fit in the prodigy. Go with an H80i, I don't normally suggest them but it's better here. That PSU also won't fit and I also don't suggest that GPU in the Prodigy.

[Thecrazyswede]

NH-D14 is definitely not going to fit in the prodigy. Get a BeQuiet! Dark Rock 2

 

Unsure if that will clear the top fans if OP wants those.

[Lord Pantaloons]

PSU is overkill for a single GPU system

[Excon]

Unsure if that will clear the top fans if OP wants those.

True. H60 might be simpler.

[Thecrazyswede]

True. H60 might be simpler.

 

Without a shadow of doubt i agree.

[Thecrazyswede]

PSU is overkill for a single GPU system

 

This is one thing you can change around OP, 500-600w will still be on the top end for this build.

[JoshM]

True. H60 might be simpler.

Instead of a H60 would a H80i fit cause H60's are quite average 

[Excon]

Instead of a H60 would a H80i fit cause H60's are quite average 

Getting rather close, I forgot about the riser board on the Impact, this built is going to have some tight clearances.

[Excon]

Instead of a H60 would a H80i fit cause H60's are quite average 

Just looked it up, H80i will fit if the rear top fan is removed. So yea H80i would be better.

[Thecrazyswede]

I would suggest getting a 230mm in the front or dual 120's to increase the airflow to that 290.

[lufihengr]

Are you buying it from the US? Have you thought about tax and import duties?

[WoodenMarker]

NH-D14 is definitely not going to fit in the prodigy. Go with an H80i, I don't normally suggest them but it's better here. That PSU also won't fit and I also don't suggest that GPU in the Prodigy.

It fits perfectly fine...

 

The psu fits just fine. It'd just be a waste of a psu with such a high wattage for an itx build.

 

@MikkoP What's the system being used for?