How do I screw in my gpu?

[Thmyrke]

So. I’m building, and I’m putting my gpu in. And a can’t seem to find how to screw in my gpu. Help?

[Thmyrke]

[JoostinOnline]

Push it up a little bit so the screw holes align. The weight of a graphics card can make it bend downward.

[dcgreen2k]

Put screws (They should have come with the case) in the holes from the second picture. You might have to shift the graphics card to get them to fit though.

[Thmyrke]

1 minute ago, JoostinOnline said:

Push it up a little bit so the screw holes align. The weight of a graphics card can make it bend downward.

 

Just now, thegreengamers said:

Put screws (They should have come with the case) in the holes from the second picture. You might have to shift the graphics card to get them to fit though.

That’s what I thought! But it just spins forever...

[dcgreen2k]

1 minute ago, Thmyrke said:

 

That’s what I thought! But it just spins forever...

Then you might be using the wrong screws, or the screw isn't aligned properly.

[NelizMastr]

1 minute ago, Thmyrke said:

 

That’s what I thought! But it just spins forever...

Then you're using the wrong screws. You need coarse threaded screws, the same kind that you used on the power supply.

[JoostinOnline]

This part is concerning me. Is part of the bracket sticking out? It should all be inside the case.

[Thmyrke]

Just now, thegreengamers said:

Then you might be using the wrong screws, or the screw isn't aligned properly.

 

Just now, thegreengamers said:

Then you might be using the wrong screws, or the screw isn't aligned properly.

Wrong screws? The case just came with one bag of em.

[Thmyrke]

1 minute ago, JoostinOnline said:

This part is concerning me. Is part of the bracket sticking out? It should all be inside the case.

That’s the dvi port.

[Thmyrke]

3 minutes ago, NelizMastr said:

Then you're using the wrong screws. You need coarse threaded screws, the same kind that you used on the power supply.

Thank you!,!

[Thmyrke]

5 minutes ago, NelizMastr said:

Then you're using the wrong screws. You need coarse threaded screws, the same kind that you used on the power supply.

Wait, no. That didn’t work.

[ZyrtX]

As other have said before me, you are probably using the wrong screws. Look into the case's manual and it will tell you which of the included screws should be used here.

[JoostinOnline]

8 minutes ago, Thmyrke said:

That’s the dvi port.

Ah, I was on my phone and the small screen made it difficult.  Now that I'm on my computer it's obvious, but the bottom screw hole looked like part of the brace.

[Thmyrke]

Just now, JoostinOnline said:

Ah, I was on my phone and the small screen made it difficult.  Now that I'm on my computer it's obvious, but the bottom screw hole looked like part of the brace.

No problem

[Thmyrke]

4 minutes ago, ZyrtX said:

As other have said before me, you are probably using the wrong screws. Look into the case's manual and it will tell you which of the included screws should be used here.

It worked on one  hole but not the other. It’ll do. There’s not much sag now.

[PEagle]

Try the screws on an empty slot, if they work here, try them on the part where there is the GPU (without the GPU if you want to make it easy).

 

One of the screw thread may have been damaged and the screw not screwing in.