Exhaust Fans

[komo1006]

Hello Guys,

 

I am sure this was mentioned somewhere but i just can't find it.

 

I have the EKWB P360 Kit with push/pull config using high static pressure EKWB Vardar F3 fans, Now I am looking for some decent 3 exhaust fans, and because i am a big fan of EKWB i was thinking of the Vardar F4, i know that the Vardar F4 is a high static pressure fan meaning that it is not optimized to work as an exhaust but when i look at the numbers is has a CFM of 77 and static pressure of 3.16 which surpasses some other high airflow fans like the Corsair AF120, and much cheaper too!

 

So the question, will the EKWB Vardar High Static Pressure F4 Fans (3 of them, 2 upper side of the case and 1 rear) act as a good exhaust fans giving my above mentioned intake? (The case is Corsair 500D if it makes any difference)

 

Thanks a lot folks

[Dschijn]

go for it

[Christophe Corazza]

They will act as very good exhaust fans, I’m quite sure of that. So if you really want all of your cooling components to be from EKWB, then you could indeed use those fans.

[airdeano]

one thing to consider are those 'stats' are at 12v. so is gunna be loud at 12v.

[Christophe Corazza]

1 minute ago, airdeano said:

one thing to consider are those 'stats' are at 12v. so is gunna be loud at 12v.

 

Then it will be headphones for OP I guess... ;-)

[komo1006]

1 minute ago, airdeano said:

one thing to consider are those 'stats' are at 12v. so is gunna be loud at 12v.

yap loudness is not really an issue in my case at least, but other than that what do you think of those?