Jump to content

Temperature and Memory

bebejapes
 Share
Go to solution Solved by Jurrunio,
9 minutes ago, bebejapes said:

well ill do a soft reset my mobo and bios allows for soft reset through settings.

 

So when i do this it it will send my ram speed to the new stock which is 2400mhz

soft reset dont always work.

 

it should

Posted

Hi Guys,

 

quick question.

 

i was previously using the artic silver thermal paste on my ryzen 3 1200 which also was using 8gb hyperx with 2133mhz and a mushkin 2400mhz 8gb.

 

So this weekend i did a weekly clean up of my gaming rig and re pasted with thermal grizly kryonaut and switched the hyperx out for a similar mushkin 2400mhz 8gb.

 

So back to the question is it normal to have an idle temp of 30c under loaf it goes up to at least 40 and for some dumb reason my fortnite game crashes with saying system ram error.

 

I didnt change my ram timing in my bios and was still running at 2133mhz.

 

But besides that everything is running fine.

Link to comment
https://linustechtips.com/topic/928459-temperature-and-memory/
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 minute ago, kb5zue said:

So, the memory is mismatched.  Is any of the memory on the QVL for the mobo?  Maybe these things are contributing to the problem.  Just sayin........

the memory was previously mis matched so i set it to the lowest speed of both ram which was 2133mhz instead of the 2400mhz.

 

After the weekly cleaning ive made bboth modules match by swapping out the mis matched one.

 

but i didnt change the timing speed on the bios to 2400 yet.

Link to comment
https://linustechtips.com/topic/928459-temperature-and-memory/#findComment-11357087
Share on other sites
Link to post
Share on other sites
Posted

Try reset the BIOS through reset CMOS. The easiest way to do so is to remove the CMOS battery and leave the system alone for a minute.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/928459-temperature-and-memory/#findComment-11357092
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 minute ago, Jurrunio said:

Try reset the BIOS through reset CMOS. The easiest way to do so is to remove the CMOS battery and leave the system alone for a minute.

well ill do a soft reset my mobo and bios allows for soft reset through settings.

 

So when i do this it it will send my ram speed to the new stock which is 2400mhz

Link to comment
https://linustechtips.com/topic/928459-temperature-and-memory/#findComment-11357096
Share on other sites
Link to post
Share on other sites
Posted
  • Solution
9 minutes ago, bebejapes said:

well ill do a soft reset my mobo and bios allows for soft reset through settings.

 

So when i do this it it will send my ram speed to the new stock which is 2400mhz

soft reset dont always work.

 

it should

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/928459-temperature-and-memory/#findComment-11357109
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×