Jump to content

DIY LIFI

Go to solution Solved by Mira Yurizaki,

The theory isn't that hard, you blink a light to represent the bits. So in a simple case, you would have a light on one end and a photo detector on another.

 

The problem is you can't use a light source that's in the visible spectrum unless it's a very narrow wavelength and of much higher intensity than what you'd expect the natural environment to be. Then the limiting factor would be how quickly the light source can ramp up or change intensity.

 

Or you can just modify existing technology like a higher powered IrDA or something.

Ethernet would probably still be faster AFAIK

PSU Nerd | PC Parts Flipper | Cable Management Guru

Helpful Links: PSU Tier List | Why not group reg? | Avoid the EVGA G3

Helios EVO (Main Desktop) Intel Core™ i9-10900KF | 32GB DDR4-3000 | GIGABYTE Z590 AORUS ELITE | GeForce RTX 3060 Ti | NZXT H510 | EVGA G5 650W

 

Delta (Laptop) | Galaxy S21 Ultra | Pacific Spirit XT (Server)

Full Specs

Spoiler

 

Helios EVO (Main):

Intel Core™ i9-10900KF | 32GB G.Skill Ripjaws V / Team T-Force DDR4-3000 | GIGABYTE Z590 AORUS ELITE | MSI GAMING X GeForce RTX 3060 Ti 8GB GPU | NZXT H510 | EVGA G5 650W | MasterLiquid ML240L | 2x 2TB HDD | 256GB SX6000 Pro SSD | 3x Corsair SP120 RGB | Fractal Design Venturi HF-14

 

Pacific Spirit XT - Server

Intel Core™ i7-8700K (Won at LTX, signed by Dennis) | GIGABYTE Z370 AORUS GAMING 5 | 16GB Team Vulcan DDR4-3000 | Intel UrfpsgonHD 630 | Define C TG | Corsair CX450M

 

Delta - Laptop

ASUS TUF Dash F15 - Intel Core™ i7-11370H | 16GB DDR4 | RTX 3060 | 500GB NVMe SSD | 200W Brick | 65W USB-PD Charger

 


 

Intel is bringing DDR4 to the mainstream with the Intel® Core™ i5 6600K and i7 6700K processors. Learn more by clicking the link in the description below.

Link to comment
https://linustechtips.com/topic/902632-diy-lifi/#findComment-11106982
Share on other sites

Link to post
Share on other sites

The theory isn't that hard, you blink a light to represent the bits. So in a simple case, you would have a light on one end and a photo detector on another.

 

The problem is you can't use a light source that's in the visible spectrum unless it's a very narrow wavelength and of much higher intensity than what you'd expect the natural environment to be. Then the limiting factor would be how quickly the light source can ramp up or change intensity.

 

Or you can just modify existing technology like a higher powered IrDA or something.

Link to comment
https://linustechtips.com/topic/902632-diy-lifi/#findComment-11107044
Share on other sites

Link to post
Share on other sites

Yeah... Not realistically gonna happen.

LI-FI doesn't even work well in controlled lab environments with expert scientists. no way it'll work in your home.

It'd literally be easier to carry an Ethernet>USB-C dongle and hang Ethernet cables from the ceiling 6 inches apart throughout your entire house to use with your phone.

QUOTE/TAG ME WHEN REPLYING

Spend As Much Time Writing Your Question As You Want Me To Spend Responding To It.

If I'm wrong, please point it out. I'm always learning & I won't bite.

 

Laptop:

Lenovo Yoga 7 Air: Ryzen 7840S, 32GiB DDR5

 

Desktop (Old but I never replaced it):

Delidded Core i7 4770K - GTX 1070 ROG Strix - 16GB DDR3 @2000Mhz

Link to comment
https://linustechtips.com/topic/902632-diy-lifi/#findComment-11107058
Share on other sites

Link to post
Share on other sites

7 hours ago, M.Yurizaki said:

The theory isn't that hard, you blink a light to represent the bits. So in a simple case, you would have a light on one end and a photo detector on another.

 

The problem is you can't use a light source that's in the visible spectrum unless it's a very narrow wavelength and of much higher intensity than what you'd expect the natural environment to be. Then the limiting factor would be how quickly the light source can ramp up or change intensity.

 

Or you can just modify existing technology like a higher powered IrDA or something.

Or in other words....fiber...

Link to comment
https://linustechtips.com/topic/902632-diy-lifi/#findComment-11107671
Share on other sites

Link to post
Share on other sites

The trouble with Li-Fi itself is it probably wants to be omnidirectional. But that kind of doesn't work if you have a roomful array of LEDs flashing unless they were all flashing at exactly the same time. Then there's the receiver part. But otherwise, Li-Fi is just Wi-Fi using the visible spectrum instead of RF.

 

But aside from that, high speed free space optical communication isn't a pipe dream. The visible spectrum just as its limitations and quirks you need to be aware of.

Link to comment
https://linustechtips.com/topic/902632-diy-lifi/#findComment-11108128
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×