My PC Build Could't Boot

[Kagery]

I want to ask whether Premier Adata memory and Team Elite Plus memory support on asrock motherboard series Fatal1ty ab350 Gaming k4 ?

Asrock motherboard that I use now bios not updated

My Processor is AMD Ryzen5 1600

 

Memory Details

1. Team Elite Plus DDR4 8Gb 2666mhz (Single)  

     Module TPD48G2666HC19BK

 

2. Premier Adata DDR4 8Gb 2400mhz (Single)

     Module AD4U240038G17-B

 

 

all the memory I mentioned above I have tried one by one and also have changed replace the memory slot but when I turn it on the screen just bring up the words "No Signal" also keyboard and mouse can not turn on or light up

 

The Graphic Card I use is the GTX 1050ti

and the PSU that I use is FSP Hexa plus ll 500w meet 80+

 

 

I turn it on The whole fan can run normally from the Ryzen Stock Cooler fan, VGA fan, PSU fan and also Fan Case

 

in my case is there any broken part?

or just my Moteherboard that can not read the memory because my moteherboard BIOS has not been updated

[Energycore]

10 minutes ago, Kagery said:

and the PSU that I use is FSP Hexa plus ll 500w

Before you do anything, switch your PSU to something that isn't a hazard to your hardware.

10 minutes ago, Kagery said:

all the memory I mentioned above I have tried one by one and also have changed replace the memory slot but when I turn it on the screen just bring up the words "No Signal" also keyboard and mouse can not turn on or light up

If it doesn't even turn on, then RAM is not the issue. The ony situation where a motherboard doesn't turn on at all is no CPU. Do the fans spin? Does the motherboard turn off, then on, in cycles?

12 minutes ago, Kagery said:

Memory Details

1. Team Elite Plus DDR4 8Gb 2666mhz (Single)  

     Module TPD48G2666HC19BK

 

2. Premier Adata DDR4 8Gb 2400mhz (Single)

     Module AD4U240038G17-B

 

The thing is, these should work, I feel like these aren't the problem.

[Kagery]

yes sir 

 

before i start unplugging or installing the memory i will definitely first unplug the psu from the power source

 

 

in my case this all fan can rotate from Ryzen stock cooler fan, graphics card fan, psu fan and until case fan everything can spin or activate

 

but the mouse and keyboard can not be lit.

on the monitor appears no signal

I use HDMI to HDMI cable  from Graphic Card to monitor

[Kagery]

14 hours ago, Energycore said:

Before you do anything, switch your PSU to something that isn't a hazard to your hardware.

If it doesn't even turn on, then RAM is not the issue. The ony situation where a motherboard doesn't turn on at all is no CPU. Do the fans spin? Does the motherboard turn off, then on, in cycles?

The thing is, these should work, I feel like these aren't the problem.

yes sir 

 

before i start unplugging or installing the memory i will definitely first unplug the psu from the power source

 

 

in my case this all fan can rotate from Ryzen stock cooler fan, graphics card fan, psu fan and until case fan everything can spin or activate

 

but the mouse and keyboard can not be lit.

on the monitor appears no signal

I use HDMI to HDMI cable  from Graphic Card to monitor