Jump to content

Tecware Edge TG Radiator Support?

MultiMigo
By MultiMigo
in Power Supplies
 Share
Go to solution Solved by TVwazhere,
7 hours ago, MultiMigo said:

Do you think it can support a Corsair H105? 

 

Here's the link 

https://www.tecware.co/edgetg

 

It says it supports 240mm Radiators... But others said that the H105 is quite thick.

The H105 is indeed quite thick for a RAD; 38mm compared to standard 25mm (1.5" compared to 1") nowhere does it list the thickest rad you could put there but it looks like might be able to squeeze it in there... It will be tight though! It'd not a guarantee though, so if you can find an h110i that would be better.

 

RAD support is not listed for the top, so unless you plan to mod it, it most likely cannot fit a rad at the top, due to either fan mount positioning, motherboard VRM's, RAM modules or a combination of the three.

Posted
  • Author
4 minutes ago, wonderforest said:

Yeah no problem, will fit top or front.

Thank you!

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Solution
7 hours ago, MultiMigo said:

Do you think it can support a Corsair H105? 

 

Here's the link 

https://www.tecware.co/edgetg

 

It says it supports 240mm Radiators... But others said that the H105 is quite thick.

The H105 is indeed quite thick for a RAD; 38mm compared to standard 25mm (1.5" compared to 1") nowhere does it list the thickest rad you could put there but it looks like might be able to squeeze it in there... It will be tight though! It'd not a guarantee though, so if you can find an h110i that would be better.

 

RAD support is not listed for the top, so unless you plan to mod it, it most likely cannot fit a rad at the top, due to either fan mount positioning, motherboard VRM's, RAM modules or a combination of the three.

"Put as much effort into your question as you'd expect someone to give in an answer"- @Princess Luna

Make sure to Quote posts or tag the person with @[username] so they know you responded to them!

 RGB Build Post 2019 --- Rainbow 🦆 2020 --- Velka 5 V2.0 Build 2021

Purple Build Post ---  Blue Build Post --- Blue Build Post 2018 --- Project ITNOS

CPU i7-4790k    Motherboard Gigabyte Z97N-WIFI    RAM G.Skill Sniper DDR3 1866mhz    GPU EVGA GTX1080Ti FTW3    Case Corsair 380T   

Storage Samsung EVO 250GB, Samsung EVO 1TB, WD Black 3TB, WD Black 5TB    PSU Corsair CX750M    Cooling Cryorig H7 with NF-A12x25

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
On 2/12/2018 at 10:01 PM, TVwazhere said:

The H105 is indeed quite thick for a RAD; 38mm compared to standard 25mm (1.5" compared to 1") nowhere does it list the thickest rad you could put there but it looks like might be able to squeeze it in there... It will be tight though! It'd not a guarantee though, so if you can find an h110i that would be better.

 

RAD support is not listed for the top, so unless you plan to mod it, it most likely cannot fit a rad at the top, due to either fan mount positioning, motherboard VRM's, RAM modules or a combination of the three.

Thank you for this! Yeah, the top doesnt look like it can support it, since I have a hard time putting in fans on the top with the motherboard.

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Power Supplies

×