Pump recommendations?

[MeDownYou]

Looking for a pump for a two 360 rads, and to be used with this Barrow LFPG65

 

 

[W-L]

Just now, MeDownYou said:

Looking for a pump for a two 360 rads, and to be used with this Barrow LFPG65

Can't go wrong with the D5 still one of the best pumps you can get out there. 

[Oshino Shinobu]

D5. Powerful, quiet and reliable. Probably the best pump available, still. 

[MeDownYou]

2 hours ago, W-L said:

Can't go wrong with the D5 still one of the best pumps you can get out there. 

So, if i get a D5 with that res, I'd need a top plate for the d5 right?

 

Something like this work? https://www.ebay.com/itm/112452682435

 

or if i swapped res how about this?https://www.ebay.com/itm/Barrow-T-Virus-Reservoir-with-D5-Pump-Top-PD5YKT230-230mm/112327305429?epid=605077347&hash=item1a273aa8d5:g:2osAAOSw4CFYvwPj

[Oshino Shinobu]

1 minute ago, MeDownYou said:

So, if i get a D5 with that res, I'd need a top plate for the d5 right?

 

Something like this work? https://www.ebay.com/itm/112452682435

You can buy D5s with tops pre-installed if you don't want to install it yourself, but basically, yeah. As long as it uses G1/4" fittings, it will work with pretty much all fittings. 

[W-L]

5 minutes ago, MeDownYou said:

So, if i get a D5 with that res, I'd need a top plate for the d5 right?

 

Something like this work? https://www.ebay.com/itm/112452682435

 

or if i swapped res how about this?https://www.ebay.com/itm/Barrow-T-Virus-Reservoir-with-D5-Pump-Top-PD5YKT230-230mm/112327305429?epid=605077347&hash=item1a273aa8d5:g:2osAAOSw4CFYvwPj

Correct you will need a pump top or an adapter for you to make it into a pump/res unit. 

[MeDownYou]

5 hours ago, W-L said:

Correct you will need a pump top or an adapter for you to make it into a pump/res unit. 

would a pump top to res require a g1/4 fitting (both sides then I take it?)

 

[W-L]

1 hour ago, MeDownYou said:

would a pump top to res require a g1/4 fitting (both sides then I take it?)

 

Yes a pump top will have G1/4” ports for you to then connect the res down to the pump and then out the the rest of the loop.