Really hard to get side panel on as AIO tubes in the way

[A Silver]

I have a Corsair 460x case and a Corsair H100i V2 and I find it really hard to get the glass side panel on as the tubes for the AIO are in the way. I did manage to get it on but I need to take off as the shroud on one of my GPU's is broken and I am planning on RMA'ing it (and also to dust my case) but I can not face it as it is such a pain to the panel back on. Any suggestions on how to keep the AIO tubes out the way as they stick out just a tad too much? When i got the side panel on I used friction to push the tubes down as I slid the side panel down but it wasn't easy and I don't feel happy putting a lot of pressure on the glass or the tubes. I attached a photo which shows that the tubes are touching the glass (ignore the cat in the corner)

[kelvinhall05]

They might be too stiff to move, especially since there's fluid in there. I'd just leave it be.

[A Silver]

6 minutes ago, kelvinhall05 said:

They might be too stiff to move, especially since there's fluid in there. I'd just leave it be.

Only issue it I am going to RMA one of my GPU's (edited topic as I forgot to mention that) as the shroud is broken so I have to take it off sooner or later.

[Guest]

 

I had a similar issue, but I used a zip tie to keep the tubes together which prevented the inner most tube from pushing out the outer most tube. I can't tell from your pic of that's what is going on though.