Nzxt manta

[Maxan98]

So my nzxt manta case has goten very manny marks on the glass that just do not look good, so is there anywere i can buy a new side panel for the Nzxt Manta?

[another random person]

4 minutes ago, Maxan98 said:

So my nzxt manta case has goten very manny marks on the glass that just do not look good, so is there anywere i can buy a new side panel for the Nzxt Manta?

I doubt that side panels for the Manta are sold separately, case spare parts are really hard to come by. 

[tikker]

I don't see replacement parts on their website, but you could try contacting them. Also one topic is enough  

[kelvinhall05]

eBay.

[another random person]

3 minutes ago, kelvinhall05 said:

eBay.

https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313.TR0.TRC0.H0.Xnzxt+manta+side+panel.TRS0&_nkw=nzxt+manta+side+panel&_sacat=0

 

nope

 

although there is a side panel for an opel car....

[Aleks NE]

38 minutes ago, Maxan98 said:

So my nzxt manta case has goten very manny marks on the glass that just do not look good, so is there anywere i can buy a new side panel for the Nzxt Manta?

You could get a glass fabricator or whatever they're called to cut out a glass side panel then make some DIY hangers for it on the metal part of the panel. 

[W-L]

6 hours ago, Maxan98 said:

So my nzxt manta case has goten very manny marks on the glass that just do not look good, so is there anywere i can buy a new side panel for the Nzxt Manta?

The NZXT manta has a plastic window your best option would be to contact the manufacture or to try and remove the scratches with something like this. 

https://www.amazon.com/NOVUS-7100-Plastic-Polish-Kit/dp/B002UCYRZU

 

-Multiple Threads Merged- 

[Maxan98]

On 2017-12-03 at 2:09 PM, <Aleks> said:

You could get a glass fabricator or whatever they're called to cut out a glass side panel then make some DIY hangers for it on the metal part of the panel. 

The glass is curved:(

 

[Aleks NE]

2 hours ago, Maxan98 said:

The glass is curved:(

 

I'm sure that is not a problem. They might have to place an order for it but in the end, it is the same process.

[wrw87]

On 6/12/2017 at 11:10 AM, Maxan98 said:

The glass is curved:(

 

I have the same issue. My plan is to make a glass panel and then cut the metal part to acomodate the FLAT Glass. Let me know if you have come with something better. Thanks