Jump to content

PSU: is it necessary to have a fan and casing?

Can I have a PSU circuit board only? Is it necessary to have its enclosure and fan?

 

Intention: try to reduce the form factor of desktop without compromising motherboard size (features).

Link to comment
Share on other sites

Link to post
Share on other sites

You need the fan in order to promote airflow, since the PSU will overheat otherwise.

the case is also basically a necessity -- don't open up a PSU unless you know what you're doing (you could die), and it's really not a good idea to take it out of the case, since the PSU case is grounded, and you probably don't want to take that away from your PSU.

QUOTE/TAG ME WHEN REPLYING

Spend As Much Time Writing Your Question As You Want Me To Spend Responding To It.

If I'm wrong, please point it out. I'm always learning & I won't bite.

 

Desktop:

Delidded Core i7 4770K - GTX 1070 ROG Strix - 16GB DDR3 - Lots of RGB lights I never change

Laptop:

HP Spectre X360 - i7 8560U - MX150 - 2TB SSD - 16GB DDR4

Link to comment
Share on other sites

Link to post
Share on other sites

Casing for PSU is crucial. Without it it can cause shorts at best, killing people and starting fires at worst. Same reason why we wrap electricity wires with plastic. You wont want electricity to go anywhere it shouldnt.

 

There are fanless PSUs, but with larger heatsinks to compensate they arent small. Go for SFX models instead

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites

Link to post
Share on other sites

Why is Apple devices such as Mac Pro and Mac Mini do not have a casing for their PSU?

Link to comment
Share on other sites

Link to post
Share on other sites

5 minutes ago, Leonard Looi said:

Why is Apple devices such as Mac Pro and Mac Mini do not have a casing for their PSU?

Because they use the actual aluminum (conductive) casing of the device as their PSU I think.

QUOTE/TAG ME WHEN REPLYING

Spend As Much Time Writing Your Question As You Want Me To Spend Responding To It.

If I'm wrong, please point it out. I'm always learning & I won't bite.

 

Desktop:

Delidded Core i7 4770K - GTX 1070 ROG Strix - 16GB DDR3 - Lots of RGB lights I never change

Laptop:

HP Spectre X360 - i7 8560U - MX150 - 2TB SSD - 16GB DDR4

Link to comment
Share on other sites

Link to post
Share on other sites

21 minutes ago, Leonard Looi said:

Why is Apple devices such as Mac Pro and Mac Mini do not have a casing for their PSU?

The entire thing isnt designed to be opened anyway

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites

Link to post
Share on other sites

Just get one or two pics pau style devices that have external bricks.

Want to custom loop?  Ask me more if you are curious

 

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×