Jump to content

Psu for Coffelake build.

Go to solution Solved by STRMfrmXMN,
7 minutes ago, Vacras said:

Hey guys, 

 

I’m currently working on a CAD (with some gaming as well) build for a friend of mine. I was looking at the EVGA Super Nova G3 550w.

 

I plan on using the i7 8700 for the build (hopefully it will be in stock around Christmas duh).

 

Any other suggestions? Here in Germany the G3 is 80€ and it would be somewhat nice to push a little more budget towards the GPU but I also don’t like cheaping out on the Psu. 

 

The 550G3 is fine.

Hey guys, 

 

I’m currently working on a CAD (with some gaming as well) build for a friend of mine. I was looking at the EVGA Super Nova G3 550w.

 

I plan on using the i7 8700 for the build (hopefully it will be in stock around Christmas duh).

 

Any other suggestions? Here in Germany the G3 is 80€ and it would be somewhat nice to push a little more budget towards the GPU but I also don’t like cheaping out on the Psu. 

 

Link to comment
https://linustechtips.com/topic/849469-psu-for-coffelake-build/
Share on other sites

Link to post
Share on other sites

7 minutes ago, Vacras said:

Hey guys, 

 

I’m currently working on a CAD (with some gaming as well) build for a friend of mine. I was looking at the EVGA Super Nova G3 550w.

 

I plan on using the i7 8700 for the build (hopefully it will be in stock around Christmas duh).

 

Any other suggestions? Here in Germany the G3 is 80€ and it would be somewhat nice to push a little more budget towards the GPU but I also don’t like cheaping out on the Psu. 

 

The 550G3 is fine.

My account is almost entirely dormant. Hope you all are having a grand time. Many years of fun were had here.

Link to comment
https://linustechtips.com/topic/849469-psu-for-coffelake-build/#findComment-10589307
Share on other sites

Link to post
Share on other sites

4 minutes ago, Vacras said:

The g2 is 15€ more. Isn’t the g3 the successor of the G2?

the CXM would be 65€ so I’m looking into that thanks.

the others are more expensive

 

If you're doing CAD for a living then I would get the best PSU you can afford. The G3 is up there.

My account is almost entirely dormant. Hope you all are having a grand time. Many years of fun were had here.

Link to comment
https://linustechtips.com/topic/849469-psu-for-coffelake-build/#findComment-10589343
Share on other sites

Link to post
Share on other sites

3 minutes ago, STRMfrmXMN said:

If you're doing CAD for a living then I would get the best PSU you can afford. The G3 is up there.

Well it’s not for a living, but I’m with you. Get a good Psu and use it for the next 5+ years instead of cheaping out :)

 

5 minutes ago, L.Lawliet said:

Yes but u know..typical annoying salesman..

The CXM is inferior to G3 but its gonna be fine..

Ah gotcha :P

Thank you guys!

Link to comment
https://linustechtips.com/topic/849469-psu-for-coffelake-build/#findComment-10589356
Share on other sites

Link to post
Share on other sites

It should be noted that the EVGA SuperNOVA G3 has an aggressive fan curve that ramps up the fan at low loads, and therefore is loud.

 

For 80 euros, I would recommend the BitFenix Whisper M.

'Fanboyism is stupid' - someone on this forum.

Be nice to each other boys and girls. And don't cheap out on a power supply.

Spoiler

CPU: Intel Core i7 4790K - 4.5 GHz | Motherboard: ASUS MAXIMUS VII HERO | RAM: 32GB Corsair Vengeance Pro DDR3 | SSD: Samsung 850 EVO - 500GB | GPU: MSI GTX 980 Ti Gaming 6GB | PSU: EVGA SuperNOVA 650 G2 | Case: NZXT Phantom 530 | Cooling: CRYORIG R1 Ultimate | Monitor: ASUS ROG Swift PG279Q | Peripherals: Corsair Vengeance K70 and Razer DeathAdder

 

Link to comment
https://linustechtips.com/topic/849469-psu-for-coffelake-build/#findComment-10590484
Share on other sites

Link to post
Share on other sites

4 minutes ago, HKZeroFive said:

It should be noted that the EVGA SuperNOVA G3 has an aggressive fan curve that ramps up the fan at low loads, and therefore is loud.

 

For 80 euros, I would recommend the BitFenix Whisper M.

Noise isn’t as much of an problem for this build :)

Link to comment
https://linustechtips.com/topic/849469-psu-for-coffelake-build/#findComment-10590495
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×