Jump to content

CPU stuck to water block of AIO

NightmaresDawn
 Share
Posted

During the process of troubleshooting my computer i needed to remove my CPU Cooler and CPU from my AM3+ Asus M5A99X rev 2 motherboard,while attempting to remove my CPU cooler i proceeded to yank the CPU out of the socket and it is now firmly attached to the CPU cooler. i have tried many different methods to get it off from rubbing alcohol to heating it up and trying to slide dental floss between the CPU and Cooler however this is to no success.

 

Would anyone have any ideas on how to remove my CPU from the Cooler as it is driving me up the wall.

 

Thanks

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

1. Check whether the pins on the socket are fine

 

2. Twist the CPU while pulling the two apart

 

3. Last resort: apply some alcohol to where they stick for a while, try separate them. Make sure the CPU is completely dry before using it again.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

i have been at this for two days now and minutes after posting this i placed the CPU cooler on the bench and it just fell off. after two days of heating it up, twisting, soaking with alcohol and all other resorts it just fell off.

 

Im sorry for wasting everyone's time thank you

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Troubleshooting

×