Jump to content

Help on my build

Tran
By Tran
in New Builds and Planning
 Share
Posted

I have two questions about my build

1. my Mobo and CPU are running at 32-33 Celsius is that good?

2. I got DDR4 3000 and my bios is saying it's running at 2133 mghz what's going on? 

Also ram says N/A in the slots they are in 

 

R5 1600

H100i

b350 tomahawk (I did update it) 

Team Group Vulcan DDR4 3000

Link to comment
https://linustechtips.com/topic/807656-help-on-my-build/
Share on other sites
Link to post
Share on other sites
Posted

1. Those are fine. However, load temps are what really matter. if they're under 85c you're golden.

2. DDR4-3000 just means that your RAM can support 3Ghz without crashing. any speed over DDR4-2400 is overclocking, and thus you will either need to bump your RAM speed up to 3Ghz yourself, or try loading the XMP profile, and seeing if it boots like that (unlikely)

QUOTE/TAG ME WHEN REPLYING

Spend As Much Time Writing Your Question As You Want Me To Spend Responding To It.

If I'm wrong, please point it out. I'm always learning & I won't bite.

 

Laptop:

Lenovo Yoga 7 Air: Ryzen 7840S, 32GiB DDR5

 

Desktop (Old but I never replaced it):

Delidded Core i7 4770K - GTX 1070 ROG Strix - 16GB DDR3 @2000Mhz

Link to comment
https://linustechtips.com/topic/807656-help-on-my-build/#findComment-10144700
Share on other sites
Link to post
Share on other sites
Posted

1. Perfectly normal for idle temps

2. You need to enable DOCP in the BIOS for it to run at full speed, it will be 2133 by default otherwise. 

Please quote our replys so we get a notification and can reply easily. Never cheap out on a PSU, or I will come to watch the fireworks. 

PSU Tier List

 

My specs

Spoiler

PC:

CPU: Intel Core i5-6600K @4.8GHz
CPU Cooler: Noctua NH-U14S 
Motherboard:  ASUS Maximus VIII Hero 
GPU: Zotac AMP Extreme 1070 @ 2114Mhz
Memory: Corsair Vengeance LPX 16GB (2 x 8GB) DDR4-2400 
Storage: Samsung 850 EVO-Series 500GB 
Storage: Western Digital Caviar Blue 1TB
Case: Cooler Master MasterCase Pro 5 
Power Supply: EVGA 750W G2

 

Peripherals 

Keyboard: Corsair K70 LUX Browns
Mouse: Logitech G502 
Headphones: Kingston HyperX Cloud Revolver 

Monitor: U2713M @ 75Hz

 

Link to comment
https://linustechtips.com/topic/807656-help-on-my-build/#findComment-10144709
Share on other sites
Link to post
Share on other sites
Posted
  • Author
9 minutes ago, rn8686 said:

1. Perfectly normal for idle temps

2. You need to enable DOCP in the BIOS for it to run at full speed, it will be 2133 by default otherwise. 

 

10 minutes ago, rn8686 said:

1. Perfectly normal for idle temps

2. You need to enable DOCP in the BIOS for it to run at full speed, it will be 2133 by default otherwise. 

It says N/A in the slots should I be worried?

Link to comment
https://linustechtips.com/topic/807656-help-on-my-build/#findComment-10144724
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, Tran said:

Also where is DOCP

it's marked XMP at the top of your screen in andvanced mode on MSI boards because they kept the intel layout

Primary System

  • CPU
    Ryzen R6 5700X
  • Motherboard
    MSI B350M mortar arctic
  • RAM
    32GB Corsair RGB 3600MT/s CAS18
  • GPU
    Zotac RTX 3070 OC
  • Case
    kind of a mess
  • Storage
    WD black NVMe SSD 500GB & 1TB samsung Sata ssd & x 1TB WD blue & x 3TB Seagate
  • PSU
    corsair RM750X white
  • Display(s)
    1440p 21:9 100Hz
Link to comment
https://linustechtips.com/topic/807656-help-on-my-build/#findComment-10144732
Share on other sites
Link to post
Share on other sites
Posted
  • Author
10 minutes ago, SquintyG33Rs said:

it's marked XMP at the top of your screen in andvanced mode on MSI boards because they kept the intel layout

Okay actually I click on the A-XMP profile 2 and it got my Ram to 2922 mghz which about right, but I still have a problem for the rams in the slots. Its say that it is N/A in the slots I have them in, I know I put them in the right slots 

Link to comment
https://linustechtips.com/topic/807656-help-on-my-build/#findComment-10144739
Share on other sites
Link to post
Share on other sites
Posted
8 hours ago, Tran said:

Okay actually I click on the A-XMP profile 2 and it got my Ram to 2922 mghz which about right, but I still have a problem for the rams in the slots. Its say that it is N/A in the slots I have them in, I know I put them in the right slots 

are you sure you're looking at the right slots... does neither of them show? because the system can't boot without ram. you couldn't see the bios screen if it wasn't detected at all.

Primary System

  • CPU
    Ryzen R6 5700X
  • Motherboard
    MSI B350M mortar arctic
  • RAM
    32GB Corsair RGB 3600MT/s CAS18
  • GPU
    Zotac RTX 3070 OC
  • Case
    kind of a mess
  • Storage
    WD black NVMe SSD 500GB & 1TB samsung Sata ssd & x 1TB WD blue & x 3TB Seagate
  • PSU
    corsair RM750X white
  • Display(s)
    1440p 21:9 100Hz
Link to comment
https://linustechtips.com/topic/807656-help-on-my-build/#findComment-10145742
Share on other sites
Link to post
Share on other sites
Posted
9 hours ago, Tran said:

This is what i see

IMG_0444.JPG

oh it's just saying it doesn't know what model they are. they are recognized fine

Primary System

  • CPU
    Ryzen R6 5700X
  • Motherboard
    MSI B350M mortar arctic
  • RAM
    32GB Corsair RGB 3600MT/s CAS18
  • GPU
    Zotac RTX 3070 OC
  • Case
    kind of a mess
  • Storage
    WD black NVMe SSD 500GB & 1TB samsung Sata ssd & x 1TB WD blue & x 3TB Seagate
  • PSU
    corsair RM750X white
  • Display(s)
    1440p 21:9 100Hz
Link to comment
https://linustechtips.com/topic/807656-help-on-my-build/#findComment-10147702
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing New Builds and Planning

×