Ryzen 1600 3.9ghz+

[Techicolors]

anyone able to overclock their ryzen 1600 to 3.9ghz or higher? 

[vanished]

@ShadowTechXTS I know you have one... did you ever try pushing it further?

[Not_Sean]

I'm on stock cooling and best i've done is 3.82, anything over that and it just crashes. Interested to hear from the serious OC guys. 

[kalnick]

14 minutes ago, Not_Sean said:

I'm on stock cooling and best i've done is 3.82, anything over that and it just crashes. Interested to hear from the serious OC guys. 

I set it to 3.8 didn't want to push it, but when I ran it stock with the 212 Evo it boosted up to 3.9 on 1 or 2 cores at a time. So I assume It would work fine I just haven't tried

[Techicolors]

Just now, kalnick said:

I set it to 3.8 didn't want to push it, but when I ran it stock with the 212 Evo it boosted up to 3.9 on 1 or 2 cores at a time. So I assume It would work fine I just haven't tried

yeah but having all 12 threads run at 3.9+ ghz stable is a different feat

[kalnick]

On 6/22/2017 at 5:58 PM, Technicolors said:

yeah but having all 12 threads run at 3.9+ ghz stable is a different feat

fair enough, I'll have to try it at some point

Right now Its running at 3.8 with a cpu voltage of 1.23750 (as per Ryzen master). HW Monitor shows a vcore voltage of 1.363.

So I'm thinking I got some breathing room with the voltage

I'm still a bit of OC newb and could be totaly wrong about that.

 

so using Ryzen Master I tired 3.85

10 min of AIda 64 stability test is likely not enough but its stable

I'm going to bumb it up to 3.9

 

 

 

3.9

 

3.95 crashed windows as soon as as the stability test started

I imagine I could maybe get working if I knew more and was more hands on with the settings.

[MoonlightSylv]

1 hour ago, Ryan_Vickers said:

@ShadowTechXTS I know you have one... did you ever try pushing it further?

I tried 4GHz and it didn't work but I could probably do 3.9 if I raised the voltage.

[He_162]

I've managed 3.85ghz, but to go any higher I need to do 1.5v. (3875mhz was only stable / would boot on 1.5v)

I refused to do anything other than boot or idle the processor at those speeds, I doubt it was stable, but at 1.375v, and 3.8ghz it was, wouldn't do more than that though.

[Ordinarily_Greater]

Bro i present you @jjohnthedon1!

[jjohnthedon1]

2 minutes ago, Ordinarily_Greater said:

Bro i present you @jjohnthedon1!

Haha cheers For the intro 

slap ur voltage on 1.39v manual 

and line load calibration to as high as you can for 3.9 

 

what board are are you using ? 

 

Llc is important as it stops droop 

 

if u find ur idle voltage is crazy higher than your load voltage turn llc back a notch

 

your ok up to 1.45v as long as u have a decent cooler man 

 

let me know how you get on with this

[jjohnthedon1]

1.42v for 4 ghz

 

also use cpuz or hw64 to monitor voltage and temps 

 

ryzen master is shite