Jump to content

2 identical sticks of RAM won't boot

NeutronGTX
By NeutronGTX
in Troubleshooting
 Share
Posted

Hi everyone

I'm currently experiencing an issue that is absolutely boggling my mind right now. I have two sticks of Corsair vengeance 1600mhz 4gb DDR3 that have been working happily together for plus minus 5 years.

 

Today, I upgraded to the H100i and after finishing the install all of a sudden my two sticks absolutely refuse to work together.

 

I have tested both sticks in every slot and it works everytime with just one stick. I even enabled XMP and reset my BIOS to no avail.

 

Why would a CPU cooler install suddenly cause such strange issues?

CPU: i5 2500K @ 4.2GHZ, GPU: AMD Radeon RX 480 4GB, RAM: Corsair Vengeance 8gb (2X4GB) 1600MHZ, Mobo: Asus P8Z77M, Chassis: Phanteks P400s Tempered Glass edition, Storage: Seagate 1TB + Samsung 2TB In RAID 0 + Crucial MX100 256GB SSD, Sound Card: Asus Xonar DS, Mouse: Steelseries Sensei, Keyboard: CM Storm Quick Fire Pro, Monitor: BenQ G2410HD + Samsung SA1900

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Are you sure its the rams fault? Not the pump? did you connect all the connections? Also, do you have another set of memory you could try? 

CPU: AMD Ryzen 5 5600X | CPU Cooler: Stock AMD Cooler | Motherboard: Asus ROG STRIX B550-F GAMING (WI-FI) | RAM: Corsair Vengeance LPX 16 GB (2 x 8 GB) DDR4-3000 CL16 | GPU: Nvidia GTX 1060 6GB Zotac Mini | Case: K280 Case | PSU: Cooler Master B600 Power supply | SSD: 1TB  | HDDs: 1x 250GB & 1x 1TB WD Blue | Monitors: 24" Acer S240HLBID + 24" Samsung  | OS: Win 10 Pro

 

Audio: Behringer Q802USB Xenyx 8 Input Mixer |  U-PHORIA UMC204HD | Behringer XM8500 Dynamic Cardioid Vocal Microphone | Sound Blaster Audigy Fx PCI-E card.

 

Home Lab:  Lenovo ThinkCenter M82 ESXi 6.7 | Lenovo M93 Tiny Exchange 2019 | TP-LINK TL-SG1024D 24-Port Gigabit | Cisco ASA 5506 firewall  | Cisco Catalyst 3750 Gigabit Switch | Cisco 2960C-LL | HP MicroServer G8 NAS | Custom built SCCM Server.

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
2 minutes ago, Abdul201588 said:

Are you sure its the rams fault? Not the pump? did you connect all the connections? Also, do you have another set of memory you could try? 

It is definitely the RAMs fault. The DRAM LED built into my Mobo to signify memory errors lights up with both sticks installed. I don't have another set to test with

CPU: i5 2500K @ 4.2GHZ, GPU: AMD Radeon RX 480 4GB, RAM: Corsair Vengeance 8gb (2X4GB) 1600MHZ, Mobo: Asus P8Z77M, Chassis: Phanteks P400s Tempered Glass edition, Storage: Seagate 1TB + Samsung 2TB In RAID 0 + Crucial MX100 256GB SSD, Sound Card: Asus Xonar DS, Mouse: Steelseries Sensei, Keyboard: CM Storm Quick Fire Pro, Monitor: BenQ G2410HD + Samsung SA1900

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
5 minutes ago, NeutronGTX said:

It is definitely the RAMs fault. The DRAM LED built into my Mobo to signify memory errors lights up with both sticks installed. I don't have another set to test with

Very strange. What was your previous CPU cooler? 

1 minute ago, LabRat said:

did you install any of that software with the h100?

I don't think installed anything since he can't get his system to start...

CPU: AMD Ryzen 5 5600X | CPU Cooler: Stock AMD Cooler | Motherboard: Asus ROG STRIX B550-F GAMING (WI-FI) | RAM: Corsair Vengeance LPX 16 GB (2 x 8 GB) DDR4-3000 CL16 | GPU: Nvidia GTX 1060 6GB Zotac Mini | Case: K280 Case | PSU: Cooler Master B600 Power supply | SSD: 1TB  | HDDs: 1x 250GB & 1x 1TB WD Blue | Monitors: 24" Acer S240HLBID + 24" Samsung  | OS: Win 10 Pro

 

Audio: Behringer Q802USB Xenyx 8 Input Mixer |  U-PHORIA UMC204HD | Behringer XM8500 Dynamic Cardioid Vocal Microphone | Sound Blaster Audigy Fx PCI-E card.

 

Home Lab:  Lenovo ThinkCenter M82 ESXi 6.7 | Lenovo M93 Tiny Exchange 2019 | TP-LINK TL-SG1024D 24-Port Gigabit | Cisco ASA 5506 firewall  | Cisco Catalyst 3750 Gigabit Switch | Cisco 2960C-LL | HP MicroServer G8 NAS | Custom built SCCM Server.

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
9 minutes ago, LabRat said:

did you install any of that software with the h100?

No, I'm running the fans from my mobo so I have no use for the software.

CPU: i5 2500K @ 4.2GHZ, GPU: AMD Radeon RX 480 4GB, RAM: Corsair Vengeance 8gb (2X4GB) 1600MHZ, Mobo: Asus P8Z77M, Chassis: Phanteks P400s Tempered Glass edition, Storage: Seagate 1TB + Samsung 2TB In RAID 0 + Crucial MX100 256GB SSD, Sound Card: Asus Xonar DS, Mouse: Steelseries Sensei, Keyboard: CM Storm Quick Fire Pro, Monitor: BenQ G2410HD + Samsung SA1900

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
7 minutes ago, Abdul201588 said:

Very strange. What was your previous CPU cooler? 

I don't think installed anything since he can't get his system to start...

Used to have a hyper 212 evo. My PC does start with only one stick of RAM in, in fact I'm typing this response on that very same computer right now.

CPU: i5 2500K @ 4.2GHZ, GPU: AMD Radeon RX 480 4GB, RAM: Corsair Vengeance 8gb (2X4GB) 1600MHZ, Mobo: Asus P8Z77M, Chassis: Phanteks P400s Tempered Glass edition, Storage: Seagate 1TB + Samsung 2TB In RAID 0 + Crucial MX100 256GB SSD, Sound Card: Asus Xonar DS, Mouse: Steelseries Sensei, Keyboard: CM Storm Quick Fire Pro, Monitor: BenQ G2410HD + Samsung SA1900

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, NeutronGTX said:

Used to have a hyper 212 evo. My PC does start with only one stick of RAM in, in fact I'm typing this response on that very same computer right now.

Very strange indeed. So you're using your old cooler then? if only one works then it seems to me that the other one is messed up. I'd recommend using memtest and run it couple of hours to see if there is any issues with the memory. 

 

CPU: AMD Ryzen 5 5600X | CPU Cooler: Stock AMD Cooler | Motherboard: Asus ROG STRIX B550-F GAMING (WI-FI) | RAM: Corsair Vengeance LPX 16 GB (2 x 8 GB) DDR4-3000 CL16 | GPU: Nvidia GTX 1060 6GB Zotac Mini | Case: K280 Case | PSU: Cooler Master B600 Power supply | SSD: 1TB  | HDDs: 1x 250GB & 1x 1TB WD Blue | Monitors: 24" Acer S240HLBID + 24" Samsung  | OS: Win 10 Pro

 

Audio: Behringer Q802USB Xenyx 8 Input Mixer |  U-PHORIA UMC204HD | Behringer XM8500 Dynamic Cardioid Vocal Microphone | Sound Blaster Audigy Fx PCI-E card.

 

Home Lab:  Lenovo ThinkCenter M82 ESXi 6.7 | Lenovo M93 Tiny Exchange 2019 | TP-LINK TL-SG1024D 24-Port Gigabit | Cisco ASA 5506 firewall  | Cisco Catalyst 3750 Gigabit Switch | Cisco 2960C-LL | HP MicroServer G8 NAS | Custom built SCCM Server.

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

what happens if you revert? might be a pain but something is obviously at fault. best to revert and recheck the ram and slots/

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

and another thing. possible short on the board after installing the bracket for the aio.

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Troubleshooting

×