Jump to content

is using a custom resolution on a display bad?

AlTech
Go to solution Solved by Glenwing,
4 minutes ago, AluminiumTech said:

So, 

GeForce experience Ngreedia has recommended that I run at 2517x1527 at some games by downsampling.

 

And I was wondering if there was any damage that could be caused to my monitor by running it at 2715x1527 custom resolution instead of it's normal 1920x1080.

 

I know it doesn't replicate the look or feel of 1440p or thereabouts but I wanted some extra screen real estate until I get a monitor upgrade.

 

Can any damage come to my monitor or am I fine?

No, the monitor never receives the higher resolution image, it's downscaled to 1080p before it leaves the graphics card. The monitor won't even know the difference.

So, 

GeForce experience Ngreedia has recommended that I run at 2517x1527 at some games by upsampling.

 

And I was wondering if there was any damage that could be caused to my monitor by running it at 2715x1527 custom resolution instead of it's normal 1920x1080.

 

I know it doesn't replicate the look or feel of 1440p or thereabouts but I wanted some extra screen real estate until I get a monitor upgrade.

 

Can any damage come to my monitor or am I fine?

Judge a product on its own merits AND the company that made it.

How to setup MSI Afterburner OSD | How to make your AMD Radeon GPU more efficient with Radeon Chill | (Probably) Why LMG Merch shipping to the EU is expensive

Oneplus 6 (Early 2023 to present) | HP Envy 15" x360 R7 5700U (Mid 2021 to present) | Steam Deck (Late 2022 to present)

 

Mid 2023 AlTech Desktop Refresh - AMD R7 5800X (Mid 2023), XFX Radeon RX 6700XT MBA (Mid 2021), MSI X370 Gaming Pro Carbon (Early 2018), 32GB DDR4-3200 (16GB x2) (Mid 2022

Noctua NH-D15 (Early 2021), Corsair MP510 1.92TB NVMe SSD (Mid 2020), beQuiet Pure Wings 2 140mm x2 & 120mm x1 (Mid 2023),

Link to comment
Share on other sites

Link to post
Share on other sites

It's impossible to damage a monitor through a custom resolution. You're fine ^_^

CPU: AMD Ryzen 7 5800X3D GPU: AMD Radeon RX 6900 XT 16GB GDDR6 Motherboard: MSI PRESTIGE X570 CREATION
AIO: Corsair H150i Pro RAM: Corsair Dominator Platinum RGB 32GB 3600MHz DDR4 Case: Lian Li PC-O11 Dynamic PSU: Corsair RM850x White

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, Morgan MLGman said:

It's impossible to damage a monitor through a custom resolution. You're fine ^_^

 

Just now, Aleksiandrovich said:

No.

Well then why doesn't Windows allow it natively?

 

I had to hunt through GeForce Control Panel and click to agree to a wall of text with stuff about warranty and potentially harming a display

Judge a product on its own merits AND the company that made it.

How to setup MSI Afterburner OSD | How to make your AMD Radeon GPU more efficient with Radeon Chill | (Probably) Why LMG Merch shipping to the EU is expensive

Oneplus 6 (Early 2023 to present) | HP Envy 15" x360 R7 5700U (Mid 2021 to present) | Steam Deck (Late 2022 to present)

 

Mid 2023 AlTech Desktop Refresh - AMD R7 5800X (Mid 2023), XFX Radeon RX 6700XT MBA (Mid 2021), MSI X370 Gaming Pro Carbon (Early 2018), 32GB DDR4-3200 (16GB x2) (Mid 2022

Noctua NH-D15 (Early 2021), Corsair MP510 1.92TB NVMe SSD (Mid 2020), beQuiet Pure Wings 2 140mm x2 & 120mm x1 (Mid 2023),

Link to comment
Share on other sites

Link to post
Share on other sites

4 minutes ago, AluminiumTech said:

So, 

GeForce experience Ngreedia has recommended that I run at 2517x1527 at some games by downsampling.

 

And I was wondering if there was any damage that could be caused to my monitor by running it at 2715x1527 custom resolution instead of it's normal 1920x1080.

 

I know it doesn't replicate the look or feel of 1440p or thereabouts but I wanted some extra screen real estate until I get a monitor upgrade.

 

Can any damage come to my monitor or am I fine?

No, the monitor never receives the higher resolution image, it's downscaled to 1080p before it leaves the graphics card. The monitor won't even know the difference.

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, Glenwing said:

No, the monitor never receives the higher resolution image, it's downscaled to 1080p before it leaves the graphics card. The monitor won't even know the difference.

Even at the Windows Desktop and using it outside of gaming?

Judge a product on its own merits AND the company that made it.

How to setup MSI Afterburner OSD | How to make your AMD Radeon GPU more efficient with Radeon Chill | (Probably) Why LMG Merch shipping to the EU is expensive

Oneplus 6 (Early 2023 to present) | HP Envy 15" x360 R7 5700U (Mid 2021 to present) | Steam Deck (Late 2022 to present)

 

Mid 2023 AlTech Desktop Refresh - AMD R7 5800X (Mid 2023), XFX Radeon RX 6700XT MBA (Mid 2021), MSI X370 Gaming Pro Carbon (Early 2018), 32GB DDR4-3200 (16GB x2) (Mid 2022

Noctua NH-D15 (Early 2021), Corsair MP510 1.92TB NVMe SSD (Mid 2020), beQuiet Pure Wings 2 140mm x2 & 120mm x1 (Mid 2023),

Link to comment
Share on other sites

Link to post
Share on other sites

You're still running the monitor at 1080p so you're fine. In some odd cases, the monitor may allow you to set a higher-than-native resolution, but will complain about it or turn off. But that's not the case here. 

Main System: Phobos

AMD Ryzen 7 2700 (8C/16T), ASRock B450 Steel Legend, 16GB G.SKILL Aegis DDR4 3000MHz, AMD Radeon RX 570 4GB (XFX), 960GB Crucial M500, 2TB Seagate BarraCuda, Windows 10 Pro for Workstations/macOS Catalina

 

Secondary System: York

Intel Core i7-2600 (4C/8T), ASUS P8Z68-V/GEN3, 16GB GEIL Enhance Corsa DDR3 1600MHz, Zotac GeForce GTX 550 Ti 1GB, 240GB ADATA Ultimate SU650, Windows 10 Pro for Workstations

 

Older File Server: Yet to be named

Intel Pentium 4 HT (1C/2T), Intel D865GBF, 3GB DDR 400MHz, ATI Radeon HD 4650 1GB (HIS), 80GB WD Caviar, 320GB Hitachi Deskstar, Windows XP Pro SP3, Windows Server 2003 R2

Link to comment
Share on other sites

Link to post
Share on other sites

 

 

Just now, Jamiec1130 said:

You're still running the monitor at 1080p so you're fine. In some odd cases, the monitor may allow you to set a higher-than-native resolution, but will complain about it or turn off. But that's not the case here. 

 

1 minute ago, Glenwing said:

Yes

 

5 minutes ago, Aleksiandrovich said:

No.

 

6 minutes ago, Morgan MLGman said:

It's impossible to damage a monitor through a custom resolution. You're fine ^_^

 

Thanks guys :).

 

Just wanted to double check.

Judge a product on its own merits AND the company that made it.

How to setup MSI Afterburner OSD | How to make your AMD Radeon GPU more efficient with Radeon Chill | (Probably) Why LMG Merch shipping to the EU is expensive

Oneplus 6 (Early 2023 to present) | HP Envy 15" x360 R7 5700U (Mid 2021 to present) | Steam Deck (Late 2022 to present)

 

Mid 2023 AlTech Desktop Refresh - AMD R7 5800X (Mid 2023), XFX Radeon RX 6700XT MBA (Mid 2021), MSI X370 Gaming Pro Carbon (Early 2018), 32GB DDR4-3200 (16GB x2) (Mid 2022

Noctua NH-D15 (Early 2021), Corsair MP510 1.92TB NVMe SSD (Mid 2020), beQuiet Pure Wings 2 140mm x2 & 120mm x1 (Mid 2023),

Link to comment
Share on other sites

Link to post
Share on other sites

8 minutes ago, AluminiumTech said:

So, 

GeForce experience Ngreedia has recommended that I run at 2517x1527 at some games by downsampling.

 

And I was wondering if there was any damage that could be caused to my monitor by running it at 2715x1527 custom resolution instead of it's normal 1920x1080.

 

I know it doesn't replicate the look or feel of 1440p or thereabouts but I wanted some extra screen real estate until I get a monitor upgrade.

 

Can any damage come to my monitor or am I fine?

I created a 240P preset for my monitor. Your fine...

Link to comment
Share on other sites

Link to post
Share on other sites

your monitor only has 1920x1080 pixels. No other resolution will ever be shown on the monitor. Ever. It physically can't. Any other resolution is scaled to the monitors pixels before the monitor shows it. It can't be damaged by this.

Build: Intel S2600gz, 2x E5-2670, EVGA SC 1070, Zotac 1060 6GB mini, 48GB Micron 1333mhz ECC DDR3, 2x Intel DPS-750XB 750 watt PSU

https://pcpartpicker.com/user/elerek/saved/3T7D4D

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×