cpu getting hot

[TheBlueKingLP]

my cpu getting hot when boot,i check in bios it jump from 30C' to 70C' within 1 minute, how can i fix it?

[3 Lions]

What is your CPU and what cooler do you have? 

[TheBlueKingLP]

my cpu is I7-6900K,CPU cooler is Corsair H110i

[Delian]

Check your Thermal Paste.

[3 Lions]

1 minute ago, TheBlueKingLP said:

my cu is I7-6900K,CPU cooler is Corsair H110i

Is your CPU overclocked? 

[TheBlueKingLP]

2 minutes ago, Delian said:

Check your Thermal Paste.

I tried reapply thermal paste,still hot

 

1 minute ago, LinusTechTipsFanFromDarlo said:

Is your CPU overclocked? 

No

[Delian]

Mhh Check if your Cpu Cooler has to much Dust.

[TheBlueKingLP]

2 minutes ago, Delian said:

Mhh Check if your Cpu Cooler has to much Dust.

Not so many dust, just used 2 month

[Delian]

1 minute ago, TheBlueKingLP said:

Not so many dust, just used 2 month

It worked fine before?

 

[TheBlueKingLP]

1 minute ago, Delian said:

It worked fine before?

 

yes

[Delian]

2 minutes ago, TheBlueKingLP said:

yes

Check with Aida64 and Benchmark how Hot it gets maybe its just because of the Bios. 

[TheBlueKingLP]

1 minute ago, Delian said:

Check with Aida64 and Benchmark how Hot it gets maybe its just because of the Bios. 

but i can't boot it now, because of overheat

[malon]

Does the pump still work, are the fans spinning , can you post a pic of the applied termal paste on the cpu?

[Delian]

Mhh i am Sorry i have no Clue.

[TheBlueKingLP]

2 minutes ago, malon said:

Does the pump still work, are the fans spinning , can you post a pic of the applied termal paste on the cpu?

the fan is spinning, but how can i know is the pump working?(i post the photo later)

[malon]

2 minutes ago, TheBlueKingLP said:

the fan is spinning, but how can i know is the pump working?(i post the photo later)

The pump should be making a specific low humming noise and have a small amount of vibration when it is turned on, try to listen to it.

[cron.7]

what about voltage? some error and it jumped too high?

[TheBlueKingLP]

3 minutes ago, 5chmidti said:

what about voltage? some error and it jumped too high?

i didn't change the voltage, its default settings

[Glennieboyyy007]

try an air cooler if you have one or borrow one from a friend. i think your pump is dead.

[TheBlueKingLP]

27 minutes ago, malon said:

Does the pump still work, are the fans spinning , can you post a pic of the applied termal paste on the cpu?

 

Here is the photos

 

[SSS33]

Yep sounds like the pump

[TheBlueKingLP]

but why the pump sudden death?

[malon]

1 hour ago, TheBlueKingLP said:

 

Here is the photos

 

 

 

the termal paste seems to be aplied propperly, as to why a pump dies all of a sudden can be a lot of things, i think it is bad luck in most cases and accasionaly used abuse.

You did say you only have had the cooler for a few months so if it was bought new you should be able to return it for a new one in the store you bought it if you(or they)have a receipt and the original box.

[TheBlueKingLP]

2 hours ago, malon said:

The pump should be making a specific low humming noise and have a small amount of vibration when it is turned on, try to listen to it.

 

14 minutes ago, malon said:

the termal paste seems to be aplied propperly, as to why a pump dies all of a sudden can be a lot of things, i think it is bad luck in most cases and accasionaly used abuse.

You did say you only have had the cooler for a few months so if it was bought new you should be able to return it for a new one in the store you bought it if you(or they)have a receipt and the original box.

the pump doesn't die, still working fine

[malon]

2 minutes ago, TheBlueKingLP said:

 

the pump doesn't die, still working fine

I have no idea what it might be then, maybe you can feel at the tubing and the rad it there is an area where it is suddenly much hotter than just an inch earlier.