Need help configuring my fan setup

[PrincipalFlash]

Hello.

The plan for my setup was an X52 in the front with 2xFractal Design venturi HP-14 in push pull to get the best temps on the cpu but, then the question is do the Venturi's in the 120mm mounting way fit the rad?
For rear exhaust I was planning on using 1x 140mm Nzxt Aer and 2x140mm on top for mostly the rgb's.
The case I will be using is a Phanteks Enthoo Evolv.

Thanks in advance for your help.

[Walt]

11 minutes ago, PrincipalFlash said:

Hello.

The plan for my setup was an X52 in the front with 2xFractal Design venturi HP-14 in push pull to get the best temps on the cpu but, then the question is do the Venturi's in the 120mm mounting way fit the rad?
For rear exhaust I was planning on using 1x 140mm Nzxt Aer and 2x140mm on top for mostly the rgb's.
The case I will be using is a Phanteks Enthoo Evolv.

Thanks in advance for your help.

It standard comes with 140MM fans so I think it will fit 

 

EDIT: 

Ow I now read that you want push pull so then it gets bigger... I am not sure. Sorry

 

[PrincipalFlash]

8 minutes ago, Walt said:

It standard comes with 140MM fans so I think it will fit 

 

EDIT: 

Ow I now read that you want push pull so then it gets bigger... I am not sure. Sorry

 

The X52 is the 240mm version. I think you are talking about the X62 which is the 280mm.

[LogicalDrm]

Not sure what the question here is. But I'll point out the obvious that 140mm fans won't fit to 2x120mm (240mm) rad. Since rad thickness is 30mm and fans are 25mm piece, you need to have 80mm clearance. If you have case already, that will be easy thing to measure.