PC dead

Froody129 · November 29, 2016

I just bought an MSI Z170A Tomahawk AC and an H440. I have an Antec VP700P. I upgraded from an MSI H110M. 24-pin, CPU power and front ports are plugged in. PC was 100% working before I changed parts. It makes no sound, no fans spin and no electrical noises. PSU isn't turning on at all. RAM is in 1 and 3(Ballistix Sport 2400). 1000 times checked plug at wall and PSU plug. PLEASE HELP

SlipperyPete · November 29, 2016

15 minutes ago, Froody129 said:

I just bought an MSI Z170A Tomahawk AC and an H440. I have an Antec VP700P. I upgraded from an MSI H110M. 24-pin, CPU power and front ports are plugged in. PC was 100% working before I changed parts. It makes no sound, no fans spin and no electrical noises. PSU isn't turning on at all. RAM is in 1 and 3(Ballistix Sport 2400). 1000 times checked plug at wall and PSU plug. PLEASE HELP

sounds like a dead motherboard. did you check all the plugs on both ends of the psu cabkes( IE where they plug into the psu and the motherboard)

WigglesTheHoly · November 29, 2016

Have you checked the power button is plugged into the correct spot on the motherboard, did you use the new motherboard io connector or did you reuse the old mobo front io connector?

Froody129 · November 30, 2016

12 hours ago, WigglesTheHoly said:

Have you checked the power button is plugged into the correct spot on the motherboard, did you use the new motherboard io connector or did you reuse the old mobo front io connector?

All front IO is plugged in the right place. Today I'll try short start the PC to see if the cable going to the power button is bad, if not it's a dead motherboard :'|