Jump to content

TITAN X(P) vs 2 gtx 1080s in sli

Sahil10416
By Sahil10416
in Graphics Cards
 Share
Posted
7 minutes ago, Sahil10416 said:

Should i buy a single TITAN X(P) or 2 gtx 1080s in sli for 3d rendering. (software like Maya, 3D max etc).

5k gaming? No. Go with the SLI

Build

Spoiler

Ryzen 5 1600, Cooler Master Hyper 212 Evo, Gigabyte X470 Gaming 7. TeamGroup Viper 4133mhz 16gb, XFX RX 480 8 GB (1000mhz cause dying), Samsung 850 EVO 250 GB M.2 SSD, An old 1tb 5400 rpm 2.5" HDD, TeamGroup 480gb & Kingston 480gb ssds (May RAID 0), 1TB Western Ditigal HDD, EVGA 750W G2 PSU, Phanteks P400s

----------X-----------X------------

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Guys i am not buying the graphics card for gaming, i want it for productivity so plz comment keeping this in mind.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, Sahil10416 said:

Guys i am not buying the graphics card for gaming, i want it for productivity so plz comment keeping this in mind.

Yes if everything u have gets good sli support and does not need 12gb of ram, sli would be better as u would get more cuda cores

Build

Spoiler

Ryzen 5 1600, Cooler Master Hyper 212 Evo, Gigabyte X470 Gaming 7. TeamGroup Viper 4133mhz 16gb, XFX RX 480 8 GB (1000mhz cause dying), Samsung 850 EVO 250 GB M.2 SSD, An old 1tb 5400 rpm 2.5" HDD, TeamGroup 480gb & Kingston 480gb ssds (May RAID 0), 1TB Western Ditigal HDD, EVGA 750W G2 PSU, Phanteks P400s

----------X-----------X------------

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
3 minutes ago, Sahil10416 said:

Guys i am not buying the graphics card for gaming, i want it for productivity so plz comment keeping this in mind.

Doesn't the 980Ti outperform the 1080 for productivity workloads? I remember watching a review that specifically tested CUDA in Premiere and found the 980Ti beating out the 1080. Get those in SLI (more CUDA cores too).

Primary PC-

CPU: Intel i7-6800k @ 4.2-4.4Ghz   CPU COOLER: Bequiet Dark Rock Pro 4   MOBO: MSI X99A SLI Plus   RAM: 32GB Corsair Vengeance LPX quad-channel DDR4-2800  GPU: EVGA GTX 1080 SC2 iCX   PSU: Corsair RM1000i   CASE: Corsair 750D Obsidian   SSDs: 500GB Samsung 960 Evo + 256GB Samsung 850 Pro   HDDs: Toshiba 3TB + Seagate 1TB   Monitors: Acer Predator XB271HUC 27" 2560x1440 (165Hz G-Sync)  +  LG 29UM57 29" 2560x1080   OS: Windows 10 Pro

Album

Other Systems:

Spoiler

Home HTPC/NAS-

CPU: AMD FX-8320 @ 4.4Ghz  MOBO: Gigabyte 990FXA-UD3   RAM: 16GB dual-channel DDR3-1600  GPU: Gigabyte GTX 760 OC   PSU: Rosewill 750W   CASE: Antec Gaming One   SSD: 120GB PNY CS1311   HDDs: WD Red 3TB + WD 320GB   Monitor: Samsung SyncMaster 2693HM 26" 1920x1200 -or- Steam Link to Vizio M43C1 43" 4K TV  OS: Windows 10 Pro

 

Offsite NAS/VM Server-

CPU: 2x Xeon E5645 (12-core)  Model: Dell PowerEdge T610  RAM: 16GB DDR3-1333  PSUs: 2x 570W  SSDs: 8GB Kingston Boot FD + 32GB Sandisk Cache SSD   HDDs: WD Red 4TB + Seagate 2TB + Seagate 320GB   OS: FreeNAS 11+

 

Laptop-

CPU: Intel i7-3520M   Model: Dell Latitude E6530   RAM: 8GB dual-channel DDR3-1600  GPU: Nvidia NVS 5200M   SSD: 240GB TeamGroup L5   HDD: WD Black 320GB   Monitor: Samsung SyncMaster 2693HM 26" 1920x1200   OS: Windows 10 Pro

Having issues with a Corsair AIO? Possible fix here:

Spoiler

Are you getting weird fan behavior, speed fluctuations, and/or other issues with Link?

Are you running AIDA64, HWinfo, CAM, or HWmonitor? (ASUS suite & other monitoring software often have the same issue.)

Corsair Link has problems with some monitoring software so you may have to change some settings to get them to work smoothly.

-For AIDA64: First make sure you have the newest update installed, then, go to Preferences>Stability and make sure the "Corsair Link sensor support" box is checked and make sure the "Asetek LC sensor support" box is UNchecked.

-For HWinfo: manually disable all monitoring of the AIO sensors/components.

-For others: Disable any monitoring of Corsair AIO sensors.

That should fix the fan issue for some Corsair AIOs (H80i GT/v2, H110i GTX/H115i, H100i GTX and others made by Asetek). The problem is bad coding in Link that fights for AIO control with other programs. You can test if this worked by setting the fan speed in Link to 100%, if it doesn't fluctuate you are set and can change the curve to whatever. If that doesn't work or you're still having other issues then you probably still have a monitoring software interfering with the AIO/Link communications, find what it is and disable it.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

SLI 1080's. Cudas,m8. But, if you use them for productivity and you want to spend that much, why not quadro ?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
Just now, pyrojoe34 said:

Doesn't the 980Ti outperform the 1080 for productivity workloads? I remember watching a review that specifically tested CUDA in Premiere and found the 980Ti beating out the 1080. Get those in SLI (more CUDA cores too).

can i have the video :)

 

Build

Spoiler

Ryzen 5 1600, Cooler Master Hyper 212 Evo, Gigabyte X470 Gaming 7. TeamGroup Viper 4133mhz 16gb, XFX RX 480 8 GB (1000mhz cause dying), Samsung 850 EVO 250 GB M.2 SSD, An old 1tb 5400 rpm 2.5" HDD, TeamGroup 480gb & Kingston 480gb ssds (May RAID 0), 1TB Western Ditigal HDD, EVGA 750W G2 PSU, Phanteks P400s

----------X-----------X------------

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

No, 980ti doesn't outperform 1080 in productivity because although 980ti has higher number of cudas but 1080 has approx 500mhz higher freq.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
4 minutes ago, DeezNoNos said:

can i have the video :)

 

I think this is the one. It's a small difference (basically negligible) but with the 980Ti being cheaper that seems like the right choice.

 

It's possible that this has changed with improved drivers though.

Primary PC-

CPU: Intel i7-6800k @ 4.2-4.4Ghz   CPU COOLER: Bequiet Dark Rock Pro 4   MOBO: MSI X99A SLI Plus   RAM: 32GB Corsair Vengeance LPX quad-channel DDR4-2800  GPU: EVGA GTX 1080 SC2 iCX   PSU: Corsair RM1000i   CASE: Corsair 750D Obsidian   SSDs: 500GB Samsung 960 Evo + 256GB Samsung 850 Pro   HDDs: Toshiba 3TB + Seagate 1TB   Monitors: Acer Predator XB271HUC 27" 2560x1440 (165Hz G-Sync)  +  LG 29UM57 29" 2560x1080   OS: Windows 10 Pro

Album

Other Systems:

Spoiler

Home HTPC/NAS-

CPU: AMD FX-8320 @ 4.4Ghz  MOBO: Gigabyte 990FXA-UD3   RAM: 16GB dual-channel DDR3-1600  GPU: Gigabyte GTX 760 OC   PSU: Rosewill 750W   CASE: Antec Gaming One   SSD: 120GB PNY CS1311   HDDs: WD Red 3TB + WD 320GB   Monitor: Samsung SyncMaster 2693HM 26" 1920x1200 -or- Steam Link to Vizio M43C1 43" 4K TV  OS: Windows 10 Pro

 

Offsite NAS/VM Server-

CPU: 2x Xeon E5645 (12-core)  Model: Dell PowerEdge T610  RAM: 16GB DDR3-1333  PSUs: 2x 570W  SSDs: 8GB Kingston Boot FD + 32GB Sandisk Cache SSD   HDDs: WD Red 4TB + Seagate 2TB + Seagate 320GB   OS: FreeNAS 11+

 

Laptop-

CPU: Intel i7-3520M   Model: Dell Latitude E6530   RAM: 8GB dual-channel DDR3-1600  GPU: Nvidia NVS 5200M   SSD: 240GB TeamGroup L5   HDD: WD Black 320GB   Monitor: Samsung SyncMaster 2693HM 26" 1920x1200   OS: Windows 10 Pro

Having issues with a Corsair AIO? Possible fix here:

Spoiler

Are you getting weird fan behavior, speed fluctuations, and/or other issues with Link?

Are you running AIDA64, HWinfo, CAM, or HWmonitor? (ASUS suite & other monitoring software often have the same issue.)

Corsair Link has problems with some monitoring software so you may have to change some settings to get them to work smoothly.

-For AIDA64: First make sure you have the newest update installed, then, go to Preferences>Stability and make sure the "Corsair Link sensor support" box is checked and make sure the "Asetek LC sensor support" box is UNchecked.

-For HWinfo: manually disable all monitoring of the AIO sensors/components.

-For others: Disable any monitoring of Corsair AIO sensors.

That should fix the fan issue for some Corsair AIOs (H80i GT/v2, H110i GTX/H115i, H100i GTX and others made by Asetek). The problem is bad coding in Link that fights for AIO control with other programs. You can test if this worked by setting the fan speed in Link to 100%, if it doesn't fluctuate you are set and can change the curve to whatever. If that doesn't work or you're still having other issues then you probably still have a monitoring software interfering with the AIO/Link communications, find what it is and disable it.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

@lulake- because the only quadro that i can with my budget is m5000 which has lower cudas , frequency & older architecture.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
6 minutes ago, Lulake said:

SLI 1080's. Cudas,m8. But, if you use them for productivity and you want to spend that much, why not quadro ?

He probably doesn't need FP64, that much RAM, or 10bit color so the Quadro is overpriced and unnecessary for his application.

Primary PC-

CPU: Intel i7-6800k @ 4.2-4.4Ghz   CPU COOLER: Bequiet Dark Rock Pro 4   MOBO: MSI X99A SLI Plus   RAM: 32GB Corsair Vengeance LPX quad-channel DDR4-2800  GPU: EVGA GTX 1080 SC2 iCX   PSU: Corsair RM1000i   CASE: Corsair 750D Obsidian   SSDs: 500GB Samsung 960 Evo + 256GB Samsung 850 Pro   HDDs: Toshiba 3TB + Seagate 1TB   Monitors: Acer Predator XB271HUC 27" 2560x1440 (165Hz G-Sync)  +  LG 29UM57 29" 2560x1080   OS: Windows 10 Pro

Album

Other Systems:

Spoiler

Home HTPC/NAS-

CPU: AMD FX-8320 @ 4.4Ghz  MOBO: Gigabyte 990FXA-UD3   RAM: 16GB dual-channel DDR3-1600  GPU: Gigabyte GTX 760 OC   PSU: Rosewill 750W   CASE: Antec Gaming One   SSD: 120GB PNY CS1311   HDDs: WD Red 3TB + WD 320GB   Monitor: Samsung SyncMaster 2693HM 26" 1920x1200 -or- Steam Link to Vizio M43C1 43" 4K TV  OS: Windows 10 Pro

 

Offsite NAS/VM Server-

CPU: 2x Xeon E5645 (12-core)  Model: Dell PowerEdge T610  RAM: 16GB DDR3-1333  PSUs: 2x 570W  SSDs: 8GB Kingston Boot FD + 32GB Sandisk Cache SSD   HDDs: WD Red 4TB + Seagate 2TB + Seagate 320GB   OS: FreeNAS 11+

 

Laptop-

CPU: Intel i7-3520M   Model: Dell Latitude E6530   RAM: 8GB dual-channel DDR3-1600  GPU: Nvidia NVS 5200M   SSD: 240GB TeamGroup L5   HDD: WD Black 320GB   Monitor: Samsung SyncMaster 2693HM 26" 1920x1200   OS: Windows 10 Pro

Having issues with a Corsair AIO? Possible fix here:

Spoiler

Are you getting weird fan behavior, speed fluctuations, and/or other issues with Link?

Are you running AIDA64, HWinfo, CAM, or HWmonitor? (ASUS suite & other monitoring software often have the same issue.)

Corsair Link has problems with some monitoring software so you may have to change some settings to get them to work smoothly.

-For AIDA64: First make sure you have the newest update installed, then, go to Preferences>Stability and make sure the "Corsair Link sensor support" box is checked and make sure the "Asetek LC sensor support" box is UNchecked.

-For HWinfo: manually disable all monitoring of the AIO sensors/components.

-For others: Disable any monitoring of Corsair AIO sensors.

That should fix the fan issue for some Corsair AIOs (H80i GT/v2, H110i GTX/H115i, H100i GTX and others made by Asetek). The problem is bad coding in Link that fights for AIO control with other programs. You can test if this worked by setting the fan speed in Link to 100%, if it doesn't fluctuate you are set and can change the curve to whatever. If that doesn't work or you're still having other issues then you probably still have a monitoring software interfering with the AIO/Link communications, find what it is and disable it.

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Graphics Cards

×