radiators H440 Case Radiator intake or exhaust?

[Chikorita]

Hello. 

 

I got 2 new fans today Noctua NF-A14 industrialPPC-3000 PMW Fans x2

 

I want to use these 2 fans as a replacement for my current H110i GTX Liquid Cooler Fans.

I did some research and these are good rad fans from Noctua (140mm) fans.

 

So my question is : Which is the best option with these 2 new fans - intake or exhaust?

 

Here is a diagram of my current setup with the stock H110i GTX Liquid Cooler Fans in.

(not my best diagram but its understandable  ) 

 

Edited July 23, 2016 by Chikorita
Solved. Thanks for the help :)

[bgibbz]

4 minutes ago, Chikorita said:

Hello. 

 

I got 2 new fans today Noctua NF-A14 industrialPPC-3000 PMW Fans x2

 

I want to use these 2 fans as a replacement for my current H110i GTX Liquid Cooler Fans.

I did some research and these are good rad fans from Noctua (140mm) fans.

 

So my question is : Which is the best option with these 2 new fans - intake or exhaust?

 

Here is a diagram of my current setup with the stock H110i GTX Liquid Cooler Fans in.

(not my best diagram but its understandable  ) 

 

I would suggest having them as exhaust. I had mine as intakes on my h440 for a while, but they are unfiltered so was getting a lot of dust. 

[LawrenceBarnes2013]

I'd say intake since the inside temp of the case will be higher the ambient temp

[Chikorita]

1 minute ago, bgibbz said:

I would suggest having them as exhaust. I had mine as intakes on my h440 for a while, but they are unfiltered so was getting a lot of dust. 

I was actually thinking of the dust problem too if I was to go intake.

 

3 minutes ago, LawrenceBarnes2013 said:

I'd say intake since the inside temp of the case will be higher the ambient temp

See then I would run into dust problems.

[bgibbz]

2 minutes ago, Chikorita said:

I was actually thinking of the dust problem too if I was to go intake.

 

See then I would run into dust problems.

Silverstone Tek FF122 120mm Fan Filter with Magnet for Case Fan and Panel Air Vent Cooling (Black) https://www.amazon.com/dp/B006RD0U54/ref=cm_sw_r_cp_api_074KxbVEVK311

 

couple of those could work. 

[LawrenceBarnes2013]

2 minutes ago, Chikorita said:

I was actually thinking of the dust problem too if I was to go intake.

 

See then I would run into dust problems.

I know, so use filters, it would be better for your temps trust me 

[Chikorita]

2 minutes ago, bgibbz said:

Silverstone Tek FF122 120mm Fan Filter with Magnet for Case Fan and Panel Air Vent Cooling (Black) https://www.amazon.com/dp/B006RD0U54/ref=cm_sw_r_cp_api_074KxbVEVK311

 

couple of those could work. 

 

2 minutes ago, LawrenceBarnes2013 said:

I know, so use filters, it would be better for your temps trust me 

Ok I will try this setup with some fan filters. Thanks for the help guys