keep getting Qcode 60

[sakul0001]

I build my system half a year ago, but now, the mobo keep saying qcode bd for a few sec and then stop at qcode 60. I know that my board have memoryOK! to help the post but one bad thing is it changed my ram frequency from 2666 to only 1600. i have ram ddr4 2666 and i dont want to make it become ddr3. some time.

My spec:

intel i7 6950x

mobo rampage V extreme

64gb ram ddr4 kingston 2666

nvidia gta 1080 FE

case corsair 750d

intel ssd 750 800GB

psu corsair RM850x 

western digital black 3tb HDD

cooler, nezt kraken x61

[sakul0001]

bump

[xGGAx]

Read this thread:

http://www.tomshardware.com/answers/id-2456962/boot-build-error-dxe-core-started.html

 

I hope it helps

[sakul0001]

2 minutes ago, xGGAx said:

Read this thread:

http://www.tomshardware.com/answers/id-2456962/boot-build-error-dxe-core-started.html

 

I hope it helps

Well, i tried to put in one stick at a time and the result is slot D1 and D2 haveing some problem because the i did not see these sticks in bios. But after reset and press memoryOK! every thing work fine but i only got 1866MHZ. also when i install only on left channel, everything works fine and also i got 2666 mhz. i saw a few people on internet also have this problem.

[xGGAx]

Are you running the latest bios?  if you are 100% positive your ram is ok then it is time to call asus

[sakul0001]

4 hours ago, xGGAx said:

Are you running the latest bios?  if you are 100% positive your ram is ok then it is time to call asus

i bought all my ram kit 2 months ago. but i have a little worry that these kingston hyperX are not in compatible list in the mobo manual book.

[PCGuy_5960]

Do you have the new Rampage V Extreme or the old one? If it is the old one it might not support Broadwell-E out-of-the-box you will need to update the BIOS to support the 6950X...

[PCGuy_5960]

44 minutes ago, sakul0001 said:

i bought all my ram kit 2 months ago. but i have a little worry that these kingston hyperX are not in compatible list in the mobo manual book.

It doesn't matter, I didn't buy a kit that was compatible with my board and nonetheless worked just fine...

Make sure that the RAM is correctly inserted because it can click from one side and not be correctly inserted (I inserted mine upside down accidentally and yet it clicked)

You can try only one stick in slot A1 and see how it goes...

[sakul0001]

On 7/15/2016 at 3:23 PM, PCGuy_5960 said:

Do you have the new Rampage V Extreme or the old one? If it is the old one it might not support Broadwell-E out-of-the-box you will need to update the BIOS to support the 6950X...

I bought the new version of the rampage v extreme which have the 3.1 version. so im pretty sure they support broadwell-e. i tried i stick in, the pc works fine like i said above but when installing of the left channel. i just keep getting qcode 60. i tried all of the ram in A1 like put one different stiack at a time to see if any of them broken, but all of them work just fine. no error or anything

[PCGuy_5960]

You can try updating to the latest BIOS and if that doesn't work then your CPU or motherboard may be defective... 

[PCGuy_5960]

Is it this :

https://www.asus.com/Motherboards/ROG-RAMPAGE-V-EDITION-10/

Or this:

https://www.asus.com/Motherboards/RAMPAGE_V_EXTREME/

 

[sakul0001]

On 7/17/2016 at 7:37 PM, PCGuy_5960 said:

Is it this :

https://www.asus.com/Motherboards/ROG-RAMPAGE-V-EDITION-10/

Or this:

https://www.asus.com/Motherboards/RAMPAGE_V_EXTREME/

 

its the rampage V extreme. the below one

[PCGuy_5960]

23 hours ago, sakul0001 said:

its the rampage V extreme. the below one

It needs a BIOS update for Broadwell-E... Download the latest BIOS from the ASUS website and flash it... If you can't send it back to ASUS and they will fix it...

(Sorry for replying so late BTW)