[Build Log] Project Ice Dragon - CaseLabs SM8 | Z170 WaterCooled | i7 6700K | GTX 1080 | 4K

[Revan654]

[Revan654]

Bitspower really should rethink their one D5 top. You can not use 16mm fittings on the pump since the two ports are very close to one another. Which makes it impossible to for any other fitting including plugs to fit together. You have to use an extender on the one port(s).

[Revan654]

[Revan654]

 

My Drain + inlet line to my first Pump.

[Revan654]

[Revan654]

 

[Revan654]

[Revan654]

 

As much as I like the S8S, The one major draw back it always had was space. It's very difficult to place two pumps inside the case and still have it look nice.

This was the best I could come up with. It also seems that 1080 EK blocks are taller compared to the 980 Ti. Which cancelled out dual 360 on the top.

 

I might move it to my SM8 Case, I'll see what I can do with my S8S tonight.

[Revan654]

 

S8S is just to tight to fit everything. I have zero room for my drain, Going to try a few things with my SM8 Case I still have. Not sure if I'll use the peds or not.

 

Here is the original Concept of the loop for my SM8.

[samiscool51]

[Revan654]

[sl06bhytmar]

Err about 30 fans 

[Revan654]

18 minutes ago, sl06bhytmar said:

Err about 30 fans 

25, but who's counting?

[Revan654]

[Revan654]

[Revan654]

 

[Revan654]

[Revan654]

[Revan654]

[Revan654]

[Revan654]

 

Looks like I'm going have to use some Soft tubing for connecting the different sections. No way I can get into the pedestals once I place them on the case.

[Revan654]

[samiscool51]

your build: 

Spoiler

my current system, the dell latitude E6330:

Spoiler

 

[IAmAkiro]

@Revan654 I would like to see Benchmarks + temps on full loads, also epic build!

[Revan654]